Electrical Engineer, ELV Engineer, Low Current Engineer, QC Inspector

MUHAMMAD SHAHID Electrical / Instrumentation Engineer

Available for relocation / Transferable Iqama

+966-**-******* *************@*****.*** Riyadh, Saudi Arabia PROFILE

Electrical Engineer having twelve (12) years of professional experience with regards to engineering practices involving the review and verification of IFC drawings and shop drawings other than scheduling, supervision and monitoring in various construction and building projects in accordance with specification and standard requirements. On field proven experience for installation, inspection, implementation and pre-commissioning/testing of MV (Cable, RMU, and Distribution Transformer), LV (Lighting, Small Power, Distribution, Switchgear, Auto Transfer Switch, and Motor Control Centre), ELV (Nurse Call, CCTV, Access Control, Public Address, TV, Data/Telephone, Clock system) & Instruments (for Fire Detection & Building Management System). Possessed adequate experience in implementing and executing task required in promoting services that will associate in obtaining common company objectives of providing quality in all aspects of work. Team player with high integrity, self- driven and technically competent with excellent communication skills. EDUCATION & CERTIFICATION

Bachelor of Science (BSc.) in Electrical Engineering Mirpur University of Sciences and Technology (MUST), UAJK Pakistan (2003-2007) One Month Project Planning (Primavera)

Directorate of Worker’s Education Islamabad, Govt. of Pakistan (May-2012) PROFESSIONAL MEMBERSHIP

Saudi Council of Engineers Membership No. : 135051 Pakistan Engineering council Membership No. : 25220 KEY PROJECTS

MOI, KAP-1 Forensic Lab 192 Hail, SA

MOH, Al Qunfudah General Hospital, SA

ARAMCO, KAPSARC Riyadh, SA

ARAMCO, KASC Jeddah, SA

Pakistan Navy Dockyard Karachi, ICE Test Bed Facility, PK

Sheikh Zayed International Academy Islamabad, PK PROFESSIONAL EXPERIENCE

Period : September 2021 – February 2022

Employer : The Solutions & Fabricators Pakistan

Job Title : Electrical/Instrumentation Engineer

Period : April 2013 – September 2020

Employer : Saudi Technical Group Saudi Arabia

Job Title : Electrical/Instrumentation Engineer

Period : July 2010 – February 2013

Employer : Skyways Construction Co. Pvt. Pakistan

Job Title : Site Electrical Engineer

Period : January 2009 – July 2009

Employer : Innovative Biscuit Factory Lahore Pakistan Job Title : Maintenance Electrical Engineer

PROJECTS HISTORY

Pakistan Navy Dockyard Karachi, ICE Test Bed Facility PK–The Solutions & Fabricators Electrical/Instrumentation Engineer (September 2021 – February 2022) Duties & Responsibilities

Planning, organizing and checking of work flow and project schedules to meet the deadlines.

Design review and coordination with the design department for the amendments in the drawings and to ensure the timely release of design information.

Collaborates with design group to change plans if problems arise.

Requisition of material orders to procurement department.

Supervise and monitor installation of cable tray, cable pulling for building management system (BMS), fire and gas detection systems.

Preparing the I/O list of BMS for final configuration by Testing/Commissioning team.

Supervise and monitor installation of panels and instruments (for BMS and Fire/Gas Detection System) like DDC panels, temperature/humidity sensor, pressure sensor, flow sensor, modulating/non-modulating valve actuator, FACP, smoke detector, flame detector, modules, CO2 gas detector, HC gas detector, hydrogen gas detector etc. as per approved drawings and assist the testing/commissioning team.

Coordinate with client representatives for inspection of work and queries. MOI-KAP-1, Forensic Lab 192 Hail SA–Saudi Technical Group Electrical/Instrumentation (December 2019 – September 2020) Duties & Responsibilities

Conduct and inspect all the installation to be done with approved materials.

Design review and coordination with the design department for the amendments in the drawings.

Monitor and instruct for proper installation of conduits, cable tray, wires, cables (LC,LV,MV) and termination.

Monitor and instruct for proper installation of lightning protection and grounding system.

Pre-commissioning test for cables: like Continuity, Insulation Resistance.

Supervise and monitor the installation and pre-commissioning/testing of Lighting, Small power, MDB, LV distribution, Automatic transfer switch, Building management system, Fire alarm, Access control, CCTV, TV, Public address, Data and Telephone system.

Monitor and instruct for proper terminations of electromechanical equipment on both ends.

Supervise and monitor the installation of panels and instruments (for FAS and BMS) like FACP, FARP, smoke detector, heat detector, IO module, DDC panels, thermostat, temperature/humidity sensor, pressure sensor, modulating/non-modulating actuators for valves/dampers etc.

Daily site surveillance to note discrepancies and inform related one for their rectification.

Monitor & conduct the inspections of pipe sleeves block outs for future installations in walls, slabs, partitions.

Performed coordination with civil services and MEP.

Conduct inspections of all incoming shipments of electrical equipment, instruments and other electrical material to observe any discrepancy in material as well as for abuse in shipping.

Inspection of material received as per approved ITP’s, submittals, BOQ and project specifications.

Responsible for electrical material take-off for variation orders and raising orders to procurement department

Prepare quantities break down for all electrical items at BOQ and in approved drawings.

Preparing and submitting RFI and MIR for work and material inspections accordingly.

Taking care of all technical submittals for the equipment, materials, shop drawings. MOH-Al Qunfudah General Hospital SA–Saudi Technical Group Electrical/Instrumentation Engineer (November 2014 – December 2019) Duties & Responsibilities

Review construction drawings and study applicable specifications/standards prior to execution at site.

Review and submit the shop drawing and material documents to consultant/client for approval.

Review project proposals and plans to develop project objectives and identify project phases and elements.

Maintain safe and clean working environment by enforcing procedures, rules, and regulations.

Collaborate with project staff to create a strategic action plan and estimates of materials, time, labor, and other resources required to complete the project.

Monitor and instruct for proper installation of conduits, cable tray, wires, cables (LC,LV,MV) and termination.

Monitor and instruct for proper installation of lightning protection and grounding system.

Pre-commissioning test for LV cables; like Continuity, Insulation Resistance, Earth Resistance etc.

Supervise and monitor the installation and pre-commissioning/testing of Lighting, Small power, MDB, LV distribution, Automatic transfer switch, Motor control center, UPS, Building management system, Fire alarm, CCTV, TV, Public address, Nurse call, Data, Telephone and Clock system.

Monitor and instruct for proper terminations of HVAC (AHU, CHILLER, FCU, EF) motors on both the ends.

Supervise and monitor the installation of panels and instruments (for FAS and BMS) like FACP, FARP, smoke detector, heat detector, IO module, DDC panels, BCM panel, thermostat, temperature/humidity sensor, pressure sensor, modulating/non-modulating actuators for valves/dampers etc.

Advanced Pressure Monitors for isolation and Operation Theater to maintain negative pressure inside.

Preparing the I/O list of BMS for final configuration by Testing/Commissioning team.

Monitor the installation, pre–testing/commissioning of Distribution Transformer and RMU.

Daily site surveillance to note discrepancies and inform related one for their rectification.

Monitor the site during execution for smooth running and control the skilled and non-skilled manpower.

Plan execution of electrical work and coordinate with mechanical and civil teams.

Maintain the quality of work according to specifications and standards i.e. NEC, IEEE, NEMA.

Conduct inspections of all incoming shipments of electrical equipment, instruments and other electrical material to observe any discrepancy in material as well as for abuse in shipping.

Performed other duties/tasks as assigned by the management from time to time according to need.

Assist Auto CAD draftsman for preparing the as built as actual installations & modifications.

Responsible for electrical material take-off for variation orders and raising orders to procurement department

Prepare electrical invoices and submitting for payment approvals from consultants/client.

Prepare quantities break down for all electrical items at BOQ and in approved drawings.

Preparing and submitting RFI and MIR for work and material inspections accordingly.

Taking care of all technical submittals for the equipment, materials, shop drawings.

Submit the testing/commissioning documents, warranty certificates, spare parts list and O & M manuals for handing over the project.

SAUDI ARAMCO-KASC Jeddah SA–Saudi Technical Group Site Electrical Engineer (June 2013 – November 2014) Duties & Responsibilities

Attending daily morning and evening meetings on site for progress reporting and look-a-head schedule.

Coordinate for safety approval prior to the start work in hazardous and risky areas.

Supervise and monitoring the installation conduits and cabling for building management system (BMS), fire alarm system (FAS), public address (PA) and two way communication system (TWCS).

Supervise the installation of panels and devices (for FAS and BMS) like FACP, FARP, smoke detector, heat detector, signal module, manual pull station, strobe, DDC panels, temperature/humidity sensor, pressure sensor, modulating/non-modulating actuators for valves/VAV/CAV as per approved drawings.

Daily site surveillance to note discrepancies and inform related one for their rectification.

Monitor the site during execution for smooth running and control the skilled and non-skilled manpower.

Maintain the quality of work according to specifications and international standards i.e. NEC, IEEE, NEMA.

Performed other duties/tasks as assigned by the management from time to time according to need.

Interpret construction drawings and study applicable specifications prior to execution at site.

Assist Auto CAD draftsman for preparing the as built as actual installations & modifications.

Coordination with the design team for latest approved revision of drawings.

Daily progress reporting to PM verbally and through proper channel. SAUDI ARAMCO-KAPSARC Riyadh SA–Saudi Technical Group Site Electrical Engineer (April 2013 – June 2013)

Duties & Responsibilities

Testing and verifying the installed Lighting, Switches, Sockets, Fire alarm devices, Data/Telephone outlets are as per approved layout and elevation drawings.

Testing and verifying the installed LV distribution panels are as per approved panel schedules, layout and elevation drawings.

Supervise and motivate site team and ensuring they are engaged, on target in line with schedule.

Control and monitor site waste in accordance with the company’s site waste management policy.

Assign the daily activities to the foremen/workers as per schedule.

Requisition for defective materials for site.

Informing the project manager verbally regarding the site situation. SZIA, Sheikh Zayed International Academy Islamabad PK–Skyways Construction Company Site Electrical Engineer (July 2010 – February 2013) Duties & Responsibilities

Supervise and monitor the installation of conduits, cable tray, building wires, LV cables and termination.

Pre-commissioning test for LV cables; like Continuity Test and Insulation Resistance Test.

Supervision and monitoring for the installation and pre-testing/commissioning of LV distribution, Small power, Lighting, MDB, Fire alarm, CCTV, Public address, Telephone etc..

Monitor and coordination with subcontractor for work progress and reporting.

Visit sites on daily bases note discrepancies and informing for their removal before client inspection.

Prepare electrical material take-off for variation order and to raising orders to procurement department.

Drawings review and coordinating with management/consultant for approval incase amendments required.

Preparing and submitting RFI and MIR for work and material inspections accordingly.

Conduct inspections of all incoming shipments of electrical equipment, instruments and other electrical material to observe any discrepancy in material as well as for abuse in shipping. If abuse is evident, damage claims procedures were initiated prior to accepting the shipment. Innovative Biscuit Factory Pvt. Lahore PK

Maintenance Electrical Engineer (January 2009 – July 2009) Duties & Responsibilities

Responsible for operation and maintenance / troubleshooting of MCC, heaters and packing machines.

Responsible for operation and maintenance of lights, switches, 1Ph and 3Ph power outlets.

Visiting all the zone multiple times daily, note discrepancies and inform related one for their removal.

Assigning daily tasks to foreman/technicians for maintenance and repair.

Planning and undertaking scheduled maintenance.

Diagnose the problem and repairing or replacing the defective parts as required.

Fitting the new parts and make sure equipment is working correctly.

Responding to breakdowns and diagnosing its cause.

Reporting GM production on daily activities and progress. SKILLS/ABILITIES

Microsoft Office and Electrical CAD

Verbal and written communication skills

Organizational skills and attention to detail

Analytical and problem-solving skills

Supervisory and leadership skills

Design skills

Contact this candidate