Post Job Free
Sign in

Electrical Engineer Power

Location:
Souq Al ASR, Cairo Governorate, Egypt
Posted:
May 22, 2022

Contact this candidate

Resume:

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 1 of 15

Personal Data

Name : Amir Nazih Kamel Barsoum Hanna

Date of Birth : March 11

th

1973

Nationality : Egyptian

Permanent Address : 18 Waly St., Kobry El-Koba, Cairo, Egypt Residence Address : Al-Hawai Residence Tecom, Dubai Tel : Egypt +201*********.

: UAE +971*********.

: KSA +966*********.

E-mail address : ****.*******@*****.***

: **********@*****.***

Languages : Arabic & English

Marital status : Married

Car Driving License : Egyptian, KSA, Emirati

Profile:

Experienced Electrical Engineer of 20+ years in the design of Electrical facilities for Oil and Gas onshore/ offshore industries, petrochemical, storage tanks, LPG, Gas processing, Deslination water plant and construction.

Vast experience of execution of EPC Electrical Power Distribution System in Greenfield and Brownfield Projects and FEED Projects for different phases and scales. Qualification

Bachelor of Engineering (B.Eng.) in Electrical Power and Machines Engineering (1996).

(Faculty of Engineering, Cairo University)

Key skills:

• Project Management Cost estimation, Man-hour estimation, Manpower planning,

• Prepare, check, and approve Electrical Engineering and Design deliverables such as single line diagrams, schematics, layouts, specifications, studies, reports, and datasheets

• Perform calculations and system studies (e.g. Load Flow, Short Circuit, Motor Starting, Harmonic, Transient Stability, Power factor correction, Cable sizing, tray sizing, lighting)

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 2 of 15

• Progress Monitoring, Engineering Execution plan, and Multi offices project execution.

• Preparation of Requisitions, Specifications, Datasheets, Technical Bid Analysis, Vendor Drawing review, for HV/LV Switchgear and MCCs, HV/LV Motors, HV/LV Transformers, HV/LV, Power and Control Cables, Control and Relay panels, AC/DC UPS Systems, Bus Ducts, Lighting Systems, Earthing System.

• Perform site surveys and define / execute modifications to existing facilities on brownfield projects

• Site construction support i.e. (SAT, MS, Procedures). Coordination with Plant Operations /Maintenance teams during Engineering and Procurement and Co-ordination/Engineering support to the site during Construction/Commissioning.

• Brownfield projects Interfaces/coordination activities i.e. Interface agreements/registers.

• Review of all Vendor Drawings associated with Mechanical, instrument & HSE packages.

• Participate in design and modeling Reviews meeting .

• Electrical Calculations and equipment sizing.

• Substation Automation Control and Monitoring System including Interface with DCS System.

• Hazard Area classification studies.

• Inter discipline Design review checks and providing necessary Electrical input

• Handling third party subcontractor’s i.e. Remote design offices, power system consultants.

• Acting as project Lead/Deputy Lead Electrical Engineer in many projects and able to perform independently All Senior Electrical Engineer activities.

• Discuss and get approval verification from Client for the Electrical Design Deliverables

• Quality Assurance /Quality control for engineering/ design document.

• Fully understands the COMPANY HSE policy, procedures, regulations and objectives as they relate to his area of responsibility

• Supervise the work of relevant discipline Engineers and Superintendents and ensure that quality and standards are maintained, and cost-effective solutions are adopted

• Perform inspection and witnessing of tests on major equipment AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 3 of 15 Software Experience:

• MS-Windows Office Package

• Plant Design Management System (PDMS)/Micro station/AutoCAD

• Smart Plant Electrical (SPEL)

• Smart Plant Review & Navisworks

• Dialux lighting design software.

• Conversant with ETAP power system analysis software.

• Electrical tools (MS Excel Spreadsheets), i.e. Cable Size and Voltage Drop, Load Analysis, UPS sizing & Earthing Calculations &, etc…

• Familiar of various Documenent control system i.e Aconex, Wrench, Idocs

&Think Project

Special Courses/Training:

• HSE Management in Oil & Gas and Petrochemical Projects...

• Risk, Probability, Consequence Analysis.

• Hazard identification theory (HAZID, HAZOP).

• Hazard Area classification.

• Earthing and lightning protection design.

• Advanced protection relays and motor control.

• Communication skills.

• Primavera P3 scheduling

• Power system analysis using ETAP.

• QMS Foundation ISO 9001:2008 standard.

Codes and Standards

• Comprehensive knowledge of all international industry codes and standards, including IEC, BS, ANSI, NEC, IEEE, API, NFPA, Shell DEP.

• Conversant of Companies standard i.e. ADNOC onshore/offshore, Qatar Petroleum (QP), ExxonMobil, BP, and SABIC

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 4 of 15 Work Experience

NOV. 2021 – Present LEAD ELECTRICAL ENGINEER

WORLEY Parsons Engineers

Red Sea Suez Canal Corridor greenfield integrated Petro-Refinery Complex Project in Egypt.

(PMC) for the early front-end engineering design (pre-FEED), front-end engineering design (FEED), and the detailed engineering, procurement and construction (EPC) phases of the project. Roles and Responsibilities:

• Ensuring HSSEQ goals, objectives and targets are met through personal leadership and involvement.

• Safe delivery and handover of the Project to the Owner, sustainably, safely, on time, within budget, ensuring that a quality product is produced that represents ‘best value’ for the Owner and their Stakeholders.

• Coordinate and supervise the Electrical Engineering aspects of the Project to ensure the technical objectives are met within the approved scope, budget, and schedule.

• Supervise, oversee and coordinate regular and timely technical reviews of Electrical related Engineering deliverables developed by the EPC Contractor and technology Licensors, ensuring design optimization in compliance with relevant codes, standards, and best practices and in close conjunction with Owner’s functional departments.

• Co-ordinate and interface with other Technical Departments, Business Units, Operations, and Maintenance functions to resolve technical issues and ensure quality Engineering execution and integrity.

• Reporting to the PMC Engineering Manager and works under his direction.

• Identifying, evaluating, and resolving Electrical Engineering issues during the EPC phase.

• Review and approve within the specified approval durations, the EPC Contractor key deliverables and other works within the Electrical discipline, ensuring compliance with Electrical design requirements and the Licensors’ PDP’s, which involves the interpretation and review of calculations, specifications, plans, investigations, surveys, structures, system or equipment with relatively few complex features.

• Review and approve the EPC Contractor’s deliverables:

• Review and approve key design documents from Vendors, equipment manufacturers or Subcontractors and prepare comments and recommendations incorporating any comments received from the Owner. AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 5 of 15

• Attend technical meeting with Owner, Licensor, EPC Contractor and Vendors.

• Attend all Project technical sessions by the EPC Contractor such as: Design Review Meetings, 3D Model Review Meeting, Constructability, SIL, EIA, HAZOP and HAZID etc.

• Ensure quality and accuracy of EPC Contractor’s Electrical Engineering design activities, system integration, and design selection.

• Supervise and manage the review and approval of EPC Contractor’s work, ensuring compliance with Owner and Project specifications, relevant codes and standards, and industry best practices.

• Coordinate the required Engineering participation in the development and analysis of various design options and business models. Contribute input and expertise in the development and analysis of various design options and business models to ensure design optimization and validation for the Owner.

• Coordinate the technical guidance required to develop new specifications and update existing specifications in line with Owner requirements.

• Coordinate other discipline Engineer’s participation in layout reviews, design reviews, and technical workshops.

• Influence Facilities and Equipment design optimization.

• Provide technical assistance and coordination with other discipline Engineers.

• Coordinate technical reviews and analysis during vendor prequalification, bid evaluation, and performance evaluation.

• Coordinate the review of technical bid submissions and perform technical bid analysis.

NOV. 2020 – OCT.2021 ELEC.& INST. CONSTRUCTION MANAGER SIDEM VEOLIA

Rabigh 3 independent sea water desalination plant (IWP) in Rabigh, Saudi Arabia project Roles and Responsibilities:

• Participate in and advise on all electrical construction activities and initiatives.

• Follow up and supervise the Contractor and sub-contractors perform the work to agreed scope of work, specifications and schedules all to an acceptable standard.

• Responsible for electrical construction activities through the contractor’s supervision in respect of HSE, method, working practices, quality and timely execution of the works.

• Advise Project staff on best practices.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 6 of 15

• Initiate and manage the electrical project element of the continuous improvement processes.

• Monitor site activities for potential contractual / claims problems.

• Maintain records of site activities and check Contractor records for accuracy.

• Ensuring effective planning and provision for the commissioning process.

• Sequencing and monitoring plant and equipment deliveries.

• Attending site meetings as required.

• Detail Planning of Pre-Installation Activities.

• Planning of Sub-Contract activities.

• Carry out regular site inspections with Client/ Design team representatives to ensure correct quality of installation.

• Ensuring quality and quantity of materials, equipment and personnel are maintained at the correct levels for installing all services and executing the works in a timely.

SEPTEMBER 2019 – APRIL 2020 SENIOR ELECTRICAL ENGINEER Chiyoda CCC Engineering Limited (CCEL)

• Zirku facilities capacity enhancement (Train-5) one of ADNOC Offshore project EPC and detail design engineering at Abu Dhabi, UAE. Roles and Responsibilities:

• Direct working with Client Engineers and liaison with EPC sub Contractors, engineers, vendors, and suppliers.

• Checking, Review, and Co-ordinate with 3rd party Engineering power system consultancy and Client to get the approval of power system studies including Load flow, short circuit, Motor starting, Transit stability, Harmonic Analysis, Relays protection coordination & Arc Flashing.

• Checking, Review and Co-ordinate with Engineering Sub-Contractor and Client to get the approval for the Drawings, Specs, Datasheets, Procedure, etc.,

• Assist with in house Engineering Team to issue the approved drawings for the Construction.

• Review and approval of Electrical and mechanical Vendor documentation in compliance with project requirements.

• Handling Electrical Interfaces agreements and with existing facilities and provide site construction Support

• Issue remaining project Electrical deliverables I .e.MR, TBE for Electrical Equipment, Issue final revision of Electrical Design basis. AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 7 of 15 FEB 2014 – AUGUST 2019 SENIOR ELECTRICAL ENGINEER

China Petroleum Engineering CPE Co., Ltd. Member of China National Petroleum Corporation (CNPC) Various Detail Design engineering oil and gas, Refinery projects Duties & Responsibilities

• Lead the Electrical Engineering activities following Project requirements within the assigned budget, schedule, and quality standards. Ensure compliance with all Project interfaces and supervise in/out information flow.

• Contribute to the capitalization of Project experience to improve and harmonize work methodologies through continuous improvement and best practices.

• Implement the Company guidelines and performance indicators monitoring within the Project.

• Provide technical support to other Project positions for specialist aspects.

• Analyze and understand Tender documentation.

• Define the Discipline list of activities and deliverables and coordinate activities following the Project schedule.

• Identify technical queries, deviations, and alternatives to be submitted.

• Implement bidding methodologies, design criteria, and guidelines.

• Prepare engineering man-hours and material cost estimations.

• Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements.

• Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the project manager for more extensive problems.

• Define the list of activities and deliverables, set up schedules, coordinate activities following contractual requirements.

• Ensure Discipline Project progress, monitor, and control man-hours consumption.

• Ensure proper Discipline workflow, interfaces, quality checks, and approval of all Discipline Project documents, including Vendor ones.

• Provide technical support to Project functions including Procurement and Construction.

• Support Project teams to solve nonstandard technical issues

• Update Discipline workflows and technical standards

• Support execution plan definition

• Participate in Vendor technical qualification and to procurement strategy definition

• Define and issue Material Requisitions

• Ensure Technical Bid Evaluations

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 8 of 15

• Ensure Vendor follow-up activities

• Provide technical support for the definition of the Discipline construction inspection plan

• Check key Project documents according to internal procedures

• Review, Control and supervise projects technical issues and power studies

(short circuit, load flow, motor starting) using EDSA software.

• Review the hazardous area classification drawings for the proper selection of the electrical equipment concerning applicable code. OCTOBER 2017 – AUGUST 2019 Project Area Team Leader Engineer China Petroleum Engineering CPE Co., Ltd.

• BAB Integrated facilities Project (BIFP) one of ADNOC Onshore project EPC and detail design engineering at Abu Dhabi, UAE

• BAB Central degassing station (BCDS) Area Team Leader responsible to deliver all related Electrical deliverables and interfaces with existing plants within BCDS Area. scope including built a new substation to supply power new train 7 degassing facilities

• Electrical Deliverables include but not limited to the sizing of Main Electrical Equipment sizing (Power /Distribution Transformers, Diesel generator, AC / DC UPS, LV switchgear), Tie in With existing OHTL network, 33kV Switchgears modification.

• Adequacy sizing checks for existing Electrical Equipment, new substation automation, and Tie in with existing SCMS, FMS systems.

• Providing power supply off pad individual Oil/WAG/Water wells by the off-grid solar PV system

• Prepare an overall project design basis.

• Direct/supervise issuing Equipment Specifications, Datasheets, Load analysis, Material requisitions/TBE, TQ

• Attend regular Design review meetings/ project engineering meetings/project control meetings/Vendor kick-off meetings.

• Review all types of plant layouts/substation layouts deliverables within the BCDS area.

• I.e. Lighting, power, Earthing, cable trench, trays routing, and substation Equipment layouts.

• Direct/supervise issuing Key SLD, protection and metering SLD, Electrical Schematics, Installation details.

• Direct and supervise of preparation of Bulk materials/cables MTO’s extracted from layouts and modeling.

• Lead the Electrical Engineering activities following Project requirements within the assigned budget, schedule, and quality standards. Ensure AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 9 of 15 compliance with all Project interfaces and supervise in/out information flow.

• Provide technical support to other Project positions for specialist aspects.

• Define the Discipline list of activities and deliverables and coordinate activities following the Project schedule.

• Identify technical queries, deviations, and alternatives to be submitted.

• Implement bidding methodologies, design criteria, and guidelines.

• Define the list of activities and deliverables, set up schedules, coordinate activities following contractual requirements.

• Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements.

• Take the necessary Corrective actions within the Discipline Project Team to meet the assigned goal. Report to the project manager for more extensive problems.

• Ensure Discipline Project progress, monitor, and control man-hours consumption.

• Ensure proper Discipline workflow, interfaces, quality checks, and approval of all Discipline Project documents, including Vendor ones.

• Provide technical support to Project functions including Procurement and Construction.

• Support Project teams to solve nonstandard technical issues.

• Support execution plan definition.

• Participate in Vendor technical qualification and to procurement strategy definition.

• Define and issue Material Requisitions.

• Ensure Technical Bid Evaluations.

• Ensure Vendor follow-up activities.

• Provide technical support for the definition of the Discipline construction inspection plan.

• Review, Control and supervise projects technical issues and power studies

(short circuit, load flow, motor starting)

• Review the hazardous area classification drawings for the proper selection of the electrical equipment for applicable IP 15 Hazardous area classification.

MAY 2017 – SEPTEBER 2019 LEAD ELECTRICAL ENGINEER

China Petroleum Engineering CPE Co., Ltd.

• BGC Rehabilitation and upgrade KAZ substation, Basrah, Iraq

• Prepare method of statement and procedure to renovate the existing substation by replacement of existing old 3.3kV switchgear by a new one with the minimum shutdown.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 10 of 15

• Prepare necessary Equipment layout drawings to build new Substation extension adjacent to the existing one showing also lighting, power, and cable trays rerouting of existing feeders layouts.

• Tie in with existing /new facilities i.e. UPS and battery room and existing distribution loads.

SEPTMBER 2016 – APRIL 2017 LEAD ELECTRICAL ENGINEER China Petroleum Engineering CPE Co., Ltd.

• West QURNA 1 Produced Water Pipeline Project, Basrah, Iraq

• Update FEED Design Basis.

• Prepare a load list.

• Prepare a cable schedule.

• Prepare lighting verification calculation report

• Prepare Hazard area classification drawings

• Review various Exxon mobile Specs and prepare Datasheets accordingly

• Design and issue plant Lighting, power routing and Earthing layouts

• Design of Cathodic Protection cabling Systems & issue transformer Rectifier data sheets

• Issue various motor data sheets

• Prepare Material Requisitions and material Take Off.

• Prepare Technical Bid Evaluations.

• Vendor Document Reviews.

• Prepare Interconnection diagrams.

• Participate in the design review meeting.

MARCH 2014 – MAY 2016 DEPUTY LEAD ELECTRICAL ENGINEER China Petroleum Engineering CPE Co., Ltd.

• Halfaya project surface facility Phase-3 and CPF3 security Defence, Basrah, Iraq

• Prepare FEED package and extended to Detail Design Engineer package

• Prepare FEED design Basis

• Direct and supervise preparing of Electrical equipment specification/datasheets i.e. Power Distribution Transformer, DG, UPS, VFD, and MV & LV cables

• Prepare Load analysis and equipment sizing.

• Direct and supervise preparing cable schedules.

• Supervise preparing SLD, protection, and metering diagrams.

• Prepare Hazard area Schedule

• Supervise preparing Standard installation details

• Earthing Calculation.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 11 of 15

• Direct and supervise preparing Material Requisitions for DG, Transformers, UPS, Switchgears, VFD, MV & LV cables, and Electrical Bulk materials.

• Supervise preparing Hazard area layout/section plans as per API 505

• Supervise preparing Lighting, Power, Earthing Routing Raceways layout drawings

• Supervise preparing substation Equipment General Arrangement layout drawings.

APRIL 2007 – OCTOBER 2013 SENIOR ELECTRICAL ENGINEER McDermott (Former CB&I Chicago Bridge & iron)

Various Detail Design engineering oil and gas, Refinery projects Duties & Responsibilities

• Designing all detailed drawings concerning lighting activities. This including lighting layouts, lighting distribution schedules, lighting block diagrams, lighting elevation drawings, and the relevant lighting installation details.

• Designing all detailed drawings concerning earthing activities. This including earthing layouts, lightning protection layouts, and the relevant earthing installation details.

• Designing all detailed drawings concerning low and high voltage switchgear substations. This included substation equipment layouts, substation cable routing drawings, substation cable routing details, and substation elevation drawings.

• Designing all drawings associated with the one-line diagrams. This including key one-line diagrams, elementary one-line diagrams for low and high voltage switchgear.

• And detailed protection/metering one-line diagrams.

• Preparation of electrical power system calculations. This including load analysis, short circuit, cables sizing, lighting, earthing, generator sizing, power factor improvement calculations.

• Analysis of power system network using ETAP and EDSA software.

• Designing the hazardous area classification drawings for the proper selection of the electrical equipment.

• Preparation material requisition either for the main equipment or for the electrical bulk materials. This included the preparation of specifications, datasheets, supplier document requirements, minimum quality surveillances, and application sheets.

• Participation in the evaluation of the received bids. Prepared the technical evaluation reports. Prepared the material requisition for purchase.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 12 of 15

• Participation in the cycle of vendor prints review.

• SCPX Project –The South Caucasus Pipeline Expansion 690 Km/42” (From Caspian Sea to Turkish border)

• Team Leader to achieve the following tasks during the FEED phase and further update in the Detail design phase

• Electrical Equipment layouts, Cable routing layouts, Lighting layouts by using PDMS Lighting philosophy, calculations, block diagrams

• Single line diagrams, metering, and protection diagrams.

• Cable schedule and Load list by using SPEL (Smart Plant Electrical)

• Hazardous are drawings

• Some Electrical data sheets

• Coordination of the relevant EPC work processes

• Prepare progress reports of the work, Planning, and Estimate.

• Reficar Refinery Expansion in Cartagena, Columbia Project

• Lighting Calculations for power and steam generation units to verify the recommended illumination level for process/plant areas using the Dialux lighting program.

• Production of lighting design layouts according to NEC code.

• Group Leader for production of instrument wiring design drawings.

• JSC Yamal LNG, Russian Project

• Create circuits/electrical equipment associations using SPEL.

• Populate reference cables and glands in using SPEL.

• Performing cables/bus ducts sizing and issuing cable schedules.

• Acting and communicate with SPEL. IT administrators group to solve the project setup type problems into SPEL.

• Cuddalore Refinery Project, Nagarjuna, India Project

• Checking all Lighting Calculations to verify the recommended illumination level for process/plant areas.

• Design and coordinate Plant Lighting and Socket outlets then Review PDMS Modeling

• Design and coordinate Cable Tray / Trench then Review PDMS Modelling

• Checking all the above-mentioned design layouts to well coordinate design drawing then update related electrical installation details accordingly.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 13 of 15

• Prepare cable block diagrams and connection diagram

• Prepare panel board schedules.

• Seller document review and data sheets update.

• Update cable /load lists by using SPEL software.

• AbuQuir Electrical Upgrade Project (Egypt)

• Site survey to enhance client requirements and deliverables

• Prepare and write up specifications for medium voltage

• Switchgear, low voltage switchgear, transformers.

• Perform Key single line diagram.

• Prepare detailed single line diagrams complete with protection schemes.

• Perform load/consumer/cable lists.

• Prepare requisitions for bulk materials and power cables.

• Prepare the main equipment substation layout, Plant power cable routing layout.

• Site earthing layouts and main substation earthing layout.

• Preparing the overall electrical MTOs

• Perform electrical design basis specifications and lighting specifications.

• Perform key single line diagrams for LPG and Gas oil areas

• Perform substations layouts.

• Prepare the plant main cables routing and definition of area classification.

• Zuidwending project (Netherlands)

• Technical handling over for the Zuidwending project in the main office located in the Netherlands.

• Perform electrical design for the grounding system, lightning protection system, cathodic protection, and lighting for the plant.

• Communicate and acting to perform the scope of work.

• Direct and supervise engineer’s prior and draftsmen in preparing well- coordinated design drawings.

• Site visit to study and implement electrical construction type problems.

• Perform an electrical cable list for all existing and expected loads. MAY 1998 – MARCH 2007 SENIOR ELECTRICAL ENGINEER

ABB - ASEA BROWN BOVERI S.A.E

Various Detail Design engineering construction, Industrial and MEP projects Duties & Responsibilities

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 14 of 15

• Lead junior engineers and draftsmen.

• Review specifications and design drawings in the pre-tender stage and check technical coordination between various disciplines.

• Review supplier's technical submittals, for compliance with technical specifications and standards.

• Direct and supervise engineer’s prior and draftsmen in preparing a well- coordinated shop drawing, to submission to a consultant for approval.

• Direct and supervise the preparation of the Bill Quantities for projects.

• Implement, whenever possible, value engineering.

• Respond, discuss, and act as necessary to security reasons to get consultant’s approvals on electrical shop drawings, on time.

• Prepare and manage budgetary costs for engineering and draftsmen works.

• Direct and supervise as-built drawings, and assist in the completion of projects handing over packages "as-built submittals, manuals…etc.

• Occasional site visits to study and resolve electrical construction type problems.

• Size up electrical cables, controls, and a well-coordinated protection system.

• Design electric distribution boards, one-line diagrams .etc...

• Perform electrical design, load calculation, including energy-saving and load shedding system.

• Assist in defining and addressing variation orders. Electromechanical MEP projects (medium, and Low voltage power system distribution, Lighting, Low current systems, BMS Automation, HVAC & Firefighting systems for the following projects

• Arkadia complex Cairo, Egypt.

• Dok Car Glasses Factory in Cairo, Egypt.

• Le Meridien Extension Cairo, Egypt.

• Anhydrous Glucose Crystals Factory Obour, Egypt.

• Oriental Resorts Sharm El-Sheikh.

• Media Production City Cairo, Egypt.

• Xerox Quarter Office Cairo, Egypt.

• The International School of Choueifat Cairo, Egypt.

• Revamp Cairo International Airport (Terminal 1 &2) Cairo, Egypt.

• Middle East Agency Cairo, Egypt.

• Jolly Ville Substation Cairo, Egypt.

• Movenpick Heliopolis Substation. Cairo, Egypt.

• UHDE Fertilizers Plant Suez, Egypt.

• UHDE Fertilizers Plant in Alexandria, Egypt.

• UHDE Fertilizers Plant Cairo, Egypt.

AMIR HANNA _SENIOR /LEAD ELECTRICAL ENGINEER Page 15 of 15

• Computer & Smart Card Factory in Obour, Egypt.

• Spinning factory Borg El Arab, Egypt.

• San Stefano Hotel Alexandria, Egypt.

• Central Bank Cairo, Egypt.

• Procter & Gamble Factory Extension Cairo, Egypt.



Contact this candidate