Welder Welding
Resume:
LANKA MADHU
WELDER (SMAW, FCAW, MIG)
OBJECTIVES:
Seeking a challenging position in a reputed organization where I can learn new skills, expand my knowledge, and leverage my learning.
WORK EXPERIENCE:
COMPANY : Zagreb Montaza d.o.o
POSITION : Welder – (SMAW, FCAW, MIG)
LOCATION : Croatia
DURATION : April 2021 to Till now
PROJECT : Bridge Construction
EQUIPMENT HANDLED: Oxy acetylene gas cutting, MIG/CO2, Plasma/Gas cutter. DUTIES AND RESPONSIBILITIES:
Analyze blueprints and structural drawings to layout the framework of a structure.
Set equipment to weld in vertical, horizontal, flat or overhead positions.
Inspect and evaluate welds to ensure they are free of defect and conform to set specifications.
Calibrate welding tools and equipment according to the parameters listed in the welding procedure specification.
Carry out post-welding treatment of structures by cleaning, buffing, and polishing finished work pieces.
Secure and fasten structural components using clamps, braces, jacks, and bolt straps. COMPANY : Brodo Split Shipyard
POSITION : Welder/Structural/Fabricator
LOCATION : Split, Croatia
DURATION : November 2019 to April 2021
PROJECT : Ship Building
EQUIPMENT HANDLED: Gas Cutter, Oxy Acetylene and Jack Hammer. DUTIES AND RESPONSIBILITIES:
Supervise the welding parameters like welding current, voltage, travel speed etc. w.r.t Qualified WPS/PQR/WPQ.
Controlling the welding interpass temperature during welding by thermocouple w.r.t qualified WPS.
Operate the automatic welding machine like TIG, MIG & PULSE welding of Galvanized Stainless steel Tanks.
Perform different kind of assembly inner tank, outer tank etc.
Full welding of all joints, the base plate to beams. The trusses and others.
Fit up and weld visual as per drawing and specification. COMPANY : C4 Fabrications
POSITION : SMAW, FCAW, 6GR Welder
LOCATION : Hindhustan Shipyard, Visakhapatnam
DURATION : August 2018 to November 2019
PROJECT : Ship Building
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill DUTIES AND RESPONSIBILITIES:
Conduct Inspection for the root gap for proper penetrations.
Conducted full welding of flange, cylinder, pipes and plates
Set –up welding equipment
Read blue prints and drawings and take or read measurements to plan layout and procedures,
Prepared requisition of metal tools and equipment
Pre-heat the welded material before welding
Basic repair of welding machine
Follow the welding procedures specification (WPS)
Follow the safety practices and procedure.
Clean area before leavin
COMPANY : Kelvin Thermal Solutions SAS
Company
POSITION : Assembly/ Orbital Welder
LOCATION : Doha, Qatar
DURATION : January 2018 to May 2018
PROJECT : Manufacturing Boilers
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Read blue prints and drawing for proper procedure of production.
Set up welding machine and follow safety procedure practices.
Full welding of all parts using MIG welding and follow the welding specification procedure (wps)
Prepare all tools, materials, needed in assembling, the torque, screw, nut, Bolts and others. Confirm to the line leader for proper Installation assemble.
Dismantle engines and repair or replace defective parts, such as magnetos, carburetors, and generator
Repair and adjust motorcycle subassemblies such as forks, transmissions, brakes,and drive chains, according to specifications.
Replace defective parts, using hand tools, arbor presses, flexible power presses, and power tools.
Reassemble and test subassembly units.
Disassemble subassembly units and examine condition, movement or alignment of parts visually or using gauges.
Listen to engines, examine vehicle frames, and confer with customers in order to determine nature and extent of malfunction or damage.
Check each parts if have the printed marked name and match to the production arrangement plan
COMPANY : Alstom Transport India Ltd.
POSITION : Welder / SMAW, GMAW
LOCATION : SriCity, Tada
DURATION : April 2016 to January 2018
PROJECT : Metro Trains Manufacturing
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Performed as full welding of metal sheets and pipe used in installation and replacement of busted pipes and repair purposes.
Prepare materials, fabricate in actual layout to assign area.
Install base plate anchoring bolt for pipe rack.
Fabricate metal frame, full bolt welding of trusses.
Full welding of pipes and cutting sheet.
COMPANY : Hindustan Shipyard Company
POSITION : Welder / SMAW, GMAW
LOCATION : Visakhapatnam
DURATION : August 2015 to March 2016
PROJECT : Ship Building
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Performed as full welding of metal sheets and pipe used in installation and replacement of busted pipes and repair purposes.
Prepare materials, fabricate in actual layout to assign area.
Install base plate anchoring bolt for pipe rack.
Fabricate metal frame, full bolt welding of trusses.
Full welding of pipes and cutting sheet.
COMPANY : Baku Shipyard Elite Marine
POSITION : Welder / SMAW, GMAW
LOCATION : Baku, Azerbaijan
DURATION : January 2014 to Febraury 2015
PROJECT : Rig Maintanance
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Performed as full welding of metal sheets and pipe used in installation and replacement of busted pipes and repair purposes.
Prepare materials, fabricate in actual layout to assign area.
Install base plate anchoring bolt for pipe rack.
Fabricate metal frame, full bolt welding of trusses.
Full welding of pipes and cutting sheet.
COMPANY : Hindustan Shipyard Company
POSITION : Welder / SMAW, GMAW
LOCATION : Visakhapatnam
DURATION : September 2008 to December 2013
PROJECT : Ship Building
EQUIPMENT HANDLED: Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Performed as full welding of metal sheets and pipe used in installation and replacement of busted pipes and repair purposes.
Prepare materials, fabricate in actual layout to assign area.
Install base plate anchoring bolt for pipe rack.
Fabricate metal frame, full bolt welding of trusses.
Full welding of pipes and cutting sheet.
COMPANY : B.T.N.G Engineering Pvt. Ltd
POSITION : Welder / SMAW, GMAW
LOCATION : Singapore
DURATION : July 2005 to March 2008
PROJECT : Ship Building
EQUIPMENT HANDLED : Grinder, Hand Drills, Pencil Grinder, Press Drill Air Torue DUTIES AND RESPONSIBILITIES:
Performed as full welding of metal sheets and pipe used in installation and replacement of busted pipes and repair purposes.
Prepare materials, fabricate in actual layout to assign area.
Install base plate anchoring bolt for pipe rack.
Fabricate metal frame, full bolt welding of trusses.
Full welding of pipes and cutting sheet.
TRAINING:
SMAW NCII WELDING
(TESDA) (Shielded Metal Arc
Weld.)
Diversified Corporation
NC II SMAW
WELDING
PERSONAL INFORMATION:
Age : 33
DOB : August25, 1988
Place of Birth : Visakhapatnam
Civil Status : Married
Gender : Male
Height : 5’3”
Weight : 73
Citizenship : Indian
Driving Liscence : Level B
Contact Number : +91-888*******/ +385-*********
Education:
SSC: Passed in March 2004
Z.P.High School- Aganampudi, Visakhapatnam, Andhra Pradesh. ITI (Welder): July 2011
Sri Vemana I.T.C – Gajuwaka, Visakhapatnam, Andhra Pradesh. Diploma in Mechanical Technology: May 2017
International Council of Education and Technology- Hyderabad, Andhra Pradesh.
Other Courses:
NCVT (Welder) Govt. of India – July 2011
BEHRA INSTITUTE OF MARITIME TRAINING (Approved by D.G.Shipping, Govt. Of India) – May 2019
Documentation details:
Passport: K2278744 From 27-06-2019 to 26-06-29
Survival: 19ZM0059 Exp: UNLIMITED
Seaman’s Book: V0112512 Exp: 26-06-2029
SECURITY TRAINING FOR SEAFARERS WITH DESIGNATED SECURITY DUTIES: Date Of Issue : 15-05-2019
Date Of Expiry : UNLIMITED
PERSONAL SURVIVAL TECHNIQUES;
FIRE PREVENTION AND FIRE FIGHTING;
ELEMENTARY FIRST AID; AND
PERSONAL SAFETY AND SOCIAL RESPONSIBILITIES
Date Of Issue : 13-05-2019
Date Of Expiry : UNLIMITED, Subject to refresher Training every 5 years for Personal Survival Techniques and Fire Prevention and Fire Fighting. CHARACTER REFERENCE:
P.Ramana Murthy
Foreman
(Watsap Number)
I hereby certify that the above information is true and correct to the best of my knowledge and belief.
(Lanka Madhu)
Contact this candidate