JESSIE R. CUMPIO
**** **** ****** *** **. Apt. *, Las Vegas, Nevada Mobile No.: 702-***-****
E-mail: adpq8g@r.postjobfree.com
POSITION:
FURNITURE DESIGNER / INTERIOR DESIGNER / PRODUCT TECHNICAL ENGINEER AND PROCESS
DESIGN ACHIEVEMENTS IN THE MARKET:
OBJECTIVE:
BEDROOM GROUP COLLECTION DINING GROUP COLLECTION ACCENTS AND ACCESSORIES OCCASSIONAL GROUP
LIVING GROUP BOOKSHELVES & OFFICE FURNITURES
OUTDOOR FURNITURES DESIGNS KID BEDS AND ACCENTS WITH THE CATEGORY OF
MODERN, TRADITIONAL & CONTEMPORARY LOOKS AND ALSO FOR CONSTRUCTION
MAIN DOORS DESIGN KITCHEN CABINETS, ISLAND &
CUPBOARDS
AND DRAPERY ACCESSORIES
SKILLS:
To entail professionalism in sharing my knowledge on technical skills. To work with positive attitude and willing to work under pressure.
Furniture designer / Accessories designer / Furniture product engineering works.
Can set-up R&D & PED department/ Make Route Sheet & Engineering Process
Can operate AutoCad2000 to 2021- 2D, 3D and 3D Max Rendering.
Full-Size Drawing in Auto Cad or by Pencil Drawing just in case.
Sketching and Pencil Rendering.
Adobe Photoshop Rendering
PERSONAL DATA:
Age : 50 years old / Filipino
Date of Birth : December 25, 1970
Civil Status : Married
Sex : Male
EDUCATIONAL ATTAINMENT:
COLLEGE : AIRCRAFT INSTRUMENTATION ENGINEERING TECHNOLOGY
Graduated: March 31, 1992 ROYAL CHRISTIAN COLLEGE Mandue City., Cebu
WORKING EXPERIENCES:
COMPANY : STELLAR WOODWERKS 2565 Chandler Ave., Las Vegas, NV
POSITION: INTERIOR DESIGN TECHNICAL ENGINEER
Inclusive Date : APRIL 15, 2021 TO PRESENT
Job Description:
*Made customized design & engineered like Kitchen cabinet, Islands, Sink, Bath Tabs and Closets base on the floor plans with using CAD detail drawings and Photoshop if necessary for rendering.
COMPANY : WALKER FURNITURE 301 S. Martin Luther King BLVD., Las Vegas, NV
POSITION: DESIGNER
Inclusive Date : June 30, 2020 UP TO April 2021
Job Description:
*Floor Interior designer, tagging and encoding the item in the system.
COMPANY : ESTETIKA HOME ACCESSORIES INC. H. Abellana St., Pagsabungan Mandaue City POSITION : DESIGNER
Inclusive Date : October 4, 2014 UP TO SEPTEMBER 2016 Job Description
*Created and designed all kinds of accessories like Drapery base on the buyer’s reference and in-house idea.
*Monitored the samples inside and outside of the factory.
*Soured - out the materials that are needed .
*Monitor the costing if it is high or too much low.
*Organized the sample swatches for new designs.
*Made update about the process for every new designs.
*Set - up the process of work with product time frame and working speed in production after the samples has been made and approve by the customer.
*Site visit to get the actual measurements.
*Read drawing plans and lay out.
COMPANY : 3F FINFINE FURNITURE FACTORY . DZ Road Saris Addis Ababa, Ethiopia 1498 POSITION : CHIEF DESIGNER
Inclusive Date : SEPTEMBER 4, 2011 UP TO SEPTEMBER 4, 2014
Job Description
*Made design & develop that will fit with available machinery in the factory.
*Modular furniture and supervise the site and In-house assembly.
*Monitored the samples and production at the factory.
*Communicated with sourcing personnel for the available materials that need to be used for the sample item.
*Monitored the cost if it is high then adjust to level the market price.
*Organized the sample swatches for new designs.
*Made update about the process for every new designs.
*Set- up the process of work with product time frame and working speed in every samples for production.
*Did some interior designs for residential, resort, office & hotel interior.
*Analyzed full-sized drawing plan and lay out.
Assisted the supervisor and engineer for the detail drawing analysis
COMPANY : SEAWAVE ( Outdoor Seating Environment ) M.L. Quizon St., Mandaue City, Cebu POSITION : FURNITURE DESIGNER
Inclusive Date : MARCH 3, 2008 TO MAY 31, 2009
Job Description
*Created and design all kinds of Outdoor furniture base on the buyer’s reference and in-house idea.
*Monitored the samples at the factory & Sub-contractors.
*Sourcing about the materials that need to be used.
*Monitored the cost if it is high then adjust to level the market price.
*Organized the sample swatches for new designs.
*Made update about the process for every new designs.
COMPANY : INMARK MARKETING PHILIPPINES INC. A.C. Cortes St., Ibabao Mandaue City POSITION : DESIGNER/SR. PRODUCT ENGINEER
Inclusive Date : AUGUST 10, 1999 UP TO JULY 30, 2007
Job Description
*Designed all kinds of furniture base on the buyer’s reference & my idea.
*Monitoedr the samples at the factory here and abroad.
*Sourcing about the materials that need to be used.
*Monitored the costing if it is high or too much low.
*Organized the sample swatches for new designs.
*Made update about the process for every new designs.
*Set- up product time frame and working speed in samples and production.
*Read drawing plans and lay out.
*Developed the design with regards to the engineering structure.
*Gave details all critical areas and place section in the drawings.
*Made assembly instruction basing the actual item in production and create knock down fittings system for every product has been approve for productions.
*Make route sheet on every parts of the item for easy engineering Instructions from where to be process the parts on every machines at the Factory.
COMPANY : MAITLAND-SMITH CEBU INC. PEZA, Lapu Lapu City POSITION : PROTOYPE SPECIALIST
Inclusive Date : APRIL 14, 1997 UP TO AUGUST 12, 1999
Job Description
*Studied and analyzed the furniture to be develop in proper engineering process with part route sheet instructions.
*Developed furniture construction designs & concept.
*Prepared new detail with good construction for final production process.
*Coordinated with all department managers and sub-contractors involving in making new sample and status of the item.
*Troubleshoots in process sample for possible technical problems and recommends corrective actions/measures at the same time quality checks all samples and evaluates adherence to technical standards.
COMPANY : KINGDOM RESOURCES CORP. Subangdaku Mandaue City, Cebu POSITION : DRAFTSMAN II
Inclusive Date : FEBRUARY 1, 1995 UP TO APRIL 5, 1997
Job Description
REFERENCES:
* Made full-size drawing base on the 1/8 scale drawing.
*Recorded all information regarding the item from samples.
*Made details about the construction of the product.
*In-charged in making process of every item assigned such as wooden furnitures, metal furnitures or cast and accessories.
*Prepared new detail with good construction for final production process.
*Monitored the product after being drawn.
*Made follow up regarding the drawing in the sample to avoid any mistake during cutting of the pattern in the machinery.
DANIEL DAVID WISTIHUFF III
President
Estetika Home Accessories Inc.
H. Abellana, Pagsabungan Mandaue City, Cebu Philippines
ENDALE YIRGA
President
3F FinFine Furniture Factory ( PLC ) DZ Road Saris Addis Ababa Ethiopia P.O. Box 1498
BRYAN K. WISTIHUFF
President
Seawave ( Outdoor Seating Environment )
M.L. Quizon St., Mandaue City, Cebu Philippines
DANIEL DAVID WISTIHUFF III
Managing Director
Inmark Marketing Philippines Inc.
A.C. Cortes St., Ibabao Mandaue City, Cebu Philippines
JIM PARSON
President PVI, CHINA
WORK IN FREELANCE COMPANY:
For: Uttermost / Traditional / Modern
U.S.A.
( Designer )
HeatherBrooke(Justin Camlin)
2185 Storage Road Sumpter, SC 29153 U.S.A.
( Designer )
Peace Industry Humen, Dongguan City China
( Designer & Technical Consultant )
Funitureville Company
Bitis Guagua, Pampamga City Philippines
( Designer & Technical Consultant )
Cymru Fine Furniture & Accessories Traders
Canduman Road, Mandaue City Cebu Philippines
( Product Engineer & Route Sheet Maker )
I hereby certify that the above information is true and correct to the best of my knowledge.
Signature of Applicant