Kingsley C. Nduka

*, ********** ******, ******, *****, Nigeria

adpqwb@r.postjobfree.com ; Mobile: +234803-***-****; Office: +234809-***-**** https://www.linkedin.com/in/ndukakingsley

Mechanical Engineer

• I have 14+ years of professional experience in the Conceptual, FEED, detailed engineering design activities in MEP building construction and support in Oil & Gas, (including FPSO) projects.

• I have been fully involved in more than 30 projects with several site visit surveys and technical report writing that have enhanced my knowledge in Heat ventilation and Air conditioning (HVAC) systems, Low Charge Cooling System (LCCS), Building Services such as: Plumbing installations namely: Water supply, treatment and distribution, Waste Water discharge, Sewage treatment plant processing, Fire fighting services and designs inclusive for application, maintenance, and analysis. These involves calculations using several software and computer aided design such as: Autocad, Revit, Solid works, Caesar II and Auto pipe Software, vibration analysis for piping, etc.

• I am up to date with international codes and standards like piping codes and standards such as: BS, API’s, ASME’s and other international codes, standards in plumbing and pipe design services.

• Broad understanding of project development and processes, methods, skills, knowledge and experience to achieve specific project objectives according to the project acceptance criteria within agreed parameters. Well versed in value management and value engineering techniques.

• Experienced as a consultant in building service and MEP designs namely: piping designs

(including water treatment processes), air conditioning designs, waste water and sewage and Fire fighting designs and sprinkler systems also Procurement support activities including Engineering Requisitions, Technical Bid Evaluation, Specifications and Datasheets preparations.

• Working experience in installation, maintaining and repairing heating ventilation and air conditioning (HVAC) systems, Cold room refrigeration systems and other related systems such as electrical systems, DX units, heat pumps, and chillers. Core Competencies:

• Developed weekly work plan for the engineering and construction team.

• Manage all metal duct components and install all HVAC systems and monitor all provide resolutions for all emergency alarm in systems and perform repair to all ventilating and air conditioning units also supervise maintenance teams, perform repair on all refrigeration equipment and perform troubleshoot on the enlisted units. Continued…

Kingsley C. Nduka

Plumbing pipe installation and monitoring and water treatment services.

Manage all data centre applications and operate various centrifugal chillers and install and maintain dehumidification systems and oversee all maintenance activities for various technicians.

Design and provide enhancements to all conservation programs for electricity and natural gas and assist to plant instrument and perform troubleshoot on equipment and ensure compliance to all regulations.

Monitor all resources and ensure optimal utilization for same and achieve all customer objectives and provide support to all equipment and perform calculations and implement various plans for HVAC and refrigeration systems.

Evaluate all approval systems for new and revised maintenance jobs and monitor all work instructions and maintain all deliverables for projects to maintain optimal qualities within required timeframe and coordinate with stakeholders to analyse all project requirements.

Perform audit on all HVAC system and collect data and perform periodic evaluation and monitor all log books and manage all change processes and resolve all issues.

Collaborate with stakeholders to perform regular audit and ensure compliance to all corporate regulations and assist to design an efficient HVAC system and adhere to all architectural requirements.

Analyse all load programs and perform required calculations on same and manage all electrical requirements for HVAC equipment and recommend improvement

• Evaluated project plan by reviewing design, specifications, and plan and schedule changes; recommending actions.

• Identified pipe support type and locations and submit to Piping Design Section (MEP) for inclusion in the piping isometric design development for both proposed and as built model drawings. Some Selected Career Project Experience

• BRT HP Ground Flare Project – Design and installation of Hot Tapping on an existing facility.

(Construction Phase).

• MPN (Mobil Producing Nigeria Ltd) Usari Alternate Development Project. MEP designs services

• (Chevron Nigerian Limited) Escravos Terminal Diesel Storage revamp Project, Service: Pipe works

• Radisson Hotel Located at 42/44, Isaac John, ikeja, Lagos State, Nigeria. Services: MEP designs and installations such as: Water and drainage pipe works, HVAC systems and Electric Lift systems.

• (Nigerian Liquefied Natural gas) NLNG piping modification E 1422 to E 1423 Project Continued…

Kingsley C. Nduka

Professional Experience

NCK ENGINEERING AND TECHNICAL SERVICES January 2020 – Date Senior Mechanical Engineer

NDUCHUMAZLK (NCK) ENGINEERING AND TECHNICAL SERVICES is a World Class Multi disciplinary Engineering Company. http://www.nckengineeringservices.com Roles and responsibilities:

• Responsible for MEP designs namely: Plumbing, Firefighting & HVAC) and electrical systems where NCK Engineering and Technical Services is engaged to provide design services.

• Producing workshop drawings for installation.

• Ensuring that workshop drawings are being strictly followed by site team.

• Working with clients brief to ensure services provided are in line with requirements.

• Attend technical meetings both at the office and site.

• Troubleshooting and assisting the Maintenance department when required

• Material take off for project use and generate bill of quantities

• Interpret design from consultants, Provides technical advice and assistance to Contractors staff as requested.

• Interpret specifications and prepare material submittals to match specifications. NCK ENGINEERING AND TECHNICAL SERVICES January 2018 – December 2019 Intermediate Mechanical Engineer (Full Time)

NDUCHUMAZLK (NCK) ENGINEERING AND TECHNICAL SERVICES is a World Class Multi disciplinary Engineering Company. http://www.nckengineeringservices.com

Job Description:

Develop narrative specifications (Program of Requirements) that defines the technical Continued…

Kingsley C. Nduka

requirements to be adopted on all Mechanical (and Electrical) work. The latter in close collaboration with the Client, Architect and the Project Manager.

Extensive experience with Design & Engineering of: HVAC Equipment’s, Firefighting Equipment’s, Fire hose racks, External hydrant system, Sprinklers System, Gas Suppressions System, Diesel pump, Fire water Tank, Chillers, Air compressors, Pumps, Boilers, Generating plants, Sanitary installations and Effluent Treatment plan, Waste water (treatment) plants and drainage/earthing work, Manufacturing Equipment’s, CO2 systems, etc.

Extensive experience with Industrial projects (production plants FMCG/F&B) and related facilities.

Experience in projects for Multinational Clients is preferred.

Design & Engineering of all applicable design phases.

Interface management with other disciplines and parties (i.e. Consultants, Vendors, Subcontractors, Equipment Suppliers, etc.) performing other Mechanical and Electrical activities.

Continually monitors performance of all assigned Mechanical (and Electrical) engineers & supervisors under my team of operation.

Ensures quality control procedures are being followed and maintained during design & construction.

Supports the Construction Manager and Cost Engineer in the MEP related costing

Supervises the Mechanical & Electrical Works during Construction incl. safety on site

Responsible for the coordination, implementation, execution and completion of mechanical and plumbing design & engineering work.

Closely monitor and supervise the Contractors/ Subcontractors to ensure proper installation and commissioning of all mechanical (and electrical) Installations during the construction phase. Key Contributions and Achievements:

Achieved top 5% percentile status among all other employees who joined through the company graduate scheme.

Conceptualised and developed detailed MEP designs and prepared material take off (MTO), weight control calculations, and specification for pipe sizes, pipes valves, fittings, flanges, e.t.c.

Generated isometric drawings and bill of materials and spearheaded tie in preparation of detail engineering design.

Designed pipe supports (spring supports) for platforms as well as analysed and prepared weekly progress reports on concrete foundations and pipe stress analysis Using Autocad and Solid works. Continued…

Kingsley C. Nduka

NCK ENGINEERING AND TECHNICAL SERVICES December 2013 – December 2017 Associate Mechanical Engineer (Part Time)

NDUCHUMAZLK (NCK) ENGINEERING AND TECHNICAL SERVICES is a World Class Multi disciplinary Engineering Company. http://www.nckengineeringservices.com Job Description:

To develop mechanical design, being able to make technical design documents, calculations and drawings

Durational monitoring and supervise the Contractors / Subcontractors to ensure proper installation and commissioning of all mechanical (and electrical) Installations during the construction phase (weekend and holiday periods only).

Duties:

Mechanical building design from remote location such as the following areas: MEP designs such as: Piping, Heat ventilation and Air conditioning services (HVAC), Cold room fabrication and durational visit on site fabrication monitoring of HVAC duct systems, development of shop designs from remote working location due to studies.

Water engineering services such as exploration from borehole drilling to raw water treatment production to treatment (water treatment monitoring on purification processes and data analysis on schedule maintenance works and reports to these effects to be forwarded to my superior at the head office in Lagos State and also remote working locations during my study periods and weekend site inspections at some Northern Nigerians states during these periods namely: Kano state, Kaduna state, Nasarawa state and Abuja, Federal capital territories (FCT) environs respectively. Definition of working hours: Part time daily working hours starts from the hours of 2:00pm to 8:00pm weekdays and 8:00am to 5:00pm during weekends (Saturday only) and an hour break must be observed throughout these working periods according to the human resources working policy). Also work full time during school breaks and holiday periods. As stated on my employment contact documents. NCK ENGINEERING AND TECHNICAL SERVICES March 2007 – November 2013 Trainee Mechanical/Piping Engineer

NDUCHUMAZLK (NCK) ENGINEERING AND TECHNICAL SERVICES is a World Class Multi disciplinary Engineering Company. http://www.nckengineeringservices.com Job Description:

Assist with engineering design project planning (i.e. conceptual design through construction drawing development) and prepare for final quality check of working documents for high quality, and sign documents required.

Complete code required energy compliance and Leadership in Energy and Environmental design

(LEED) documentation.

Continued…

Kingsley C. Nduka

Assist the Pre Construction team with project pursuits, in the form of conceptual designs, one lines, preliminary system selections and high level energy analysis, code reviews, and support and attendance at project interviews.

Evaluate design parameters and system solutions for projects that respond to both the technical and budget requirements of the project.

Conduct engineering calculations, energy analysis, economic analysis, selection and layout of equipment, duct and piping system design.

Understanding of applications engineering including psychometrics, ASHRAE HVAC and refrigeration codes, acoustics, and controls systems.

Assist with coordination of design and installation with Project Management, Construction and Service departments, Controls, and other trade partners.

Field engineering: assist with project execution, site surveys, trade coordination, scheduling, document management and problem solving.

Computer 2D and 3D modelling of MEP designs namely: HVAC, Plumbing systems utilizing the latest modeling software and electrical systems such as Lifts, Elevators, Electrical panels, e.t.c.

Effectively and professionally communicate with colleagues and project team members.

Manage time to meet project schedules and task deadlines and prepare daily and weekly reports. Technical Proficiencies

AutoCAD, Caesar II, Auto pipe, PDMS, Autodesk Inventor, Solid works, Nozzle Pro, Revit, Lumion, MS Office (Excel, Word, Access) and MS Project.

Education and Training

Masters in Business Administration

Nasarawa State University, Keffi, Nigeria.

Bachelor of Engineering

Enugu State University of Science and Technology.

Membership of Professional Societies and Recognition ENGINEERS AND GEOLOGIST BRITISH COLUMBIA (EGBC)

Engineer In training (In view), Currently under submitted documents review and registration. The Nigerian Institute of Mechanical Engineers (NIMechE) Member, membership Number: N00142

Continued…

Kingsley C. Nduka

Nigerian Society of Engineers (N.S.E)

Member, membership Number: 33760

Council of Registered Engineers of Nigeria (COREN) Member, membership Number: R. 51,517

Project Management Institute (PMI)

Member, membership Number: #6223556

Professional Education Course

Prospective Corporate Member, The Nigerian Society of Engineers (N.S.E) Certificate Number: NSE/HQ/No 0021261

Certificate of participation at the 28th Engineering assembly Theme: Strategic Alliance Amongst Engineering Professionals for Enhanced Opportunity

(Aug. 2019)

Helicopter underwater escape training (Tropical HUET) Certified by BLISSTON Certificate Number: 8107519581119610039 (November 2019 – November 2023) Certified Six Sigma Certified Master Black Belt Program (2020) Authorized Certification ID: 139***********

Certified Six Sigma Certified Master Coach Program (2020) Authorized Certification ID: 394***********

Project Management Professional (PMP) Course with JK Michaels Certificate Number: JKM/PMP/206/012/LAG/MARCH/20

Professional Development, Trainings and Non Certificate Courses: Plumbing Design Guide Plant Design and Management System (PDMS) Software applications course Time management Health, safety and Environment (HSE) training QA/QC Workshop training Overview of EPCM International Codes and standards Business and Technical Writing

Document Control and management Communication and Presentation skills Team building ExxonMobil Fundamentals of Safety (EMFOS) LG Electronics Central Heat Ventilation and Air Conditioning, Low Charged Cooling System (LCCS) Training, Ikeja, Lagos State Installation of Cold Rooms HUET (helicopter and underwater escape training) Valid.

Contact this candidate