CURRICULUM VITAE

SHIVARAJ

Present Address: PermanentAddress :

ROOM NO-9 At:Moranahalli

DOOSHAN GUEST HOUSE Post:Betag

MUTHAGI CROSS Koppal(Tq)

KUDGI- 586216 Kopppal(District)

Email: adq1eq@r.postjobfree.com Karnatak-583238

Phone no-+91-935*******

OBJECTIVE:

Seeking for a position to utilize my skills and abilities in the field of electrical and electronics industry that offers professional growth while being resourceful, innovative and flexible.

PROFESSIONAL EXPERIENCE:

Total Experience: 10 years of experience (As on APRIL-2022)

April -2019 to present

Company:-SAI URJA INDO VENTURE PVT LTD

SITE OFFICE-NTPC KUDGI BIJAPUR KARNATAK (2400MW NTPC KUDGI BIJAPUR KARNATAKA)

ATTENDING DAILY MEETING WITH CLIENTS AS PER PO

Attending internal meetings to carry out smooth work in the plant

Planning for daily works( preventive,proactive & breakdowns)

Root cause analysis of Electrical breakdowns( to prevent further failure in future)

Man Power & materials handling

Motor control centers, HT & LT motors, installation & maintenance

Testing of Breaker (Breaker Analyzer test,Timing test,CRM test, High Pot test)

Familiar with Relay Testing, CT testing

Testing & Maintenance of Transformers (BDV test, Core balance test, Voltage ratio test)

Overhauling of motors both HT & LT

Maintenance of UPS system (Hi-REL)

Maintenance of AC drives

Familiar with SAP

Battery load testing

Maintenance of Battery Chargers

Maintenance of Actuator

Overhauling SM & ILMS system

Familiar with Relay testing work

Maintenance of Transformer ONAN, ONAF

Operation & Maintenance of vacuum circuit breaker(up to 33KV).

Maintenance of NGT & NGR

Battery Load test

Maintenance of UPS system (Hi-REL)

January 2016 to March 2019

Company:-INTEGRATED MAINTENANCE SERVICE PVT LTD

SITE OFFICE- 1200(600*2)MW ADHANI POWER PLANT LTD(KARNATAKA)

Motor control centers, HT & LT motors,

Testing of Breaker (Breaker Analyzer test, High Pot test)

Testing & Maintenance of Transformers (BDV test, PPM, Core balance test, Voltage ratio test)

Overhauling of motors both HT & LT

Maintenance of NGT & NGR

Battery Load test

Maintenance of UPS system (Hi-REL)

Inspection of Electrical & Electronics Equipment like ( PA- System pcb etc)

Maintenance of AC drives.

Maintenance of Transformer ONAN, ONAF

SEM and ILMS maintenance,

Coal sampler and its auxillary maintenance

Operation & Maintenance of vacuum circuit breaker(11KV).

September 2016 to Dec-2016

Company: POWER MECH PROJECT LTD

oSITE OFFICE--4620(330*4+660*5)MW ADHANI POWER PLANT LTD(GUJARAT)

oROLE: ELECTRICAL ENGINEER

Maintenance, overhauling and condition based monitoring of L.T & H.T Motors up to 5.5MW (BFP motors).

Maintenance, overhauling and condition based monitoring of L.T & H.T Transformers.

Maintenance, Troubleshooting of L.T & H.T Switchgears 415/6.6/11/33kv.

Maintenance, Overhauling and condition based monitoring of Wet and dry cell Batteries

LDB, SLDB, MLDB, JBs, Power DB Installations and maintenance.

Maintenance and re-installation of Illumination system inside and outside Power Plant.

Control panels, DCDB, ACDB installation & maintenance

Maintenance& trouble shooting of VFD.

Maintenance of NGT &NGR

ESP Rectiformer & heaters Maintenance

Overhauling of ID & FD Fans.

Battery load test

UPS Maintenance

Transformer oil BDV test

Beaker Analyser test

Breaker High POT test

Transformer ratio test

Transformer Core balance test

Transformer Maintenance up to 33MVA ( UAT-22kV/11kV/6.6)

Key Responsibility in this project

According notification datePTW issuing in SAP and man power allocation

Daily scheduled Maintenance and Troubleshooting work.

Attending daily meetings and report the activities and daily progress to Project management.

Ensuring the availability of resources (Materials & Human)

Inspecting the Quality of materials & works at site, maintaining all necessary records & documentation.

Feb2016 to Sept 2016

Company: ENERGO CONSTRUCTION LTD MANSA

SITE OFFICE -660*3MW TALWNDI SABO POWER LTD, TALWANDI(PANJAB)..

Company Specialists in: Design, Manufacture, Supply, Erection & Commissioning of Bulk

Material Handling Plants on Turn Key Basis, O&M of Electrical, Mechanical, Instrumentation Works at Thermal Power Station, Ports and Electrical, Mechanical Furnishing Works in Railway

Role: As Electrical Engineer in maintenance.,

Wagon tipplers in coal based power plant,

Stacker &reclaimer Coal Based Captive Power Plant up to 4980MW,

Power control centre’s, motor control centre’s, HT & LT motors,

Maintenance of AC drives etc.

Maintenance of Transformer ANAF

HTMS and ILMS maintenance,

Coal sampler and its auxiliary maintenance

Operation & Maintenance of vacuum circuit breaker (11KV).

Handling various assets of Conveyer system in thermal power plant.

RTD and BTD calibration and maintenance.

Co-ordination and monitoring for smooth functioning of the unit.

Efficient & Effective Operational & Maintenance, planning to reduce plant downtime.

Trouble Shooting & trip analysis.

Carrying out plant efficiency and defects analysis.

Ensuring all operation activities are carried out as per SOPS.

April 2012 – February 2016.

Company: CHENNAI RADHA ENGINEERING WORKS PVT. LTD

SITE OFFICE - 135*8MW RAJ WEST POWER LTD, BARMER(RAJASTHAN).

Company Specialists in: Design, Manufacture, Supply, Erection & Commissioning of Bulk

Material Handling Plants on Turn Key Basis, O&M of Electrical, Mechanical, Instrumentation Works at Thermal Power Station, Ports and Electrical, Mechanical Furnishing Works in Railway, Coaches.

Role: Electrical Engineer in maintenance department,

Planning, scheduling and executing maintenance (Preventive, Corrective and Breakdown) and also scheduling for various electrical installations & equipments in the organization.

Electrical maintenance of Conveyer system in thermal power plant.

Operation and Maintenance of 8 x 135 MW Lignite Handing systems for Thermal Power Plant.

Maintenance of 6.6KV/415 T/F with its associated Switchgear.

Operation and Maintenance of StackerReclaimer' Motors and its MCC .

Recording & monitoring various parameters from active and passive assets & conducting analysis of the same.

Troubleshooting for HT & LT Control Panels, VCB & ACB Breakers (Both motor as well as Transformers).

Operation & Maintenance of ALL MOTOR CONTROL CIRCUIT PANELS.

Operation & Maintenance of vacuum circuit breaker (6.6KV).

Operation & Maintenance of vacuum circuit breaker (11KV).

Operation & Maintenance of air circuit breaker (415V).

Operation & Maintenance of HT & LT Motors (Up to 500KW).

Operation & Maintenance of 6.6KV Transformers (up to 2500KVA).

Operation & Maintenance of 11KV Transformers (up to 2000KVA).

Operation & Maintenance of Control Transformers (up to 8KVA).

Operation & Maintenance of Lighting Transformers (up to 100KVA).

Battery load test for 2000Ah battery bank

MODIFICATION:

Modification done for incomer' control supply changeover.

Modification done for Flough gates by taking torque limit switches into service.

Relevant new equipment installation with new panels wiring.

AREAS OF SPECIALISATION

AC Motor

Transmission and Distribution,

ACADEMIC PROJECT:

Engineering project done “DISTURBANCE RECORDER FOR TRANSMISSION LINES”

IN-PLANT TRAINING AND INDUSTRIAL VISIT:

Gone to ‘Industrial Visit for “Thermal and Hydro Power Plant”mangalore.

TECHNICAL SKILLS:

Operating System : Windows 7 windows 8 & 10

Languages Know: C and C++

Other: knowledge of MS office & SAP OPERATION

EDUCATIONALCREDENTIALS

B.E in Electrical and Electronics Engineering from VVIET-MYSORE (V.T.U Belgaum) 2011.

PERSONAL DETAILS:

Date of Birth: 1-6-1989

Father's name: Virupakshappa

Gender : Male

Languages : Kannada, English & Hindi,

DECLARATION:

I hereby declare that the above information is true to best of my knowledge & belief.

Thanking you,

Date: Yours Sincerely,

Place: Bangalore Shivaraj

Contact this candidate