Instrument Engineer Instrumentation
Resume:
Zainulabedin
******************@*****.***
+234-915-***-****
Overall 9 years with Gulf & Africa countries experience in Oil & Gas Engineering Sector for Refinery, Petrochemical, Gas plants and On shore & Offshore Project Instrumentation Basic, Design & Detail Engineering and site support, DCS ( Delta V ) system, Pre-commissioning, Commissioning, Vendor Package, F&G System, Instruments Impulse line, Impulse line Testing,Handle Manpower activities. To work in a challenging environment of a firm where I could prove myself and persistently contribute to the growth of the Organization To work in a challenging environment of a firm where I could prove myself and persistently contribute to the growth of the Organization.
4 Years Full time Under Graduate Degree B.E., in Electronics Telecommunication & Engineering with First Class in 2012 from Institute of Terna Engg College, Dr.Baba sahib University, Maharashtra India.
Engineering Skills:
Preparation of specification, Datasheet, Technical Queries(TQ), Vendor offer re- view, TBA, Vendor drawing review of Control system (DCS-Delta V), Shutdown system (ESD), Fire and Gas system(FGS), MMS system and Valves and various field instruments. Preparation & Pre-commissioning & Commissioning, attending Site Engineering Request (SER) & Revising Engineering deliverables in accordance with SER.
Calibration of Control Valve- Globe Valve, Ball Valve, Butterfly Valve, Solenoid Valve, ON/OFF Valve.
Calibration of Transmitters and various field Instrumentation.
Vendor Package, Instruments Impulse Line, Testing of impulse line.
Factory Acceptance Test (FAT) of Distributed Control System (DCS), Emergency Shutdown System (ESD), Fire & Gas system (FGS).
Field Instrumentation Loop Check, Calibration, DCS Control Panel Power Up.
P&ID & Hook Ups, Instruments Loop Drawing Review, co-ordination with client/other disciplines. Mechanical and Instruments Vendor package items offer and vendor drawing review.
Control Valves, Safety Relief Valves, and Orifice Plates.
Generating Instrument Loop Diagrams (ILD) for Conventional and Foundation field bus (FF) and Segment drawings.
Vendor Packages Start Up, Calibration, Loop Check, Instruments Impulse Line.
Conduct TBT safety Meeting.
Conduct TBT as per ADNOC, ADCO Rules.
RESUME – Instrumentation Engineer
Objective
Educational Qualification
Skill Profile
Process Impulse line, Selection of Impulse Materials.
Preparation of engineering drawing deliverables, Cable Block diagrams, Interconnection diagrams, Hook UP, Instrument Loop Diagram, Cable routing layout, Instrument Location Layout Tray, Junction box Location Layout Cable and conduit schedule, Junction Box Schedule, Instrument Installation Schedule.
HAZOP, LOPA, BCPS, SIL, Functional Test of HIPPS System.
Software Skills :
Parascadda- Autospool V3
Smart Plant 3D (version 2011)
Smart Plant Review
Smart Plant Foundation
Auto CAD
Spread Sheet/Office Packages (MS-Office)
Overall Project Responsibilities:
Preparation of project scope of work and Instrument, system specifications and philosophy.
Preparations of Instrument index by review the P&ID.
Preparation of I/O list by review the P&ID.
Pre- Commissioning, Commissioning, Field Instruments Calibration, Power Up of Control Panel.
Preparation of Instrument Data Sheets for all the field Instruments and Control valves.
Performing Vendor offer review, Technical Bid Evaluation and preparing material requisition.
Loop check Hot Loop, Cold loop, Calibration of all Types of Control valve & Various Instrumentation
Selection & Sizing of Orifice Plate, Restriction Orifice and Control valves.
Vendor drawing review & Coordination with other disciplines.
Preparation of Process Hook-Ups and Pneumatic Hook-Ups and calculation of BOQ.
Preparation of Instrument Cable Block diagrams.
Preparation of Impulse line, Air Line.
Preparation of Cable Schedules & Interconnection diagrams
Preparation of Instrument Location Layout.
Preparation of Instrument mounting typical drawing and Material Take-off list (MTO).
Preparation Instrument Installation schedule.
Onsite coordination for the modification and updating of Hook up, index, Additional Loop creation etc.,
Data Collection from Client’s Electronic data management system for all Brown field Projects.
Testing & Commissioning, Pre-commissioning, of field Instrumentation, Devices & Control Panel.
Loop Check, Functional Test, Installation Calibration &Testing of Fire & Gas System.
Conducted FAT DCS Control Panel & Electronics Control Panel.
Pre-commissioning, HIPPS Panel, Fire&Gas System Installation Pre-Commissioning Functional Test of field Instrumentation.
Commissioning, Pre-commissioning, of LV Control Panel.
Preparation of Dossier Documentation, System, Subsystem, Packages as OFFSHORE Projects Based.
Good Knowledge of Pre-Commissioning Technical Documentation Handover.
Have good Experience P &ID, Instrument Loop diagram, Instrument Hook-up drawings.
Study Drawing of IGA- OGA Lay out, BOQ, Instrument Layout, Cable Routing,
JB Layout, Cable Schedule, Termination Details, Loop Diagram.
Instruments Vendor Packages, Skid Installation & Pre-Commissioning.
MMS Control System.
Current Organization: Onshore Construction. Nigeria
(Contract with Dangote Refinery)
Onshore Construction have been in the EPC/Pre-commissioning business which provides a full range of technical and project management skills, from design through procurement, construction, commissioning and start-up to assist clients in developing and upgrading facilities. Duration : August 2020 – Present ( Project:- Dangote Refinery, Dangote Fertilizers ) Position : Instrument Engineer
Roles and Responsibilities:
Preparation of Total Instrument Package of deliverables for Well Hook up facilities including data sheets, Loop diagram, and Installation drawings.
Participates in reviews of Process Flow Diagrams and Piping and Instrument Diagrams.
Participates in the preparation of equipment lists, instrument index and process specifications for instruments.
FAT, executed test plans and preparation on IO lists for the same, and loop testing of DCS panel.
Participates in the preparation of Process Impulse line.
Erection Commissioning& Calibration of Field Instrumentation & Control (Control valve, Flow meters, Diaphragm Valve, actuator Valve, FF Segment, 848T RTD JBs.
Erection and commissioning of field instruments installation, including grounding and power distribution, supervision of subcontractor, customer Relations, contractors / vendors relation, reporting etc, Loop checking of field Instruments. field instruments Calibration with AMS Software Version 12.10.1
Previous Organization: Archirodon Construction Overseas, Abu Dhabi.
(Contract with ADNOC OFFSHORE)
Archirodon Construction Overseas have been in the EPC business which provides a full range of technical and project management skills, from design through procurement, construction, commissioning and start-up to assist clients in developing and upgrading facilities. Duration : March 2017 to 29the Dec 2018) ( Project:- ADNOC, ADCO OFFSHORE ) Position : Instrument Engineer
Professional Experience
Previous Organization: ATPC, Mascat Oman.
(Contract with MOH, PDO)
ATPC have been in the Industrial & Commercial business which provides a full range of technical and project management skills, from design through procurement, Automation Services, commissioning and start-up to assist clients in developing and upgrading facilities. Duration : May 2019 to feb 2020 ( Project:- MOH, PDO ) Position : Instrument Engineer
Roles and Responsibilities:
MAIN Activities Design including Preparing Specification, Technical Evaluation, Handling Vendor Drawings review for,
DDC Control Panel
BMS & SCADA System Upgradation & Maintenance.
Periodic Service & maintenance.
Maintenance of field Instrumentation.
Globe Control Valves
Multi-Phase Flow meter (MPFM)
Multi Variable Flow Transmitters
Riser ESD Valve
Double Actuated Ball Valves
Instrument Air Compressor Package
Corrosion Inhibitor Packages
Part of Operational Engineering activities and involved all site support engineering activities. Previous Organization: Technocrats S.S Pvt.ltd
(Contract with Emerson )
Technocrats have been in the EPC/Pre-commissioning business which provides a full range of technical and project management skills, from design through procurement, construction, commissioning and start-up to assist clients in developing and upgrading facilities. Duration : ( July 2012 to Feb 2015) ( Project:- IOCL, BPCL, Biocon. Position : Instrument Engineer
Roles and Responsibilities:
Preparation of Total Instrument Package of deliverables for Well Hook up facilities including data sheets, Loop diagram, and Installation drawings.
Participates in reviews of Process Flow Diagrams and Piping and Instrument Diagrams.
Participates in the preparation of equipment lists, instrument index and process specifications for instruments.
FAT, executed test plans and preparation on IO lists for the same, and loop testing of DCS panel.
Participates in the preparation of Process Impulse line.
Erection Commissioning& Calibration of Field Instrumentation & Control (Control valve, Flow meters, Diaphragm Valve, actuator Valve, FF Segment, 848T RTD JBs.
Erection and commissioning of field instruments installation, including grounding and power distribution, supervision of subcontractor, customer Relations, contractors / vendors relation, reporting etc, Loop checking of field Instruments. field instruments Calibration with AMS Software Version 12.10.1
Personal Details:
NAME : Zainulabedin
DATE OF BIRTH : 06.05.1989
SEX : Male
MARITAL STATUS : Married
NATIONALITY : Indian
LANGUAGES KNOWN : English, Marathi, Hindi,
PASSPORT DETAILS : M1335441
EXPIRY DATE : 21/08/2024
DECLARATION:
I hereby declare that the information furnished above are true to the best of my knowledge and belief.
(Zainulabedin)
Contact this candidate