SUMMARY

**+ years working experience in Oil and Gas, GIS Substations, Overhead lines, Ports & Infrastructure, Building Services, Power Plants in U.A.E., Saudi Arabia, Qatar & India.

Technical lead experience in Detailed Design, FEED, Concept Design & Proposal Engineering.

Familiar with local codes – SAUDI ARAMCO, DEWA, ADCO, TRANSCO, SHELL DEP, ADDC, KAHRAMAA, QP, QCHEM, Chevron, SEC

Power/Transmission experience – designed up to 400kV outdoor switchyard & 220kV gas insulated switchgear substations.

Proficiency in electrical design calculations, system study (ETAP / CYME) with extensive experience in load flow, short circuit, motor starting, transient stability, cable ampacity, cable pulling, underground raceways calculations, lightning protection and earthing, cathodic protection, relay co-ordination for substations and power plants, layout engineering, hazardous area classification, vendor engineering, FAT, proposal engineering.

Experience in handling various proposals, preparing man hour estimates, technical proposals, coordinating with various inter disciplines, finalizing the bids with cost estimation and submitting bids.

Proficiency in subsea composite cable / umbilicals engineering with good knowledge in power and fiber-optic cables.

Familiar with international codes - IEC, IEEE, ANSI, BS, API, EN, NEC, NFPA, NEMA

Undertake vital inputs in HSE review, HAZOP, HAZID

Experience in integration & coordinating multi-location engineering, procurement engineering, engineering with sub-vendors and handling site requirements/ client/ consultants.

Strength in preparation/review of design basis, hazardous area classification drawings, substation equipment layouts, cable routing layouts, lighting layouts, lightning protection layouts, earthing layouts design, single line diagram, CT/VT sizing calculations, earthing & lightning protection calculation, preparation of specifications & vendor drawing review for electrical equipments (transformer, motor, cable, switchgear, battery & battery charger sizing, CT/VT, relay & control panel etc), cable sizing, cable schedule, inter connection diagram, block interlock diagram, commissioning, technical bid evaluation for electrical equipment

Key Capabilities:

Finalise technical part - scope of work, responsibility matrix, and other annexure for selection of primary partners. Involved in pre-finalisation activities, clarifications and TBE leading to successful selection.

Lead role in finalisation basic engineering, design basis, SLDs and practices to be adopted for project.

Carry out review of detailed engineering documentation as equipment sizing calculation, cable selection and schedules, equipment/cable tray/lighting/lightning protection, grounding and area classification layouts, procurement specifications, pre-order and post order vendor review, MTO for cable/cable tray/bulk materials., etc.

Procurement Engineering – Involved in material requisition, package preparation including scope of work, vendor technical bid evaluation, clarification handling up to final TBE for electrical equipments.

Ensure parity & plant standards between all, interface management.

Ensure completeness of engineering. Respond to end user comments/ queries and to site requirements.

Supervising, leading and offering technical support to a group of engineers. Responsible for coaching and developing junior professionals.

EXPERIENCE

Mar 2020- Current

Senior Principal Electrical Engineer, Saipem, Sharjah, U.A.E.

NFPS EPCOL Detailed Engineering - Qatar Gas, Qatar.

The project scope of work includes Engineering, Procurement, Fabrication, Construction, Installation, Hook-up and System Completion for the following facilities. Additionally, provide startup assistance for the facilities if requested in accordance to project requirement.

oFour (4) Wellhead Platform (WHP) Topsides (Jackets by others);

oSix (6) Riser Platforms (RP), including Topsides and Jackets.

oSix (6) Bridges (BR) connection RPs to existing WHPs.

oSix (6) Corrosion Resistant Alloy (CRA)-Clad Carbon Steel (CS) Intra-field Pipelines.

oOne (1) pipeline Decommissioning.

oFour (4) Subsea Composite (Power and Fiber Optic (FO)) Cables.

oSignificant Offshore brownfield modifications and upgrade at existing Offshore facilities.

Activities involved

oProcurement Engineering –Including scope of work, vendor technical bid evaluation, clarification handling up to final TBE for PMS/PDCS system, Medium Voltage Switchgear, distribution transformer, Emergency, Essential Diesel Generator package, L.V switchgear panels, UPS & distribution boards, Navigational Aids.

oHandling various electrical interface for mechanical packages like Gas Turbine Generator, instrument and air compressor package, Deluge skid, Electric heaters, Electro chlorination package, Flare package etc.,

oProvide Inputs to other disciplines.

oInterface with mechanical, instrumentation and project management.

oEnsure parity between all plant standards, interface management.

oEnsure completeness of Proposal engineering. Respond to Bidder queries.

oSupervising, leading and offering technical support to a group of engineers.

HI FEED Development Proposal - SPDC LIMITED / Sunlink JV, Nigeria.

oProcurement Engineering – preparation of material requisition, package preparation including scope of work, vendor technical bid evaluation, clarification handling up to final TBE for Medium Voltage Switchgear, distribution transformer, Emergency, Essential Diesel Generator package, L.V switchgear panels, UPS & distribution boards, Navigational Aids.

oHandling various electrical interface for mechanical packages like 11kV Gas Turbine Generator, Depletion compressor package, instrument and air compressor package, Deluge skid, Electric heaters, Electro chlorination package, Flare package, 11kV Sea water pumps package, Fire water pump package etc.,

oInterface with mechanical, instrumentation and project management.

oEnsure parity between all plant standards, interface management.

oEnsure completeness of Proposal engineering. Respond to Bidder queries.

oSupervising, leading and offering technical support to a group of engineers.

Lightning Proposal – ADNOC

oMTO: Main equipment MTO, Electrical Cables, Lighting MTO and Miscellaneous bulk material (viz., earthing materials, cable trays, cable glands & lugs) MTO, etc.,

oReview of HVDC equipment package

oReview of Balance of plant electrical items (MV&LV Switchgear, AC&DC UPS etc.,)

oReview of 400kV Cable Sizing calculations

oReview of 400 HVDC Cable Sizing calculations

oProvide Inputs to other disciplines.

oInterface with mechanical, instrumentation and project management.

oEnsure parity between all plant standards, interface management.

oEnsure completeness of Proposal engineering. Respond to Bidder queries.

oSupervising, leading and offering technical support to a group of engineers.

LTA #61 Bid Proposal – Saudi Aramco

oMTO: Main equipment MTO, Electrical Cables, Lighting MTO and Miscellaneous bulk material (viz., earthing materials, cable trays, cable glands & lugs) MTO, etc.,

oPreparation of Scope of Work Presentations,

oProvide Inputs to other disciplines

oInterface with mechanical, instrumentation and project management.

Apr 2014- Mar 2020

Senior Electrical Engineer, WorleyParsons, U.A.E.

Abu Ali Pier Upgrade – Sea Water Intake and RO system.

Abu Ali Pier Upgrade project scope for Pre-FEED and FEED design includes

Seawater intake pump station with screens and chlorination for feeding to Desalination plant and firewater network.

Piping from intake pump station to Desalination plant/ Fire water network

Desalination plant (Reverse Osmosis) as a package unit;

The electrical design comprises of providing power supply and distribution to above equipments/motors/loads.

Performing Lead engineer role and preparing electrical design basis, electrical load list, single line diagrams for sea water intake pump station and RO plant.

Lower Zakum Long Term Development Plan Phase-1, Concept & Select design.

Lower Zakum Field is in the central part of the Arabian Gulf at about 65 km NW of Abu Dhabi town and 100 km to the East-South-East of Das Island. The field was discovered in July 1963 and the crude oil production started in November 1967. Zakum field consists of approximately 118 Wellhead Towers hosting oil producers, gas injectors and water injectors.

Project responsibilities in detail:

oElectrical load estimation for various options for the two new artificial islands & well head towers.

oPower plant study with combined cycle and simple cycle options.

oEstimate demand for future phases and identify various gas turbine generator options.

oDesigned and develop concept single line diagrams for 132kV and MV & LV single line diagrams for various options.

oDevelop Sparing Philosophy.

oDevelop Generator Operating philosophy.

oPower System Design Philosophy including Load flow, Short circuit, motor starting and VAR compensation using ETAP 18.0.

oPhased load addition during the life of the project.

oOptimize the design using Capital Expenditure (CAPEX) and Operating Expenditure (OPEX).

oPlot plan inputs for power plant and substation areas.

o132kV and 33kV Subsea cable sizing calculation.

Deep Tunnel Storm Water Drainage – Dubai Municipality.

Electrical load estimation for the plant and preparing load list.

oInterface with Stantec and DEWA for NOC approvals

oDesigned and developed 11/0.4kV and LV single line diagrams.

oDesigned and developed 11/0.4kV and LV protection, metering and control schematics.

oShort circuit studies, load flow calculations using ETAP 18.0.0.

oDesign lighting calculation using DIALUX outdoor lighting calculations for the plant.

oDesign and developed electrical equipment layouts for the 11/0.4kV substations.

oElectrical design for Terminal Pumping station

oDesign calculations of MV & LV cable sizing.

oDesigned and developed reports like Electrical Design Basis, power system design report etc.,

oDesigned and developed specifications like electrical equipment specifications for 11/3.3kV switchgear, LV switchgears, transformers, UPS, LV DB’s, cables, Lighting specifications, earthing etc.,

oDesigned and developed cable tray/ducting, lighting & earthing layouts.

oDeveloped cable schedules.

oUtility corridor design inputs and clash checking with wet utility, piping, instrumentation and other services.

Haliba Field Development – PMC consultancy for Al Dhafra Petroleum.

The Haliba Development plant consists of Full Field Development and full well stream transfer to ADCO ASAB facilities for further processing through an export pipeline of ~65km. The sustainable production from this field is envisaged to be 20000 ~ 40000 STBOPD.

The facilities in this greenfield project is fully automated / unmanned, which includes Production wells, Water source wells, Water injection system, Water disposal wells, Multiport Selector Manifold, Export Pipeline (with permanent pigging facilities) from Haliba Central Gathering Facilities to ADCO ASAB CDS including all tie-ins, 132kV Overhead Line (OHL). The utility systems and associated infrastructure will be developed to support Haliba facilities.

Project responsibilities in detail:

oPreparation on EPC Contractor electrical scope of work.

oProvide technical responses to tender clarifications.

oReview Contractor deliverables for 132kV Over Headline.

oFinalize OHL routing layouts

oReview 132kV & 33kV GIS specification, data sheets.

oReview SCMS, OLCMS, FMS specification and data sheets

oReview 132kV and 33kV OHL conductor sizing calculations.

oReview 132/33kV, 33/11kV Substation layouts.

oReview 132kV GIS, 33kV GIS, 11kV, 3.3kV, 415V Single line diagrams and Protection & metering diagrams.

oReview power system studies for load flow, motor starting, short circuit, harmonic analysis, transient stability study, underground ampacity calculations etc.,

oReview of MR’s, TBE’s for all electrical and mechanical packages.

King Abdullah Port (KAP) Project– EPC Engineering consultancy for HUTA Marine.

Project responsibilities in detail:

oComplete detailed engineering documentation including equipment sizing calculation, cable selection and schedules, equipment/cable tray/lighting, grounding and MTO for cable/cable tray/bulk materials, etc.

Projects

Grace Chemicals Project– EPC Engineering consultancy for Grace Chemicals.

Produced Water Reinjection Project – FEED for British Petroleum.

Das Harbour Island project – FEED for ADMA

CICPA – Owners Consultants.

Proposals Handled

McDermott Power Upgrade Project

Abu Dhabi Ports - Green Ports Technical Study

Angola Tower Infrastructure Development Project

Deep Tunnel Storm Water Drainage Project

King Salman Port

Anaklia Port

Fujairah Port

Jebel Ali CT4

ADMA Rehabilitation & Upgradation

Das Road Rehab-Upgrade Project

Jul 2010 - Mar 2014

Lead Electrical Engineer – Mcdermott, Dubai, U.A.E.

Projects

Engineering Consultancy Services Dubai Petroleum (DP) with scope of FEED for 2no. Green field platforms, ESP phase 2 conceptual study and detail design for Brownfield platforms.

Khafji Ratawi Water Injection Facilities Project – Saudi ARAMCO with scope of 4 Green field platforms and 3 Brownfield platforms and Onshore.

Proposals Handled

Zakum West 100 MBD Project – ADMA

SATAH Full field development project– Zakum Development Company.

Morjan Gosp-2 & Gosp-3

Sept. 2007 – Jul. 2010

Electrical Engineer – Electrical Designs, WorleyParsons Ltd., Qatar (PMC)

Projects

New Doha Port Project– MMAA, State of Qatar.

Feed for Power Supply Projects to Halul Island and NFA Platform– Qatar Petroleum. (Onshore, Subsea & Offshore)

New Doha International Airport– CAT.

Lusail Development Primary Infrastructure Construction Package 1 (CP1) 66/11kV Underground Substations – Siemens / Kahramaa, State of Qatar.

FEED for Integrated Oily Water / Sludge Handling System, Fire Protection for Crude Oil Manifold & Pipeline Replacement at HALUL – Qatar Petroleum.

Front End Engineering Design (FEED) for NGL Campus at Mesaieed– Qatar Petroleum.

Privatization of Cleaning Services & Waste Treatment facilities DOHA – State of Qatar – Domestic Solid Waste Management Centre – MMAA, State of Qatar.

EPIC for the replacement of obsolete switchboards at PWI Stations-1,4,5,6,7,8,9,FN & FS Degassing stations at Dukhan Fields-Qatar Petroleum.

Front-End Engineering Design (FEED) for RSE NETWORK IN RAS LAFFAN - Qatar Petroleum.

Consultancy services for ETA Star, State of Qatar.

Dec. 2006 – Sep. 2008

Electrical Engineer – Fichtner Consulting Engineers - Chennai, India (Owner Consultant/Detail Engg.)

Projects

3x660MW Super Critical TPP at Tirora, Maharastra (Owner Consultants) – M/s Adani Power Ltd. Maharastra.

4x330MW TPP at MUNDRA, Gujarat (Owner Consultants) – M/s Adani Power Ltd. Gujarat.

Niger Delta Power Plant at Nigeria – M/s Jurong Engineering Ltd. Singapore.

Apr. 2005 – Dec. 2006

Electrical Engineer – Electrical Designs, Elsytec Power Projects- Chennai, India (Consultant)

Projects

1x330 MW Combined Cycle Power Plant at Dholpur, Rajasthan – M/s GEA Energy Sys. Ltd..

400/220 kV Subhasgram Substation (for PGCIL) – M/s Crompton Greaves Ltd.,

400 kV Bina Substation (for PGCIL) – M/s Crompton Greaves Ltd.,

Apr. 2003 – Mar. 2005

National Institute of Technology, Calicut

Projects

Transient stability analysis for effects of various excitation systems for IEEE 30 bus system.

Remote control for Electrical appliances.

EDUCATION

Master of Technology in Power Systems, National Institute of Technology, India. – 2005

Bachelor of Technology Electrical & Electronics Engineering R&N Engineering College, JNTU University, India. – 2003

SPECIFIC TECHNICAL EXPERTISE/SPECIALIST COURSES

Professional Membership

Society of Engineers, UAE

Computer Skills

Proficiency with Windows Office packages, ETAP, CYME, DIALUX, BATTSIZE, and AutoCAD.

Accustomed to Plant Modeling environment and review software like PDMS, Navisworks

Key Attributes

Ability to analyze complex engineering problems, evaluate and recommend alternatives and communicate recommendations effectively

Capable of establishing excellent healthy relationship with all levels of management and work hard at being an integral part of organization.

Capable of demonstrating the high standard of outputs against the tough deadlines.

Training

Hands on training on ETAP 19.0.1

Training on effective communication skills

Training on Leading effective business and management

Contact this candidate