Senior Instrument Comm. Tech., REFLETECH ENGINEERING ENT. - Bataan, Philippines

Electrical Technician, YUHANTECH PHILIPPINES INC. - Bataan, Philippines January 04, 2021 - December 27, 2021

March 29, 2019 - December 16, 2019

Calibration and testing of pressure, temperature, flow transmitters and gauges, including fixed and portable fire and gas detection equipment and carry out gas/liquid flow metering and calculation ensuring accurate in the same calculation. Responsible for the Plant’s Commissioning during all class of shutdowns. ·Updates all calibration data records to reflect current status of instruments and equipment. Involved in all electrical and lighting works such as inspection of all lighting fixtures, replacement of all busted electrical materials like bulb, lighting tube and ballast etch. Perform isolation/de-solation of all electrical equipment’s up to voltage level certified after taking the required isolation certification test. Conduit and wiring installation form Motor Control Center (MCC) to transformers and motor. Maintain, repair, install and test switchgear, transformer, switchboard meters, regulators and reactors. Instrument Commissioning Technician, KENTECH/BP - Tbilisi, Georgia Lead Instrument Comm Technician, KENTZ/RASGAS - Plat Form Offshore Project, Qatar August 29, 2016 - December 31, 2018

October 27, 2013 - June 04, 2014

Multi-tasking for all Instrument Commissioning Technician jobs such as fire and gas system, power generation solar turbine, gas compressor, Instrument Air, HVAC, Water bath heater Package and gas metering skid system handover to operation. Loop testing and commissioning of various type of instrument such as temperature, flow, level, pressure transmitter, control valves, vibration, and axial and key phasor probe for monitoring system of compressor. Managed and motivate a Team of Technicians to maintain the highest safety performance while keeping the focused on the task at hand. Track punch list closure for Commissioning “B” checks sheets and dynamic procedures. Witnessed and supervise the SAT activities for Control Systems performed by vendors. Wellhead control panel, manifold HPU, test separator/pig launcher, Nitrogen generation package, MEG injection system, Instrument and Plant Air system, Life boat System, HVAC system. Assist and advice the functional loop check team in troubleshooting Control Systems related problems while also ensuring all safety rules are enforced and followed in the field.

ABOUT ME A motivated and experienced Instrument Commissioning Technician with fifteen (15) years of experience in the field of electrical and instrumentation work in Oil and Gas Industry. Very knowledgeable and exposed to plants start-up, fault and problem diagnosis, installation and construction including being a team leader. EXPERIENCE

Job Inclusions and Summary

Instrument survey, vendor assistance, repair, calibration, testing and monitoring process instrument particularly in modification of control system, revamping,

construction, electrical and instrument inspection. Core Skills

adrfcq@r.postjobfree.com

www.linkedin.com/in/joey-

lalis-b1181736/

+63-918-***-****

+63-948-***-****

Senior Instrument Commissioning Technician

JOEY P. LALIS

Process engineering documentation including Loop Drawing block diagrams, P&ID’s, data sheets

Tracking record with Industrial computer systems DCS, ESD, F&G and PLC equipment

Knowledgeable to Commission Foundation Field bus and Hart instrument such as switches, transmitters and other valves etc. Instrument Comm. Tech., KENTZ/RASGAS - Plat Form Offshore Project, Ulsan, Korea Instrument Commissioning Technician, PDO-ORION - Oman April 25, 2013 - September 01, 2013

February 25, 2011 - January 15, 2012

Ensures that the system commissioning acceptance test (SCAT) and Site Acceptance Test (SAT) are being followed and completed. Prepares work pack, walkdown inspection and reporting including field inspection, testing and reporting and materials inspection.

Calibration of all various types of process of instruments. Loop package preparation and project completion system documents, review the pre-commissioning and commissioning procedures for all installations under responsibilities

(field instrumentation, plant control systems, and Fire and Gas units on line analyzers). Senior Instrument Commissioning Technician, DAELIM - Petron, Bataan, Philippines Senior Instrument Commissioning Technician, KENTZ/SEIC - Sakhalin, Russia June 2009 - November 2009

August 10, 2007 - April 28, 2009

Up-graded instrument and control system of gas turbine compressor. assigned in commissioning of process instrument and system under technical division, loop checking, calibration, trouble shooting. Leak testing of all impulse line air headers, signal line. Included also in commissioning and testing of well head control panel, fusible plug and ESD panel.

Worked with various vendors for commissioning of gas turbine general equipment and compressors auxiliary system supplied by G.E. Bouvo Pignone. Loop check and commissioning of oil separation and stabilization, inlet gas separation/gas dehydration and vapor recovery compressor / scrubbers, interface signal testing between PCS of Process Control System loops using Delta V control system software. Ensured that the work in the area of responsibilities is carrying out in accordance with complex Healthy Safety System and Environment (HSSE). Senior Instrument Commissioning Technician, KENTZ/DEM - Sakhalin, Russia Instrument Comm Technician, BECHTEL - Malabo Equatorial Guinea, West Africa February 14, 2007 - July 01, 2007

February 23, 2006 - August 23, 2006

Ensure that the repair request/job, calibration of all electronics instrument and control valves. Loop testing and commissioning of various type of instrument such as temperature, flow, level, pressure transmitter, control valves, vibration, axial and key phasor probe for monitoring system of compressor. Commissioning of 6KG essential generator – CAT, frame V units (32MW power generation – gas turbine – Nuovo Pignone). Pneumatic recorders and indicators differ only in that they always operate from a standard 3 to15 psi or 20 to 100kPa signals, the indicator scale or recorder chart. Loop check of fire gas system. Instrument Comm Tech, D.J. ROQUE CONST. CO. INC - Bataan, Philippines Instrument Commissioning Technician, S.A. KENT - Saudi Arabia October 2005 - January 2006

August 2001 - August 2004

Calibration of all various types of process instruments such as temperature, level, pressure transmitter, and control valves and also commissioning of tank gauging system. Provided system and sub-system list for all instrument equipment, prepared pre-com and commission procedures. Mark-up drawing as per sub-system limit, supervised all pre-commissioning / commissioning activities within the respect. Prepared sub-system description for each designated Instrument sub-system as requirements for Mechanical Completion Certificate (MCC).

Instrument Comm Technician, ALLTECH CONTRACTORS INC. - Bataan, Philippines Instrument Commissioning Technician, EEI CORP - Bataan, Philippines December 1998 - December 1999

April 1998 - November 1998

Calibrated components and instrument as per manufacturers manuals, inspect and test operation of instruments according to the specification and requirements based on the instruments data sheets. Encoded instruments technical data and online calibration for its calibration certificate by using Beamex Quality Manager QM6 Software. Inspect and consult installation manuals, P&ID, and AFID for the instruments proper installation. Ensure that the procedure written in the Inspection Test Report (ITR) is compiled and accomplished. Interpret P&ID instrument location drawings, ladder, logic,and instrument/process loop drawings. Ensure that the system commissioning Acceptance test (SCAT)and Site Acceptance Test(SAT)are being followed and completed. Instrument Inspector, SAMSUNG ENG. AND CONS. - Taiwan February 1997 - February 1998

Review project specifications, P&I Diagram and Instrument diagrams. Prepare work pack, walk down inspection and reporting, field Inspection, Test and reporting, material Inspection and progress reporting. TRAININGS AND

SEMINARS

Oarn Alam, Sultanate of Oman

February and April 2011

EDUCATION General Radio and

Comm Opertator

University of the East, Phil.

1993 - 1995

Safety Induction, H2S Awareness and

Escape, Safety Leadership for Front Line

Supervision and Gas Tester, STOP (Safety

Training for Observation Program for

Supervisor)

Basic H2S and Self Contained Breathing

Apparatus Familiarization, Basic Offshore

Safety Induction and Emergency Training

International Maritime & Offshore Safety Training Institute September 28 - 30, 2013

Safety Observation and Conservation,

Behavioral Observation Safety System,

SCPZ Commissioning Performing

Authority Level

July 11, 2016 and

August 09, 2016

Mechatronics Technologies

Corporation, UP Diliman, Q.C.

Dec 2009 - January 2010

Job Safety Analysis

Instrumentation Control

Servicing NC II

Brazan Offshore Project,

Ulsan, South Korea

August 21, 2013

Contact this candidate