Site Engineer Cad Designer

RAMCHANDRA MUKUND UTPAT

From:

Mr. R.M.Utpat

Flat No.:- 8,

Pride Co-Operative Housing Society,

Bhoir Colony,

Chinchwad,

PUNE 411 033

CELL:-901*******

To,

Subject:- Application for the post of " CAD Designer" Respected Sir,

Being given to understand that there is a vacancy for the above mentioned post in your esteemed Organization. I would like to apply for the same. My personal particulars are enclosed with this application for your kind attention. In view of the above, if you give me a chance to work under your kind control. I assure you sir, I shall do the duties entrusted on me to the entire satisfaction of my superiors.

Thanking you, in anticipation and eagerly awaiting a favorable reply, I remain. Yours Faithfully,

(R.M.Utpat)

Encl.:- a) Bio Data.

b) Work Experience

BIO - DATA

Name: Mr. Ramchandra Mukund Utpat

*********@*****.**.**

Permanent Address: Flat No:-.8,

Pride Co-operative Housing Society,

Bhoir Colony,

Chinchwad,

PUNE 411 033

CELL:901*******

Educational Qualification:

Board / Institute Examination Year of Passing

MSBTE DME April 2012

Govt. I.T.I Pune N.C.T.V.T. December 1994

Govt. I.T.I. Solapur I.T.I. August 1993

Pune H.S.C. March 1991

Pune S.S.C. March 1988

Computer Knowledge: I have completed basic AutoCAD course from I.C.C. CAD centre Kasarwadi, Pune in 1993.

I have basic knowledge of working on I-DEAS Software in 1. Master Modelling 2. Master Surfacing

3. Master Assembly 4. Drafting Detailing

I can work on Solid Edge Software.

a) Drafting b) Part

I have basic knowledge of PRO-E Software.

a) Sketching b) Part modeling c) Assly.

I can work on CADISON Software.

I can work on M.S. Window's M.S. Office.(Word, Excel) Experience: 1. Presently I am working with Alfa Laval India Ltd. Pune From 16-06-2008 to till date

2. I have worked with Finolex Cables Limited. Pimpri, Pune from 2-11-1999. to 13-6-2008

3. I have worked with Vector Designs Mitramandal Pune From 10-3-1998 to 31-9-1999.

4. I have worked with Enginetech systems Pvt.Ltd.Aundh Pune From 20-2-1996 to 8-3-1998

5. I have worked with Avanti Technologies Kothrud Pune From 16-12-1994 to 19-02-1996

6. I have worked in Greaves Limited P.T.U-1 Chinchwad Pune From 15-10-1993 to 14-10-1994.

Current CTC :

Expected CTC :

11.37 /-lacks / annum

AS per Company Policy

WORK EXPERIENCE:

1)In Alfa Laval India Limited I am working with various drawings. a) Process Flow Diagrams b) P & I Diagram c)Layouts d) Isometric Drawings e) Piping Drawings. f) G.A. Drawings g) Fabrication Drawings h) Erection Sketches For various projects in Veg Oil and Dryers & Evaporators Includes Pressure Vessels and Various types of Tanks. Retention Tank, Hydration Tanks, Storage Tanks, Slurry Mixing Tank, Scrubber Cum Fatty Acid Tank, Stripper Assembly, Wash Oil Tank, Bleach Earth Tank, Oil Water Recovery Tank, Caustic Balance Tank, Hot Water Tank, Soap Stock Tank, Phosphoric Acid Tank Citric Acid Tank, Slop Oil Tank, Vacuum Dryer, Adsorption Tank, Cleaning Table Working on Piping Layouts, IBR Layouts

Using CADISON S/W for P & ID and AutoCAD 20012 S/W. for other drawings 2) In Finolex Cables Limited I have worked on AutoCAD-2000. Worked on Assembly Drawings of Cross Head of various Extrusion Machines for cables. Worked on various detail Drawings of Cable Manufacturing Machines like pay off, cross head, Clamp, water bath, wiper assembly, and take up.

Worked with Machining drawings Fabrication drawings Piping drawings Civil drawings Worked on drawings of water tanks, Pneumatic connections, Electric connections, and other related layout for above said lines.

Also worked on Civil drgs. for new project of optic fibre cable. in urse Talegaon and Goa. Worked on special S.S. pipeline project of Optical Fibre Plant at urse Talegaon for KPGI Project. Which includes piping from cryogenic tank to machine. Piping of S.S. pipe for Gas like O2, H2, N2, and other Hazardous Gasses.

Worked on P & I Diagram for P.V.C. Crusher System Project and Dense Phase System. Worked on drawings of Layouts of plants for cable manufacturing machine and Layouts of utility like water air and coolant pipelines. 3) In Vector designs I have worked on AutoCAD R-14. I have worked on Structural & Fabrication drwings - Assembly, Sub-Assembly & G.A. drawings. for Space Structures like Railway Plateform Roofing systems for Railway Platform. I have worked as 'Site Engineer' for Entrance Canopy and Central Skylight project Vidya Pratishthan Baramati.

I have worked as vendor developer also for casting and rubber parts required for above said projects. I have worked with L & T ECC Chennai on deputation for drawings related work of Railway Platform Roofing system for below three stations. TRIPLICANE Railway Station, CHEPAUK Station & LLOYEDS Station. 4) In Enginetech Systems Pvt. Ltd. I have worked on AutoCAD R-12 Windows base. I have worked on Drawings of various parts of Automobiles Vehicles. Like Tata Safari Tata Sumo etc.

Parts like Rear View Mirror Oil Separator, Air Filters, Thermocouple etc Here I have worked on Drawings of Plastic Part

HERE I HAVE WORKED ON IDEAS SOFTWARE

5) In Avanti Technologies I have worked on AutoCAD R-10 DOS base. Here I have worked on Electrical Circuit Diagrams, Pneumatic Circuit Diagrams, Piping drawigs Assembly, Sub-Assembly and Details of Fabrication Drawings And conveyor related drawings for Special Purpose Machine Here I have worked on drawings for Special Purpose Machine for Industrial Washing Machines. 6) In Greaves Limited P.T.U.-1 I have worked on Drafting Board. Here I have worked on drawings of various types of Gear Box. 1) Assembly, 2) Sub-Assembly, 3) Detail drawings. 4) Fabrication Drawings of Gear Box.

Contact this candidate