Juanito C. Bautista
Blk.* Lot ** Ph-* Andrea Paz Pabahay
Barandal, Calamba City, Laguna, Philippines
Mobile Number: +639********/+639*********
Email address : adply4@r.postjobfree.com
Position Applied : Electrician
Summary of Work Experience
I Had Already Accumulated 20 years Working Experience in Electrical. Which Includes Construction, Operation and Maintenance of Industrial Power Generation and Oil & Gas Plant & Refinery, Works Include Trouble Shooting, Analyze Job, And Perform Preventive Maintenance of all Electrical Controls Such as Switchgear and MCC Panels, Attends Emergency Breakdown and Rectify in Accordance with Scope of Work and Specification. Coordinate with the Team. Insure that the Availability and the Efficiency of Machine and Associated Equipments are in Running Condition. Additional Works Perform in Instrumentation and Control Calibration Such as Programmable Logic Controller (PLC), Ability to Perform All Electrical Works in Industrial Plant and Oil & Gas Plant & Refinery.
WORK HISTORY
Position : Facility Technician
Company : Imperial Pacific International (CNMI),LLC.
Present address : CPL Derence Jack Road, Orchid Street, Garapan, Saipan
MP 96950
Telephone no. : +670-***-****
Mobile number : +670-***-****
Inclusive Date : Nov. 15, 2017 to Present
Duties and Responsibilities:
Assist facility manager/engineer to executive maintenance plan and all necessary
Works. Responsible for execution of all facility management relative activities within the premises. Oversee/manage daily operations and preventive maintenance of all maintenance works. Refurbishment, Improvement works for both builders and E&M work. Execution of the preventive maintenance programs, Perform other related duties as assigned.
Assigned parameter monitor reading of all UPS room, Electrical system, HVAC unit and Chiller unit, Cooling tower unit to be check the actual value of all the system are in good condition
Troubles shoot of all Electrical and mechanical works according with Scope of Work and specification.
Assigned temperature monitoring system at casino area to maintained the temperature inside the casino area.
Performed the generator if there is power outage and checked all actual parameter reading on the generator if the generator is running condition.
Assigned and execute of the preventive maintenance on the chiller like a recharge refrigerant.
Assigned to checked UPS battery are in good condition and replace there is one of them are not proper functioning.
Coordinate with the team member to insure that the availability and the efficiency of Machine and associated equipments are in good running condition
Position : Facilities Technician
Company : Sodexo on-site Service Phil. Inc.
Present address : 11th floor B.A. lepanto building,
8747 paseo de roxas st.
Makati city, Philippines
Tel. no. (02) 831-2909
Inclusive Date : Nov. 09 2015 to Nov. 10 2016
Duties and Responsibilities:
Testing & Commissioning of CCTV Using Monitoring System Inside the Control Room
Termination of all control cable at the building management system (BMS) in bms
Building inspection and Monitoring of all electrical and building management system fault or alarm signal on the system.
Monitor and check main breaker load amperes to verify actual load on the system and to avoid main breaker trip.
Position : E & I Technician
Company : Kansanshi mining PLC Project
Present address : Solwezi Republec of Zambia Africa
Roaming no. : +639*********
Inclusive Date : April 07, 2013 to October 06, 2013
Duties and Responsibilities:
Installation, Testing & Commissioning Activities Work of CCTV in Control Room
Function testing of all instruments within the treatment plant facilities.
Ensure the quality of output of the instrumentation functional testing.
These require the instrumentation to be tested for the following, Calibration of the device, Range, Alarms, Trips and Interlocks.
Assist in the final testing of instrumentation to ensure proper operation, where an instrument does not perform the appropriate function, troubleshooting of the cause, this may require further testing, modification of the instrument parameters or in some cases replacement of the instrument
Position : Instrument Technician
Company : Kentz Engineers & Constructors
Present Address : Ambatovy Nickel Mining Project
Madagascar SARL, Africa
Roaming no. : +639*********
Inclusive Date : August 13, 2010 to October 07, 2011
Email address : adply4@r.postjobfree.com
Duties and Responsibilities:
Calibrate Pressure Transmitter (PT) to be check actual value going to Pressure Element
Termination of Control Cable Inside the Control Room from (DCS) Distribution Control System to Marshalling Cabinet
Installation and Testing & Commissioning of Instrumentation and Electrical Distribution and Protection System.
Installation, Testing & Commissioning Activities Work of CCTV in Control Room Area
Function and testing of all instruments within the treatment plant facilities.
Ensure the quality of output of the instrumentation functional testing.
These require the instrumentation to be tested for the following, Calibration of the device, Range, Alarms, Trips and Interlocks.
Position : Electrical Technician
Company : CTJV Supply Rasgas/Exxonmobile Company (PMT Engg.)
Present Address : Ras Laffan Industrial City, Doha Qatar
RGX6/7 & AKG2 Rasgas Project
Roaming no. : +639*********
Inclusive Date : July 07, 2008 to December 24, 2009
Email address : adply4@r.postjobfree.com
Duties and Responsibilities:
Coordinate to the team operation expansion dept. (OED) regarding the daily work activities on chiyoda technip joint venture (CTJV) to witness testing and commissioning job.
Responsible to testing & commissioning at all electrical system in substation; Breaker functional testing and check actual ratio, motor control circuit interface testing, auto transfer switch and manual transfer switch testing 33kV to 415volt, local control switch and instrument relay panel functional testing, Final Inspection at all electrical system, Medium voltage and low voltage intertrip testing, Under voltage and over voltage testing, current transformer testing, voltage transformer ratio testing, differential protection restricted earth fault and interface testing, voltage transformer secondary injection testing, Motor solo run testing @ 2hrs. low voltage and 4hrs. medium voltages and check In-phase and intertrip.. Pre-charge Sequence Test at energized variable frequency drive (EVFD).
Commissioning team permit to work system support chiyoda technip JV (CTJV) main contractor, installation and building modification work.
Responsible for inspection and supervise construction of electrical work activities. Provide technical support for E&I main contractors for work packages. To ensure electrical work is completed compliance with project specification, Safety policies and procedure, review electrical quality verification documents
Attending final walk thru at mechanical acceptance certificate (MAC) held in rasgas QA,QC
Position : Instrument Technician
Company : Kentech Sakhalin Technical Service
Present Address : Yunona Prigorodnoye Settlement
Korsakov Area, Sakhalin Russia
Telephone Number : +742**-******
Fax Number : +742**-******
Website : www.kentech.ie.
Inclusive Date : March 1, 2007 to February 28, 2008
Duties and Responsibilities:
The Said Monitoring System is Conveniently Installed at Under Brand Area for Application the Equipment with Multi-System which Transmit and Relay Frequency From Train Units and Stations to Main Nerve System (Transceiver) With the Use of Aerial Antennas which Interconnects to OBC Panels in Every Station.
Gladding and termination of secondary cable from JB to control valve
Termination of Control Cable Inside the Control Room from (DCS) Distribution Control System to Marshalling Cabinet
Loop check,meggering of primary and secondary cable before glanding
Assist vendor to finalist panel marshaling cabinet going to (DCS) Distribution control System and (LCS) Logic Control System
Position : Electrical & Instrument
Company : (CCIC) Consolidated Contractor International Company
Address : CCIC/RLX Project Doha, Qatar
Inclusive Date : December 12, 2004 - July 03, 2006
Duties and Responsibilities:
Assist of electrical and commissioning testing (CMS&A) main contractor. Commissioning of ELICS System (Foxboro I/A System) power distribution. Power generation, load shedding control
Pulling cable of fiber optics cable from distribution control cabinet (DCS) to marshalling cabinet and termination.
Gladding and termination of instrument such as temperature transmitter and pressure transmitter.
Meggering and continuity test of primary and secondary cable.
Position : Electrician 11
Company : SKI First Balfour Joint Venture
Address : 7F Sage House Condominium
110 V. A. Rufino Street Legaspi Village, Makati City
Inclusive Date : January 23, 2003 - December 05, 2004
Duties and Responsibilities:
Testing & Commissioning Activities Work of CCTV in Control Room Area
Installation and erection of 69kV and 13.8 KV transmission live (from erection, dressing and stringing of poles)
Responsible to Check of Electrical Device to Ensure their No Damaged Before to be Installed
Installation of Panel Board and All Breaker Switch, And Termination of all Lighting & Power Socket
Position : Electrician 111
Company : First Philippine Balfour Beatty
Address : Rockwell Retail and Carpark Project
Leighton Contractor J.P Rizal Makati City Philippines
Inclusive Date : August 08, 2000 – March 15, 2001
Duties and Responsibilities:
Termination of (HV) High Voltage (LV) low voltage cable
Testing & Commissioning of CCTV Using Monitoring System Inside the Control Room
Gladding & Termination of all Coaxial Cable Using for CCTV
Panel board installation of safety switches
Installation & Termination of Electrical Lighting fixtures
Position : Electrician 111
Company : First Philippine Balfour Beatty
Address : (MOGP) Malampaya Onshore (SPEX) Shell Philippine
Shell Refinery, Tabangao, Ambulong, Batangas City
Inclusive Date : March 31, 2001 - June 21, 2001
Duties and Responsibilities:
Installation and Assist Testing & Commissioning of Instrumentation and Electrical Distribution and Protection System.
Gladding and Termination on the Motor Control System Using “Hawke Compressor Gland.
Installation Gladding and termination of “Aircraft Warning Device” in Flier Area
Position : Electrician
Company : Uniwel Technologies Corporation
Address : P.B. Com Tower Ayala Avenue cor. Herrera St. Makati City
Telephone Number : 6334-841 – 44 / 631-8651
Inclusive Date : February 15, 2000 – July 30, 2000
Duties and Responsibilities:
Wiring and Termination of auxiliary cable
Lighting installation
Cable pulling installation
Panel board installation
Panel board installation of safety switches
Cable tray installation
Position : Lead Man / Electrician
Company : Asia Dynamic Electric Corporation
Address : Km. 24 Dantrade Compound Ortega’s Ave. Extn. Taytay Rizal
Inclusive Date : March 23, 1999 – February 07, 2000
Duties and Responsibilities
Supervise and Monitor Assemble of Electric Motor Control System Dynamic Pump
Mounting and assembly
Wiring different type of motor wiring
Disassembly pump unit
Check up possible damage
Assembly of pump unit
Cleaning and repainting of pump repair unit
Disassembly motor unit
Check up possible defective bearing
Position : Electrical / Maintenance
Company : Assistco & Energy & Industrial Corporation
Address : Petron Bataan Refinery, Limay, Bataan Project
1st Ave. Bagumbayan, Taguig Metro Manila
Telephone Number : 8238101 – 02
Inclusive Date : April 29, 1995 – March 27, 1998
Duties and Responsibilities:
Monitoring of Back up Emergency Diesel Generator
Supervise and Maintained of Power Supply of Fabrication Shop
Trouble Shooting of Magnetic Contactor at Electric Motor Generator
Repair and Trouble Shooting Assembling Hobart Welding Machine
Position : Electrical / Maintenance
Company : Lim Kim Steel Builders Incorporated
Address : 110-152 Octagon St. Bo. Dela Paz Pasig Metro Manila
Telephone Number : 9473841-42
Inclusive Date : August, 1993 to January, 1995
Duties and Responsibilities:
Maintained of Power Supply of Fabrication Shop
Trouble Shooting of Magnetic Contactor at Generator Motor
Repair and Trouble Shooting of Hobart Welding Machine
Panel Board Installation of Switches Board and Termination
Trouble Shooting, Operate and Repair Assembling the Over Head Tower Crane
PERSONAL DATA
Age : 50
Date of Birth : March 27, 1968
Place of Birth : San Pedro, Laguna
Sex : Male
Civil Status : Married
Religion : Roman Catholic
Height : 5’6”
Weight : 126 lbs.
Language Spoken : English / Tagalog
Person to be contact in case of Emergency: Gina C. Bautista
Education Background
College : San Pablo City National School of Arts and Trade
Course : Electrical Technology
Year Graduated : 1993
Secondary : Tagkawayan National High School
Year Graduated : 1987
Primary : Brgy. Bamban National Elementary School
Year Graduated : 1982
Seminars and Training Attended
Calibration for Process Instrumentation
July 15, 2006 to August 19, 2006
Meralco Foundation, Incorporated
OFW - Computer Training Course
August 12, 2005 to December 09, 2005
Philippine Embassy Doha, State of Qatar
Philippine Steel Coating Corporation
On-job training (Electrical shop, engineering department)
Local Manpower and Youth Council
Practical Electricity
Meralco Foundation
Residential Electrical House wiring Installation
Philippine Asia Training Center
Switching device termination. Splicing joints cable standard termination of panel board. Knowledge on using different testing instrument.
Other Skilled
Driving - License No. D04-02-172816
Character References:
Eng. Mariano P. Sevillion Sr. Eng. Rene Bautista
Project Engineer Electrical Superintendent
3/F Benpres Bldg. cor. Meralco Asia Construction and Development
Exchange Rd. Ortigas, Pasig City Corporation
Edward G. Carroll Anowar Hossain
Electrical Specialist Engineer Site Electrical Engineer
PMT Electrical Dept. FOC-4-4 PMT Electrical Dept. FOC-4-4
Rasgas Limited Company (PMT Engg.). Rasgas Limited Company (PMT. Engg.)
Mob. 6764403 Mob. 6578651