Mechanical Engineer

MOHAMMED SALIK

Mobile: +***- ********* E-Mail: *********@*****.***

MECHANICAL ENGINEER

INTRODUCTION

Talented, dedicated, and performance-driven professional with 7 years of Middle East experience i n providing high caliber service in MEP projects in infrastructure, Residential & Commercial towers, Government Project & Software building projects. Good knowledge in all MEP services. Well-experienced in conducting and developing technical studies. Incredibly hardworking with strong track record of completing projects on time and within budget.

MECHANICAL ENGINEERING EXPERIENCE

Plumbing system including cold and hot domestic water supply system, includes central water heating system, waste water, soil waste and storm water drainage system, domestic water tank domestic pump station, drainage lifting stations, irrigation water tank and irrigation pump station, gate valves, non-return valves, pressure relief valve, sanitary wares, Ac drainage, rain water outlet, Fire water GI piping, Cold and fire water HDPE pipe main line, cold & hot water copper piping, floor drain and floor clean out. HVAC system including Chilled water system, split Ac, Cassette AC, Duct able Split, Package unit, Air Handling Unit, Chiller unit, refrigerant copper pipe, GI duct, volume control damper, fire damper, sand trap louver, grills, diffusers, exhaust fan and fresh air fan.

Fire Fighting System including Fire hose reel, fire extinguisher, fire hydrant & sprinkler system CAREER SKETCH

B D &S Middle East Engineering Consultant Mechanical Engineer/Inspector Jan- 2020 to till date Project: Beeah Headquarters’, Sharjah.

Client: Beeah.

Project: Abu Dhabi Municipality Office Type C-Baniyas, Abu Dhabi Client: Municipality, Abu Dhabi

Project: Al Zahia Community-Al Lilac, Sharjah UAE

Client: Majid Al Futtaim.

Designing and creating drawing of all mechanical System.

Evaluating projects to ensure they meet certain specification and requirements.

Addressing and troubleshooting mechanical and planning issues.

Meeting with client to advice on project planning.

Responsible for verification and witness of all mechanical works in accordance with established procedures and ITP's at different stages of the project execution.

Monitor the mechanical works for conformance with the provisions of the Contract Documents and the Procedures manual.

Assist with the final inspection of mechanical work. Monitor final completion of the work.

Coordinate and supervise the work of all mechanical activities.

Responsible for all material submittal as per the project specification and approval.

Inspecting all mechanical equipment for the respected project with relevant documents.

Following and reviewing all the shop drawings as per the contractor submission, and comments against the drawing to follow design and specification.

Inspecting all installation of work at site like HVAC, Plumbing and Drainage with several procedure for testing the work.

The testing procedure should comply with the project specification.

Performing final testing and commissioning with all installation and approval documents, to satisfy the project specification.

Preparing NCN(non- conformance Notice) & CSO (consultant site observation) report if required. ABU HATIM CO LLC, MUSCAT OMAN Site Engineer (MEP) Sep- 2017 to Aug-2019 Projects Executed

Project: Border Post Complex, Al Aswad

Client: Royal Oman Police.

Project: Accommodation Building, Al Aswad

Client: Government of Oman.

Responsibilities

Review Shop drawing, Coordination drawing, Method of statement and material submittal.

Involve and coordinating in Design of Plumbing and HVAC services.

Provide technical support as required to the client’s construction team.

Determines project schedule by studying project plan and specifications, calculating time requirements, Sequencing project elements.

Maintains project schedule by monitoring project progress, coordinating activities, resolving problems.

Making Technical Query (TQs) incase in change of designing parameters.

Maintains safe and clean working environment by enforcing procedures, rules, and regulations.

Responsible for material take off & Procurement with approved material and Supplier.

Raising Material Inspection Request (MIR) to consultant after material Procurement with documents Approved Material submittals, Material check list, MEP specification copy, Manufacture QA/QC certificate, Delivery Note, Manufacture Material Storage and handling, Manufacture installation standards and spare parts list.

Raising Work Inspection Request (WIR) to consultant with inspection request form, inspection checklist Checked and verified by contractor side, approved shop drawing and IFC drawings. Rectifying if any snag works / comments.

Maintains project data base by writing computer programs, entering and backing up data.

Experience of MEP construction works along with testing and commissioning of MEP equipment.

Preparation of Daily and One Month progress report with detail photos.

Attending the Co-ordination meeting with Client & Sub Contractor’s.

Supervision of installation of HVAC, Plumbing & Firefighting items as per standard norms familiar with local, European, American codes & Project Specification.

Target the work schedule with monthly projection. ORIENT FIELD CONTRACTING FOR CONSTRUCTION ELECTRICAL AND MECHANICAL. Saudi Arabia Site Engineer (MEP works) July’14 to March ‘17

Projects Executed

1. Project: King Khalid International University (KKU). Consultant: Zuhair Fayez Partnership Consultant Engineers (ZFP) Saudi Arabia. 2. Project: Security Planning and Development Agency KAP4 Project. Consultant: Proger Engineering and Management Saudi Arabia. Responsibilities

Involvement in the planning, design, management, supervision & execution of the project.

Coordinating design works in coordination with the engineering department.

Mobilization of manpower for execution of the project.

Prepare the detailed Site quantities requirement based on the consultants approved drawings, procurement of material as per approved material and supplier.

Coordinating with the back-office staff and / or supplier towards timely delivery of materials on site.

Responsibility for the direct communication with the client during the project implementation and to the final delivery.

Conducting site meetings with Supervisor, Foremen and labor.

Coordination with all other services like Architectural & Electrical, etc. towards successful completion of project.

Actively participating with third party during Testing and commissioning of Mechanical system.

Keep documentation organized and according to the project management structure, preparing appropriate documents for handing over of the Mechanical services.

Supervision of Duct fabrications as per DW142 / SMACNA standards and its installation.

Monitoring the site activities for all execution of plumbing and HVAC as per the approval and the method of statement.

Entering the fabrication list and Feeding the program in plasma cutting machine.

Cam software for fabrication and making perfect delivery detail and giving the better appearance with sticker.

MAHALAXMI SEAMLESS LIMITED, India Trainee Engineer May-13 to May-14 Responsibilities

Manpower planning for available Machine and Material as per Priority to all work centers.

Listing and planning, follow up for required Tooling’s for Draw Bench, straightening Machine and cutting Machine.

Reutilization of rework material.

Planning to reduce the overall production cost.

Daily, weekly production planning and scheduling of every stage of production center.

Heat Treatment related jobs i.e. Annealing Normalizing, Process annealing and tempering.

Checking visual dimension inspection, as per the customer requirements.

And doing third party supervisor by seeing mechanical test (i.e.) Brinell hardness, Rockwell hardness, yield strength, tensile strength.

ACADEMIC

2013 B.E in Mechanical Engineering from Anna University,

2009 +2 from State Board, Tamil Nadu

2007 SSLC from state Board, Tamil Nadu

COMPUTER SKILLS

Software Tools MS-Office, MS-Project, AUTOCAD, HAP, CAM DUCT Profile : Male, 28, Married Passport Details : J6945832 Date of Birth : 28th DEC 1991 Visa Status : Employment Mechanical Engineer Nationality : Indian Languages Known: English, Hindi, Arabic, Tamil, and Malayalam Current Location : Dubai, UAE Driving license: UAE, OMAN, INDIA COMPETENCY COVERS

- Strategy Planning - Project Management

- Execution, Installation & Commissioning - Manpower & Sub-contract Management

- Material Procurement - Invoice against projection

- Management Reporting

I hereby declare that the above particulars given are true and faith to the best of my knowledge and belief. Mohammed Salik

Contact this candidate