Mobile no Qatar : +974-********
India no : +91-978*******
Email : email@example.com
Skype id : aishsss1234
Diploma in mechanical engineering holder with 12 years of experience in process, maintenance, commissioning pre- start up of petrochemicals and oil and gas refinery industries in both onshore and offshore sites of abroad as a Senior Mechanical Technician, Mechanical Supervisor
Preparing work permit and take a lead.
Receive work schedule from Supervisor and co-ordinate all activities with operator to troubleshoot and to solve the problem on equipment.
Daily routine inspection with plant inspection and monitoring the temperature vibration of whole rotating equipments.
Equipment maintenance history updating and record keeping.
Responsible for repairing, troubleshooting, preventive, periodic and corrective mechanical maintenance activities of rotating equipments and static equipments.
Designation: Mechanical Supervisor
Period : May 2016 –Continue
QAPCO,(QATAR PETROCHEMICAL COMPANY), QATAR
Designation: Mechanical Technician
Period : Aug 2007 to may 2012
● GAS TURBINE ● MECHANICAL SEAL ● ALLIGNMENTS
● COMPRESSORS ● VALVES ● Fin fans
●MEASURING INSTRUMENTS ● GEAR BOX ● PUMPS
Onshore & Offshore processing plant
Having hands on experience in preventive, productive and breakdown maintenance of all static equipment and rotating machinery used in oil and natural gas processing plants.
Well experienced in crude stabilization unit (3phase). Gas Dehydration unit(TEG), Gas Sweetening unit (MDEA) condensate fractionation unit, Dew point Depression unit, water injection unit, Gas injection unit, unmanned platforms & offshore water maker, fire water pumps, seawater lift pumps, Gas turbine drive compressor & Booster pumps and also worked ONSHORE CNG compressor unit for British gas.
Having good erection experience in rotary equipment like air compressor, refrigeration compressor, pump and welding inspection as per the design drawing (ASME Design)
Carried out combustion chamber and Hot Gas path of GE (Frame 6) and Nuvo pignone (Frame 5) Gas Turbines under guidelines of turbine engineers.
GE - Frame 6 - 32MW- Single shaft Generator Driven
Nuovo pignone - Frame 5 - 28 MW- Single shaft Generator Driven
Solar Turbine & Ruston Turbine - 2.0 MW, Single shaft Generator Driven
Assembly, Disassembly and Inspection of Turbine blades, vane segments, compressor Diaphragms, combustors, Transitions and Fuel nozzles.
Turbine bearing changing and its oil circuit and compartment cooling equipment maintenance & Alignment of Turbine inter stage seals.
Worked in Dresser Clark, Dresser Rand (France), Kawasaki cooper (Japan) and Nuvo pignone (Italy) natural gas pumping and Gas lift centrifugal compressors with seal and dry gas seal system with various capacities.
Involved in bundle changing, rotor centring, seal changing and bearing changing balancing drum labyrinth changing stage labyrinth changing, thrust collar fixing and its seal and lube oil circuit accessories maintenance.
Reciprocating Air & Gas compressor
MAKE: INGERSOLL RAND, KIRLOSKAR, NUVO-PIGNONE, ATLASCOPCO.
Dismantling and inspection of main bearing, big end bearing, small end bearing, cross head, thrust washer, oil pump gear clearance inspection as per OEM instructions.
Cylinder side clearance, cylinder Orality inspection and piston pumping clearance, TDC,BDC inspection, suction and delivery valve, opening clearance inspection
All these clearance inspected through the inside outside micro meter, dial gauge micro meter, bore gauge micro meter, filler gauge and lead wire
High-pressure cut-off switch, high temperature cut-off switch, oil pressure cut-off switch, and timer setting.
Operation maintenance and troubleshooting of different makes of screw compressor like Ingersoll Rand, kirioskar Chicago pneumatic, ELGI etc.
Having good experience in screw compressors all control systems like pressure limiting valve, pressure sensing valve, blow off valve, vent valve, shuttle valve, suction control butterfly valve with cylinder actuator, oil stop valve, air oil separator inspection and replacement.
MAKE: WORTHINGTON ENGLAND, AND SHIN NIPPON & KIRLOSKAR .
Handled numerous types and Design of centrifugal, Reciprocating and rotary pumps, size of the equipment vary from small to large and working in low, moderate and high temperature medium including vertical pumps. Vacuum Pump of different types.
MAKE: SEALOL, JOHNCRANE, DURAMETALLIC
Worked on all type of seals including single and double and tandem seal single spring and multi spring bellow type proper rectification of the same.
Worked on all types of gearboxes, Attended preventive maintenance and breakdown maintenance.
Done gear clearance setting, bearing alignment setting, oil seal checking and replacing.
Reverse indicator method
Rim & Face method and Laser method
MAKE: HUDSON, NUOVA PIGNONE.
Replacement of blades.
Measure and adjust blade angle, tip clearance.
Adjust belt tension.
Service and operation inspection of all types of valve like:
Blow off valve
Diaphragm form valve
Non return valve (Flab type & plate type valve)
Piston type NRV Automatic Pneumatic Actuators control valve in utility department.
Handled various types of measuring instrument which are given below:
Dial Gauge (for alignment)
Vibration scanner (in mm/s)
H2s prevention (SCBA).
Fire safety use extinguisher (DCP, CO2, Foam and water).
Use PPE depends up on the job.
Using the harness depend upon the height.
Operation of fire houses and always keep good Housekeeping
Using the brigade tapes according to job (Red white/ yellow black).
Follow the instruction of life borty, life craft, life boat clamming ladder life jacket.
DIPLOMA IN MECHANICAL ENGINEERING(PERCENTAGE:7.2CGPA)
Saisha international corporate university
Kelambakkam, Chennai, Tamilnadu, India
Year of completion: 2015
National Trade certificate(NTC)[PECENTAGE-83%]
Government ITI, Ulundurpet, Tamilnadu, India
Year of Completion: July 2007
Secondary Course Certificate(S.S.L.C)[PERCENTAGE-70%]
Board of Secondary Education, Tamilnadu, India.
Year of Completion: Jan 2005
Fork lift driving license
Ministry of interior traffic department, Qatar
Basic First Aid & CPR
Basic Fire Fighting
Confined Space Entry
Working at Height
Man lift & scissor lift
Name : SURESH
Father’s name : Ganesan
Date-of -birth : 20/05/1989
Sex : Male
Marital status : Married
State : Tamil Nadu
Nationality : Indian
Religion : Hindu
Address : 2/23A, south street, Koothakudi PO
Languages known : English & tamil (speak,read &write)
Passport No : U0915561
Date of Issue : 19/02/2020
Date of Expiry : 18/02/2030
Place of Issue : Qatar
Emigration status : ECNR
I hereby declare that the above information is true and correct to the best of my knowledge and belief.