Quality Engineer Manager
Resume:
Wayne W. Sinks
Buckeye, AZ *5326
cell 951-***-****
Home 951-***-****
Email *******@*****.***
SUMMARY
More than 35 years of Quality Control/Assurance experience Experienced conducting contract reviews to assure quality requirements were flowed down to suppliers/vendors.
Successfully implemented statistical process control (SPC) of Machine, Chemical and Heat treating processes.
Chairman of Material Review Board (MRB) for all programs, commercial and military. Supervised Calibration lab and responsible for the calibration of hand held measuring devices such as dial bore gages, calipers, torque wrenches, etc. Taught cause and corrective classes to Manufacturing Managers and supervisors. Completed GD&T and soldering classes and taught surface plate set-ups. Reduced test backlog of Pre-Preg. material from 120 days to an average of 21 days. Supervised FAA Repair Station responsible for Class ll oxygen systems and the overhaul and of air speed switches etc.
Revised The Overhaul and Repair Manuals to incorporate FAA FAR 145 changes. Issued 8130-3 Airworthiness tags as required.
Conducted FAA conformity inspection of new parts and details in conjunction with the Long Beach Calif. MIDO office.
FAA DMIR-606215-NM FAA Repairman Cert. No. 2460027 EXPERIENCE:
Quality Planner Amsafe Inc. 1041 47th Ave, Phoenix, AZ March 23, 2015 to February 3, 2020
Duties: Performed Internal audits as per ISO9001 & AS9001 requirements. Responsible for 1st Article AS9201 Reports using Inspection-Xpert and Discus software. All reports were then available for customers review/acceptance via the Boeing Net Inspection files. Reviewed Engineering Change Orders (ECO's) and updated the 1st Articles per AS9102
QC Inspector Fry Reglet, 405 75th Ave, Phoenix, AZ Temp Assignment Aug 2014 – March 16, 2015
Duties: Receiving inspection, in-process inspection, 1st Art. inspection QC Inspector Network Staffing Phoenix, AZ
Temp Assignment April 2014 – Aug 2014
Duties: General inspection of Sheet metal parts and assemblies. QC Inspector Phoenix Metal Craft Phoenix, AZ
Full time Sept 2013 - Feb. 2014
Duties: 1st Article Inspection, Final inspection of Sheet metal details. QC Inspector Pro Precision Phoenix, AZ
Temp. Assignment 90 Days 4/12 – 7/12
Duties: Inspection machined parts and details. 1st article inspections as required. Receiving inspector Adecco Employment Agency Mesa, AZ Temp Assignment 90 Days 11/11 – 2/12
Duties: Inspection of aircraft engine parts and details. 1st article inspections as required. 9/2009 – 10/2011
Sales Associate Circle K Williams, Arizona
Duties: Sales, inventory, control of shelf life items and Stock inventor 2/2007- 9/2010 Retired
7/2006 – 1/2007 7/2007 to 12/2007 Temp. Assignment Senior Inspector Sargent Fletcher EL Monte Ca. 91731 Duties: Responsible for inspection and testing of Small Diameter bomb racks, fuel tanks, paint inspection of parts and assemblies. Other duties included receiving inspection, first article and final inspection aircraft machined parts and assemblies.
2/2006 – 7/2006
Q.C. Manager – Atlas Specialty Products Anaheim, Ca Temp. Assignment
Duties: Responsible for all work assignments of QC personnel. Created a computer program to track rework hours.
Updated internal audits, interfaced with suppliers and customers. Conducted Opportunity Training to improve quality awareness. Improved tapping processes for high strength nuts and bolts. Revised Quality Procedures and updated quality files. 5/2005 – 2/2006 3rd Shift
Senior Inspector Shurflow Anaheim, Ca
Duties: Daily activities and assignments were as follows: Performed 1st Articles, witness functional test of pumps Receiving and shipping inspection details and assemblies. 6/1998 – 9/23/04
Quality Manager Pacific Precision Products Irvine,Ca Duties Revised Overhaul and Repair Manual to incorporate FAR 145 changes. Contract review of purchase orders, and engineering drawing requirements. Created Electronic files for tracking customer returns and status of work in-progress.
Up dated inspection procedures and Manufacturing Planning. Performed conformity inspections as a FAA DMIR of Class ll oxygen drop out boxes for corporate business jets
FAA DMIR-606215-NM FAA Repairman Cert. No. 2460027 8/1996- 6/1998
Quality Control Inspector Fata Hunter, Inc. Riverside, CA Duties: Wrote a supplier quality control procedure for processing supplier/vendor quality issues. The procedure addressed the process of handling rework, repair, scrap and use-as-is Dispositions of rejected parts/materials. This procedure was written to comply with ISO 9001 requirements.
Reviewed customer corrective action requests and updated critical component check lists.
Performed functional testing of completed assemblies such as coil cars and high speed mandrels
SPC Specialist ALCOA Composites Structures Monrovia, CA 1995-96
Duties: Reduced test backlog of raw material from 120 days to an average of 21 days and inspection backlog from 6 weeks to an average of 7 days. Supervised inspection activities including in-process and final inspection of aircraft machined parts.
Inspected military hardware and components for helicopters. Implemented and conducted statistical process control training and conducted classes for facilitator trainees.
QC Manager/Senior Quality Engineer Weber Aircraft, Inc. Fullerton, CA 1989-95 Duties: Successfully implemented statistical process control (SPC) of all machining, chemical and heat treating processes, to meet
D19000 requirements of Boeing Airplane Company.
Chairman of material review board for all programs, commercial and military. Responsible for the Lab personnel and calibration of precision measuring devices such as dial bore gages, calipers, micrometers, torque gages, flow meters. Wrote inspection procedures for contract review of quality requirements. Completed GD&T and soldering classes while assigned as a Quality Engineer supervisor.
Assembled and presented the Conformity Package for the C-17 16G Pilot and Co-Pilot seats.
Conducted inspection of B1B ejection seats both in process and final inspection. Seats we loaded with ejection ordinance.
Precision Inspector-Lead Parker Hannifin Irvine, CA 1981-89
Became proficient in casting layout and dimensional inspection of aircraft machines parts.
Responsible for training new personnel in class 100 clean room inspection procedures and test verification requirements. Performed in-process inspection of assembly and testing of space shuttle fueling valves.
Responsible for daily activities of assembly, tooling and 1st article inspectors. Reviewed rejection reports for submission to material review board. Supervisor Rohr Aircraft, Riverside, Ca
1977-1979
Duties: Responsible Honeycomb core cutting the machining of Engine and F-14 Tom Cat Honeycomb core side walls as well as the fabrication of C130 Cargo Doors and hardware.
Skill Set
I am capable of using and creating Excell spread sheets., power point and Microsoft as needed. I am able to calibrate micrometers, calipers and dial bore gages and torque gages if required. I have used comparators, microscopes, bench mikes, dial bore and scopes as well as surface comparators, CMM's for simple inspections checking roundness, flatness and etc. I read and understand blue prints dim. according to ANSI 14.5 as well as engineering change orders, Purchase Orders and Airworthiness (8130-3) Tags.
SAP Training is limited to Blue print configuration and configuration changes. The SAP ECC 6.0 is the latest software that allows the review of vendors orders, shipments, corrective action verification, engineering design changes, contract orders and scheduling of shipments. I have performed mechanical and (Zyglo) inspection of jet aircraft bomb racks, inlet ducs, fans machined and raw castings.
I am capable performing layout inspections when required. While employed by Parker Aircraft/Space division and was directly involved with the inspection and testing of Space Shuttle fueling Valves.
EDUCATION: Graduated - Riverside City College - Riverside, CA AA Degree Graduated - California Military Academy - Commissioned 2nd Lt.
Contact this candidate