Instrumentation Engineer Maintenance Superintendent

BASSEY ELISHA EKPO

ELECTRICAL & INSTRUMENTATION ENGINEER

Enthusiastic & talented electrical/electronic engineering graduate with seven years experiences in instrumentation & control having a good background not only in design, drafting & testing but also in installation, calibration, configuration, troubleshooting & repairs of instruments.

CONTACT/ADDRESS

18 18 Rumuolukwu Road Eneka. Rivers State. Nigeria

+234**********, +234**********.

https://www.linkedin.com/in/elisha-bassey-2496bab5 **************@*****.***

TRAINING/ CERTIFICATIONS SKILLS/ EXPERTISE

EXTERRAN (ARIEL KBZ operation & maintenance

EXTERRAN (275GL+maintenace & repair)

Trained in Centum Vp Dcs basic- yokogawa India Ltd

UDEMY online academy (PLC programming basic)

KHRONE online academy (Guided wave Radar GWR &

FMCW Radar level transmitter) Online Training

KHRONE online academy (coriolis mass flowmeter,

Electromagnetic, vortex meter, Ultrasonic & Clamp-on flowmeter ) Online Training

EMERSON (Temp. & Press. Controls)Online academy

EMERSON(Universal XR controller)Online academy

FLUKE (Electrical Measurement Safety) Online Training

FLUKE (Insulation Resistance Testing) Online Training

FLUKE (Digital Multimeter Basics) Online Training

ALISON (control valves/on-off valves) Online Training

ULTRALOG GLOBAL CONTROL LTD (PCV,PSV,PRV/PORV)

CX (Commissioning and Startup)

SETLAG LIMITED/ SHOREGROUP NIG. Ltd (Electrical

Industrial controls)

ACL (Trained in instrumentation, process measurement, calibration, control system & documentation)

ControlNet Limited (Instrument calibration,

troubleshooting & repairs.

GIWOST-Trained In HSE 1,2&3.

GIWOST- Trained In Basic First Aid & CPR.

Oxford Computer Training Institute-Trained in (Ms- Excel, Ms-Word & Powerpoint)

Certificate Of National Service (NYSC)

Medical fitness certificate

Covid-19 Vaccinated

Leadership/ team work and interpersonal skills.

Good communication skill.

P&ID, PFD, loop diagram, gate logic, Relay logic, Ladder diagram & instrument hook-up drawing.

Full knowledge of process control system & measurement.

Working/ testing of electronic control systems including microprocessors, sensors & final control elements used in automated process.

Calibration of pneumatics, electronic & SMART

transmitters of different makes for measurement of pressure, differential pressure, level, flow, temperature, interface level & density using different types of calibrators, simulators & configurators

Familiarized with control narratives, control philosophy, cause & effect matrix, open & close loop system.

Knowledge of control system architecture/ Integration, I/O wiring, troubleshooting, such as Yokogawa centum VP, Emerson Delta-V and Allen Bradley PLC.

Contactor & relay logic wring/manipulations

Experience in metering, meter proving, use of LACT unit, troubleshooting and calibration of turbine meters, coriolis meter, ultrasonic meter, dewpoint/moisture analyzer and gas chromatography (GC).

Calibration & troubleshooting of portable and fixed gas detetors.(MSA, Drager & BW tech.)

Experience in gas turbine & power generation.

Sound computer knowledge (microsoft word & excel)

Knowledge in Residue Gas Compressor (RCG)

operations, troubleshooting/maintenance.

Servicing & calibration of control valve with

SMART/DIGITAL positioners of different makes.

safety valves (PSV, POPRV). Partial stroking & testing of PCV, SDV,etc.

Preparing master data sheet for PM schedule

ensuring safe and efficient performing of

preventive/corrective maintenance.

Loop test, troubleshooting & installation

Perform pre-commissioning / commissioning tasks

EMPLOYMENT HISTORY

Shell Petroleum Development Company (SPDC)

LOCATION: SOKU Gas Plant, Rivers State. Nigeria.(2021- Date) POSITION: Instrumentation support engineer (contract) DEPARTMENT: Operation and Maintenance

RESPONSIBILITIES

Initiate, implement and manage the maintenance

strategies based on best practices in the industry, with an emphasis on planning /scheduling

preventive / corrective maintenance to sustain the integrity of the facilities and products to meet the Corporate production objectives

Demonstrate a technical knowledge of the operation, troubleshooting, maintenance, basic programming

and configuration, and repair of the following plant electrical, instrumentation, and manufacturing

systems.

Assemble and calibrate F&G instrument like open

path gas detectors, smoke detectors, flame/heat

detectors, point gas detectors, etc. Work also includes configuration, troubleshooting and maintenance.

Performed calibration of process controls and

monitoring systems including flow meters (Yokagawa, Foxboro, Rosemount, D/P Cells with orifice sections, Krohne (coriolis meters, temperature and density

meters), level detection meters (guided wave

radar/ultrasonic), temperature devices (RTD

thermocouples sensors)

Loop checks, calibrations, and troubleshooting of instrumentation field devices involving level, pressure, temperature, flow, and vibration switches. Brands

such as: Rosemount, flowserv, yokogawa, K-Tek,

Nuflow, Rotork, etc

Perform control strategy checks, trending, using DCS and HART Communicator to check instrument

configurations and calibration

Coordinated projects with outside vendors to upgrade and replace outdated or malfunctioning systems in the plant to improve plant performance

Uses facility operating procedures and equipment technical manuals to maintain and repair facility

equipment and ensure equipment is operated within

operating ranges.

Perform calibrations, maintenance and

troubleshooting on Foundation Fieldbus DCS System

Responsible for completion of all work orders and verifying completion of work and documenting

discrepancies and Out of Tolerances(OOT).

Supervise closely Vendor Services on board. Prepare, follow and close out the visits with proper reports to the I/C Supervisor, Maintenance Superintendent, and OIM

Sterling Oil Exploration & Energy Production Company Ltd LOCATION: Kwale, Delta State. Nigeria. (2020 - 2021) POSITION: Instrumentation Foreman

DEPARTMENT: Operation and Maintenance

RESPONSIBILITIES

As instrument foreman responsible for the carrying out of routine maintenance activities on all the

field instruments & documented accordingly.

As instrument foreman, assigned to supervise

and monitor the installation of different type

field instrument. Inspection, calibration, loop

simulation based as per organizational procedure

and standards.

Job planning, PPT, SOP preparation and

supervision of construction activities and also

bringing progress report to the maintenance

supervisor.

Coordinates all instrument work which may involve work in the field and workshop as such that the

work is carried out completely and efficiently. Keep a written daily log of all inspection performed, test results and other information pertaining to the job.

Carry out revalidation of PTW while on shift. HSE rules, JSA, Pep-talk, etc. Involved in maintenance, shutdown and back to service operations. Follow the PTW Procedures before commencing any activities

and coordinate with operation team leaders.

Configured and commissioning GWR type LT,

Ultra sonic level transmitter Ultrasonic

flowmeter

Assigned to assemble sensitive instrument like open path gas detectors, flame detectors, point gas

detectors, etc. Work also includes loop checking,

trouble shooting and pressure leak testing of

instrument air lines tubing.

Assigned also to calibrate field instrument like fieldview level transmitter displacer type,

magnetostrictive, siemen/ vega level and pressure

transmitters, flow transmitters, switches and

temperature instruments, etc.

Training by YOKOGAWA vendors during

commissioning as SIS and DCS operator using

the interface console to monitor and send false

and open signals of valves to the field technician, monitoring the process condition through the

graphic view, etc

EMPLOYMENT HISTORY

GREENVILLE LNG, Rivers State. Nigeria.(2019-2020)

POSITION: Senior Instrumentation Technician

DEPARTMENT: Operation and Maintenance

RESPONSIBILITIES

Perform servicing of all electronic, pneumatic,

mechanical, electro-pneumatic, hydraulic and

instrument & control system and devices in accordance with the established maintenance technical procedures.

Perform on-line calibration, fine tuning, adjustment & test on field instruments.

Calibration & configuration of transmitter/transducer using different type of field communicators &

configurators such as, AMS Trex & 475 Hart

communicator, Druck calibrator, loop/process

calibrator, fluke 754 documenting process calibrator.

Calibration of ELECTRONIC/SMART transmitters of

different makes for measurement of pressure,

differential pressure, level, flow, temperature, interface level & density.

Bench/ on-site calibration of process measuring

instruments such as pressure/temperature gauge,

pressure, DPT, level (Radar level) & temperature

transmitters.

Servicing & calibration of control valve with

SMART/DIGITAL positioners of different makes,

(fisher, siemen, masoneilan, flowserv, YTC,etc).

Calibration of pressure, temperature, flow, limit switch, level switch, gauges, I/P converters, pressure

transducer/sensors of different makes. Calibration and servicing of electronic and pneumatic controllers

(Fisher, Foxboro)

Calibration & function test of UV/IR flame detectors, smoke detectors, heat detectors, gas detectors (make- honeywell & Det-tronics) Fixed/ open path.

Control system troubleshooting, maintenance and

instrument loop check.

Partial stroking, testing maintenance of PCV, SDV/ ESDV

Carry out other duties as required by the management. PRIME ATLANTIC CEGELEC (PACE) NIG LTD. LAGOS

CLIENT: TOTAL E&P EGINA PROJECT

PROJECT: EGINA FPSO (TOTAL)

DESIGNATION: E&I TECHNICIAN

PERIOD: 26TH JUNE -30TH Oct, 2018

JOB DESCRIPTION

Observing execution plan for all electrical and

instrument commissioning using the project Work

Package Standard and project specifications

Calibration of Process Instruments such as; TT,

PT, PDT, FT, LT transmitters, RTD PT100

sensors, testing of solenoid valves. Calibration of pressure control valve PCV & ESDV.

Complete Loop testing/trouble shooting on PCS/

PSS system and FGS instruments.

Line check, Loop check and Commissioning of

instruments.

Loop check, functional test, OTP, troubleshooting, pre-commissioning, commissioning & start-up

EDUCATION

Federal Polytechnic Nekede Owerri, Imo State

E Electrical Electronics Engineering (OND) 2013-2014 Electrical Electronics Engineering (HND) 2015-2017 Egad Comprehensive, High school. Akwa Ibom

S Secondary School Certificate (WASSEC) 2003-2009

BIO DATA

Sex: Male

Marital Status: Single

Nationality: Nigerian

Language: English & Ibibio

HOBBIES

Traveling, Reading & playing Piano

PASSPORT DETAILS

Passport No: B00379035

Date Issued: 10-05-2021

Expire Date: 09-05-2026

REFEREES

Available on request

Contact this candidate