Draftsperson/Computer Aided Design Drafting

RENATO S. DIEGO

Well experienced in both AutoCAD and MicroStation in a multi-discipline 2D computer

aided design drafting basic knowledge of 3D MicroStation Select Series 1, 2 & 3. Over forty years (40) experience in the field of detailed engineering for construction and fabrication design drafting related to Oil & Gas facilities (Onshore/Offshore), Petrochemicals, Iron Ore mining and Electrical Industrial equipment of detailed fabrication drawings. Experienced in Manual and Computer Aided Design Drafting in a multi-discipline category, for both AutoCAD and Intergraph MicroStation. Direct involvement in preparation of detailed design drawings as required by the project, as-built existing plant facilities. Experienced as CADD Coordinator/Checker. Checking and distributing workloads to CADD Operators. Developed CADD drafting techniques and drawing templates to facilitate task. Involved in onshore/offshore commissioning and offshore hook-ups. Prepares system drawings for system dossiers turned over. Coordinating Design input with the engineers in site installation and production for fabrication of fiberglass pipes, fittings and spools

(GRE/GRP). Prepares bill of materials (BOQ) base on drawings. As a Composite Services Officer with BHP Billiton in Newman WA, I was responsible for the Composites services drawing updates. Issues excavation and penetration PERMITS. Liaise with the surveyors to ensure that the composites services drawings are up to date. Updates grid sheets drawings to the latest surveys. To ensure safety of personnel conducting excavations at Mt Whaleback and in the Newman township, to ensure the protection of underground services and to meet the requirements of MS&IR; R5.13. WORK EXPERIENCE:

Mechanical Draftsperson – BHP Billiton Iron Ore Pty Ltd (Dec. 9, 2013 to July 25, 2019) Nelson Point Port Hedland, WA

Reporting to the Engineering Standards & Control Change Superintendent–RAIL Engineering.

Create new drawings and updated existing technical drawings, as built drawings related to Rail Operations. Ensure that the Rail Operations technical drawings are correctly designed and drafted within the WAIO Standard Engineering Practice. Support Operations, Maintenance Engineering and Projects functions with the creations and updating drawings. Produced scheduled reports on the status of site’s drawing submission, workloads and back logs. Mentor and guide existing new and contract Draftspersons in our drafting practices.

Composite Services Officer/Draftsperson – BHP Billiton Iron Ore Pty Ltd

(May 14, 2012 to Dec. 6, 2013) Newman, WA

Reporting to the Engineering Standards & Control Change Superintendent. Responsible for the Composites services drawing updates. Issues excavation and penetration PERMITS. Liaise with the surveyors to ensure that the composites services drawings are up to date. Liaise with the Electrical Supervisors with the issuance of permits. Updates grid sheets drawings to the latest surveys. Ensure that they have been surveyed before back filling. To ensure safety of personnel conducting excavations at Mt Whaleback and in the Newman township, to ensure the protection of underground services and to meet the requirements of MS&IR; R5.13.

DUTIES AND RESPONSIBILITIES:

• Ensure conformance with the BHP Billiton Charter, the BHP Billiton Group Level Documents, Code of Conduct and relevant statutory obligations.

• An overriding commitment to health, safety, environment responsibility and sustainable development.

• Maintain and revise plans of mining and Network Operator areas showing the location and details of:

• All high voltage cabling and equipment;

• Mains switches;

• High and low voltage cables installed underground;

• All overhead power line routes;

• All fixed water service pipeline routes;

• All communications services installed underground;

• All other buried services that might be impacted by excavation activity; and Management of the Excavation permit process including plotting and issuing of plans as required for the purpose of Excavation permits.

SENIOR MECHANICAL DESIGNER: WORLEY PARSONS SERVICES PTY LTD. PERTH, WA

(December 11, 2006 May 10, 2012) (Project Management, Consulting and Engineering) Computer Aided Design drafting using AutoCAD 2005, 2006 & 2008 and MicroStation V7, V8 & V8i

Reporting to the Lead (Chief) Designer. Created new drawings and updated existing drawings related to Mechanical/Piping, Process, Electrical & Instrumentation, Mechanical and Structural Engineering designs in water treatment and desalination plants, pumping stations, power station plants, mining and oil and gas facilities. Prepares As-built drawings according to site as-built inspections and surveys. Responsible for drafting and design within the discipline area as instructed. Review and check drawings to ensure conformity with company and client design and drafting standards. Prepares detailed design drawings for various projects, International and across Australia. Senior AutoCAD Draftsperson: South West Group PTY LTD. (SWG) (Bunbury, WA)

(APRIL 3. 2006-Aug. 21 2006) (Project Management, Consulting & Engineering Fabrication)

Computer Aided Design drafting using AutoCAD 2006 and AutoCad 2007 Reporting to the Lead Draftsperson. As a Senior Draftsperson, I am responsible for developing our working electronic library of all design drawings produced by the company. Maintain library of all hard copy drawings (Master Copy). Control drawing register with regards to revisions. Control issue of drawings. Doing mechanical & structural drawings for fabrication and project procedure drawings. Liased with the Commercial Manager for tender documentation and drawings. Assisted in producing method statement drawings for tender documents.

AUTOCAD DESIGN ENGINEER: FRASER DIVING PTY LTD (DUBAI, U.A.E.) & PERTH, WA

(Sept. 14. 2002, to Dec. 20, 2005) (Marine Engineering and Oil & Gas offshore services) Computer Aided Design drafting using AutoCAD 2000

Reporting directly to the Operations and Base Managers. Develops a working electronic library of all design/equipment drawings produced by the company. Maintain library of all hard copy drawings (Master Copy). Control drawing register with regards to revisions. Control issue of drawings. Proof checked all drawings prior to issue. Proof check drawings submitted by outside services. Liased with Operations Manager/Base Manager and Technicians to improved quality of technical information with regards to equipment as- built and upgrades/modifications to equipment. Produced procedure drawings for the installation of underwater sub-sea pipelines and recovery. Ensure information is available to other FDI operating areas. Visit offshore worksites and when required for design measurements and calculations. Specify material take-off from design drawings. Assisted Commercial and Operation Managers in producing method Statement drawings for tender documents.

PIPING DRAFTSMAN: KCC PROCESS EQUIPMENT INT’L. LTD. (ABU DHABI, U.A.E.)

(Jan. 09, 2002 to June 11, 2002) TEMPORARY PIPING DRAFTSMAN (OIL & GAS) Computer Aided Design Drafting using AutoCAD LT98 & AutoCAD 2002 Created new drawings related to Piping Engineering designs in oil and gas and updated existing drawings. As-built drawings according to site as-built inspections and surveys. SENIOR DESIGNER: J. RAY MC DERMOTT MIDDLE EAST S.A. (DUBAI, U.A.E.)

(May 13, 2001 to Nov. 30, 2001) (Temporary) Project Contract only Using AutoCAD 14, AutoCAD 2000 and MICROSTATION 'J' Assigned as Senior Designer in Elect. & Inst. Dept. Develops project details from sketches and/or specification involved by elect. & Inst. engineers using specification, sketches, etc. Coordinated with other department to ensure proper design interface and reconcile conflicts. Participate in design review with design engineers. Determines most effective layout of instruments & cable trays. Checked instrument installation details. Prepares take-off for instrument and electrical materials.

Design Draftsman/Engineering Coordinator: Future Pipe Industries L.L.C. Using both AutoCAD 14 & 2000 and MicroStation ‘J’

(Abu Dhabi, U.A.E.) (Dec. 14, 1998 to May 8, 2001) Coordinates engineering design input and schedules with the client’s Projects Coordinator and Engineers. Coordinates with the site Engineers for site installation and in the production for the fabrication of pipe fittings and spooling. Prepares isometric drawings base on the piping layout and the general arrangement drawings. Also checks and prepares shop floor drawings per spool and detailed fabrication drawings of fiberglass pipes & fittings, spooling. Pipe support details. Follow up production and delivery status. Prepares Bill of Materials. Prepares weekly and monthly progress report. Also prepares monthly Projects updates. Using both AutoCAD 2000 and Microstation 95 in a Computer Aided Design Drafting.

Design Engineer B: J. RAY Mc DERMOTT MIDDLE EAST S.A. (Dubai, U.A.E.) (Jan. 30, 1997-Dec. 1, 1998) (Oil and Gas, offshore and onshore engineering and construction) Using AutoCAD Rel. 13 & 14

Assigned as Design Engineer B in Elect. & Inst. Dept. Develops project details from sketches and/or specification involved by elect. & Inst. engineers using specification, sketches, etc. Coordinated with other department to ensure proper design interface and reconcile conflicts. Participate in design review with design engineers. Determines most effective layout of instruments & cable trays. Checked instrument installation details. Prepares take-off for instrument and electrical materials. Complete data sheets and specification for bulk materials. Develops, provides & revises elect. & Inst. studies, list drawing schedules, etc. Carries out single and multi-discipline checks and reviews. Updated and revises drawing’s electronic files in AutoCAD 14. Prepares as-built marked- ups and updated electronic files. Review vendor documents. Involves in Hook-up and Commissioning Team for Ras-Laffan LNG. CO. field offshore, Central Complex. Responsibilities also include Loop checking, installation check-up, instrument tubing pressure testing, as-built drawings and prepare system drawings for system dossiers submission.

CAD DESIGNER I: ARABIAN CONSULTING ENGINEERING CENTRE: (SAUDI ARABIA)

(Feb. 22, 1992 to Dec.30, 1996) (Affiliated with Stone & Webster Eng’g. Co.) Using AutoCAD Rel. 12 and Microstation Ver. 5 and '95 Assigned as CADD Coordinator / Designer for SADAF and ARAMCO CADD Department. Coordinated with engineering design input changes and deadlines. Responsible for checking, distribution of workloads and follow-up to Cad operators to meet deadlines. Revised Issued for Construction drawings using MicroStation Ver. 5, I/Ras and AutoCAD Rel.12. In multi-discipline design drafting. Check Caddied drawings according to SADAF and ARAMCO drafting standards. Developed Instrument Loop Diagram templates and drafting techniques to facilitate the task. Converted AutoCAD drawings to MicroStation and vise-versa. Prepares a print of views needed to be review in PDMS (Design Review) in coordination with the process & piping engineer. Responsible for safekeeping and control of electronic files and softwares. And for the daily, weekly and monthly back up of electronic files from the network. Coordinated the updating of scanned drawings using MicroStation compatible, Computer Aided Design Drafting System utilizing interactive raster for PC (I/RAS PC) (DESCARTES) by vector ised and incorporating marks-ups on field verified drawings to reflect the existing as-built condition. Prepared Fiber Wide band Block Diagrams for new existing ODEC equipment power supply, hot line circuits for ODEC network Block and Level Diagrams, Digital Microwave Schematics, Telecommunication Switch Details, Disaster Control Drawings, HVAC and Communication Building Layouts. Piping and Instrument Diagrams, Pipe Support Details, Skid layout and details, Piping Plans and General Arrangement layouts. Drainage and Sewerage System layouts. CAD Operator/Draftsman I: HAWA Electric Panel Board Factory (Dammam, K.S.A)

(Nov.15, 1989 to Dec. 30, 1991) Using AutoCAD Rel. 10 and Manual Drafting. Prepared drawing layouts for high voltage & low voltage electrical equipment such as Substations layouts, Motor Control Centers, High & Low Voltage Switchgears, Panel boards and Control Panels. Drawings also include One Line Diagrams, Single Line Diagrams, Control Wiring and Internal Diagrams. Prepared detailed standard layout drawings for fabrication. Prepared technical sketches and final drawings for project proposals, fabrication drawing using AutoCAD Rel. 10 Converted manually created standard drawings into CADD format.

DRAFTSMAN 1 TO LEAD DRAFTSMAN: BETA ELECTRIC CORP. (MANILA, PHILIPPINES)

(Sept. 1977 to Nov. 1989) Manual and AutoCAD Drafting using AutoCAD Rel. 9 Under the direct supervision of the Engineering Manager. Prepared technical sketches and plans of drawings such as High & Low Voltage Switchgears, Substation Layouts, Motor Control Centers, Electric Panel boards and Control Panels as designed by the engineers and as requested by the client. Prepared detailed standard fabrication drawings and Electrical Wiring Diagrams. Prepared arrangement drawings for cutting schedules of sheet metals for fabrication. Responsible for the files and control of all Engineering and Fabrication drawings. Responsible for ordering and issuance of materials needed in the drafting division for the Engineering Department. Prepared visual aids for the company's annual report and presentation and performs other related task, as may be assign from time to time. Converted manual drawings to CAD. Prepared computer aided design drawings using AutoCAD Rel. 9.

EDUCATION

BS in ARCHITECTURE

Mapua Institute of Technology, Manila Philippines

1974-1979

PERSONAL DETAILS

RENATO S. DIEGO

012 Rizal St. Brgy. 8 Acosta Batac City Ilocos Norte, PHILIPPINES 2906 E-mail: *****.******@*****.***

Mobile numbers: +639********* & +639*********

Landline: +632*********

Contact this candidate