MEP QA/QC Engineer
Resume:
BERNICETO ARENAS IMUAN
Sr.QA/QC Electrical Engineer
New Salata,Doha Qatar +974******** adqdaq@r.postjobfree.com Aspiring, motivated and hardworking Electrical Engineer with over twenty-three (24) years of diversified and progressive field of work exposure in the Construction Industry. Main field of specialization has been involved in Quality inspection, Construction supervision, installation, Pre commissioning on the large MEP construction projects such as stadium, high rise buildings, roads and highways, Airport, primary substation, power plants and Petro chemical plant particularly in Qatar and Kingdom of Saudi Arabia. ANEL MEP Maintenance and Operation Group
Sr. MEP QA/QC Engineer
January 2021 – March 2022
Projects:
HIAEP-00016 Renovation of North Node Lounges, Activity Node and Hotels Job Description:
Prepare Method statement and ITP
Monitor the progress and effectiveness of the quality management system and implement improvement when required
Coordinate with the main Contractor’s QA/QC and Construction personnel team to resolve any site issue/Deficiency
Conduct quality training at site.
Coordinate all QA/QC activities with the construction site manager and QA/QC Manager
Monitor disposition of all issued nonconformance reports and make corrective action plan. PSC Trading & Contracting W.L.L (Doha, Qatar)
QA/QC Electrical Engineer
November 2017 – May 2020
Projects:
Renovation/refurbishment of Four-Season Hotel (West Bay Doha, Qatar) May 2019 – March 2020
Al Bayt Stadium with 60,000 sitting capacities under Supreme Committee (Al-Khor City) November 2017 – May 2019
Job Description:
To check and to ensure that all completed MEP works at site are in accordance to specified method statement (MS), inspection test plan (ITP) and project specification.
Review supplier’s material submittal and ensure it is compliance to project specification and to any relevant local and international standard.
Prepare method statement and inspection Test Plan (ITP) EMPLOYMENT HISTORY
PROFILE
B.A.IMUAN Page 2 of 5
Coordinate all the quality site inspections through the site QC inspectors.
Ensure all quality control documentation is compiled and competed for as built hand over through the QA/QC turn over Engineer.
To check the material delivered at site and ensure it is compliance to approved material.
Review supplier’s material submittal and ensure it is compliance to project specification and standard.
Assist the QA/QC Manager and Construction Manager regarding the closing out of NCR/NCN and SDR and obtained preventive and corrective action plan.
Attend weekly meetings with the QA/QC Manager concerning Quality Issue. Advance Vision/QD - SBG (Doha, Qatar)
Sr. MEP QA/QC Engineer
January 2012 – November 2017
Project:
QPR - Dukhan Road (East Contract) under ASHGAL Project January 2012 – November 2017
Job Description:
Carry out inspection and checking for all quality related procedures in the site and ensures activity at the site is executed as per approved project specification (MS), inspection test plan (ITP) and standards.
Perform daily inspection with consultant or client representative as per given request for inspection and check the completed work activities at site and ensure according to approved shop drawing, method statement and quality procedure.
Develop method statement for the activity including risk assessment and job safety environmental analysis and Inspection Test Plan and checklist based on specifications of the project.
Attend/witness inspection between sub-contractors prior to acceptance of submitted Inspection Request.
Responsible for the quality and workmanship of every activity, thorough knowledge of all phases of engineering construction relating to civil, architectural, and structural discipline interfacing the multidisciplinary operations.
Monitoring the quality inspectors work and monitoring over all inspection on all site activities, materials etc.
Coordinate with the consultant’s representative and site in-charge for inspection and meeting about quality problems including the closure of Non-Compliance Report.
Taking care of QA/QC documents of the entire project including certificates, calibration, test results, inspection requests, non-compliance reports and site instruction/observations, permanent materials delivered and other QA/QC documents.
Check all materials delivered at site and ensure its compliance with material approval and specification.
Energo Projekt Entel Int’l Consulting Engineers (Doha, Qatar) Site Electrical Inspector
July 2007 – October 2011
Project:
66/132/220/400KV Qatar Power Transmission & Distribution Sys. expansion for Phase VI, VII, VIII, & IX under KAHRAMAA (Qatar General Electricity) B.A.IMUAN Page 3 of 5
Job Description:
Review project documentation for design drawings, material submittal, method statement and site acceptance test procedure.
To witness daily inspection with the contractor either on erection, installation, testing and commissioning of HV/EHV GIS switchgear, 11KV switchgear, power and auxiliary transformer, neutral earthing resistor, LV AC/DC distribution board, battery charger, UPS, protection relay panel, local control center, AVR/RTCC panel, SCS panel and earthing system.
Coordinates with contractor’s work schedule, work accomplishments and scope of work and other concerned department personnel during execution and recommend proper solution within the standards.
Ensure all activities performed at site are in accordance with approved drawing, method statement, SAT procedure, and client’s standard & specification and to relevant international standards and codes.
Direct site supervision and monitoring of contractor’s daily works activities on installation and testing of 400/220/132/66KV GIS substation.
Monitor and inspect site works being undertaken by the contractors/subcontractor and monitor overall progress.
Assist the Senior Electrical Engineer with full coordination to the construction engineer to provide assistance in the supervision of the works undertaken by the contractor.
Prepare defects lists for inspection works and issue non-compliance reports for non-compliant works.
Signing test report and erection control form after witnessing the inspection and give some comments (if any) for further rectification.
Oversee and inspect all electrical & instrumentation work and ensure that installation activities comply with contractual obligations and quality control standards.
Receive material inspection requests (MIR) from contractor, inspect electrical & instrumentation materials delivered at site and report on quantity and technical compliance and sign off requests. Al Issa/Kuljian Int’l Consulting Engineers (Riyadh, K.S.A) Site Electrical Inspector
March 2005 – April 2007
Project:
(4X600MW Steam Turbine Generator) Oil Fired Power Plant for Stage II Phase 2 under project of Saudi Electricity Company (SEC-WR)
Jeddah, Kingdom of Saudi Arabia
Job Description:
Review, plans and monitor the actual execution of all electrical related works of the projects.
Review shop drawing and any documents transmittal submitted by main contractor.
To witness daily inspection with the contractor on erection, installation, testing and commissioning of power transformer, MV/HV, HV&EHV cables, switchgear, motor control center, isolated phase bus duct, gas insulated bus duct, cable trays, lighting and earthing system.
Close monitoring and direct supervision of main contractor’s daily work activities at site to ensure the activities are strictly performed in accordance to approved drawings, method statements, Inspection Test Plan (ITP), project specification and to relevant international standards.
To witness material inspection with the contractor to ensure that the material is confirming to project specification, local and international standard.
Attend site technical coordination meetings to discuss contractor’s submissions, shop drawings, material submittals and to any related construction matters. B.A.IMUAN Page 4 of 5
Coordinates with contractor’s work schedule, work accomplishments and scope of work and other concerned department personnel during execution and recommend proper solution within the standards and specifications.
Participate in walk downs/thru of completed electrical systems for punch-out and approval of
“Red Lined” as built drawings of installation.
Generate nonconformance report (NCR) to any noncompliance work.
Participate and actively follow up electrical construction and commissioning. Hadi Haider Company (Rastanurah, K.S.A)
QC Electrical Inspector
February 1999 – November 2004
Projects:
4X600MW Steam Turbine Generator Oil Fired Power Plant for Phase II Under the project of Saudi Electricity Company (SEC)
Petro Kemya Polyethylene Project under Saudi Basic Industries Company (SABIC) Jubail, Kingdom of Saudi Arabia
Job Description:
Conduct daily routine inspection and ensure all ongoing works at site are executed as per approved drawing, method statements, ITP, and Project specification.
Conduct material inspection at warehouse with client’s representative to ensure that material is as per client standard and confirming to Material submittal approval.
Carry out daily inspection with the consultant or client representative as per specified on Inspection Test Plan (ITP) and obtain signature of the witnessing parties after the inspection.
To witness testing and commissioning with the consultant for all electrical equipment.
Prepare Request for Inspection (RFI) prior for the approval and acceptance of the consultant.
Prepare non-conformance reports to the QA/QC manager and assist in developing corrective actions.
Ensures the quality records, acceptance certificates, electrical completion certificates and the documentation for specific systems are prepared before turning over to commissioning team.
Assist the QA/QC Engineer on developing and implementing quality control procedure.
Conduct testing of all power and control cables (IR and Megger test). Beta Electric Corporation (Taguig Metro Manila, Philippines) Electrician/Site Engineer
March 1996 – November 1998
Project:
42 Story’s Twin Tower Building
Boni Avenue, Mandaluyong City
Job Description:
Electrical installation of conduit pipe for feeder, lighting, power, and communication system.
Installation of panel board and main distribution board for lighting and power system.
Make as built drawing if there are any changes or modification during installation at the construction site.
Ensuring all activities performed at site is accordance to project specification, codes and standard.
B.A.IMUAN Page 5 of 5
Close coordination with the contractor’s representative (civil engineer, general foreman) concerning scheduling of concrete pouring.
Prepares and submits necessary reports and document to the project in charge.
Conduct regular inspection for quality control and assurance program.
Assigns and inspects the work of electricians and trades helpers; initiates corrective actions to secure satisfactory standards and timely project completion.
Plans and develops work schedules, equipment usage schedules, and procedures for equipment maintenance.
Determines material and labor estimates.
Assists in performance evaluation process.
Participates in maintenance, repair, and installation duties in the trades.
Perform cable termination, testing and loop checking. EDUCATIONAL ATTAINMENT
Bachelor of Science in Electrical Engineering (BSEE) (1988-1994) Luzon University
(Dagupan City, Pangasinan, Philippines)
IOSH Managing Safely (Conducted by SHEILD LTD.)
QD- SBG Site Office Doha, Qatar
July 9 - July 17, 2012
Building Wiring (Conducted by Philippine College of Science and Technology) Calasiao, Pangasinan.
January 5 - February 5, 1993
END
SEMINAR & TRAINING ATTENDED
Contact this candidate