Consulting Engineer Petty Officer

John P. Remington, CPL

*** ******* **

Clayton, NC 27520

717-***-****(Cell)

EDUCATION:

U.S. Navy Technical Schools for Electricity, Electronics and Hydraulics - 1972 Bachelor of Science Degree - Agricultural Mechanization/Engineering - Penn State University - 1980 Certifications:Certified Professional Logistician (CPL) Society of Logistics Engineers (SOLE), 1984

EXPERIENCE:

SPECIFIC RELATED EXPERIENCE:

Time Critical Freight, Inc,Hanover, MD 9/96 – 4/99 Distribution Driver/Warehouse Associate (Part-Time evening shift) Picked and loaded (hand pallet jack and forklift) from warehouse packing orders various commercial products (consumer electronics, clothing/apparel, light duty industrial machinery) onto trucks for delivery throughout Maryland and Virginia, drove delivery vehicles (26’ straight body) and delivered all loaded products to assigned commercial destinations; duties involved: use of aforementioned pallet jacks and truck lift gate; daily receipt/accounting/delivery assignment documents for 2-3 tons of commercial products, vehicle fueling and maintenance and driver log maintenance; Metropolitan Transport, Inc,Gaithersburg, MD 9/94 – 4/96 Distribution Driver (Part-Time evening shift)

Loaded and distributed multiple bundle drops for Wall Street Journal (Silver Spring Plant) to commercial distribution sites and US Postal Service centers throughout central and southern Maryland and central Virginia, duties involved document receipt/accounting/delivery assignments for 2-3 thousand subscription accounts, vehicle fueling and maintenance and driver log maintenance; 1

John P. Remington, CPL

170 Norwich Dr

Clayton, NC 27520

717-***-****(Cell)

ADDITIONAL EXPERIENCE:

Northrop-Grumman Corp,Baltimore, MD 8/01 – 8/15

Principal Logistics Engineer - Consulting engineer for maintenance engineering analysis and planning functions for Department of Defense equipment;Tasks include: Generating and delivering Repair Level Analysis (RLA) summary reports using various software models(USAF-NRLA, USN-LORA, US ARMY-OSAMM), Logistic Support Analysis(LSA) per MIL-STD-1388-1A/2A, -2B with associated sub-tasks (i.e. - Reliability Centered Maintenance(RCM) Analysis, LSA Plans, Functional Requirements ID, Task Analysis, Supportability Assessment, etc.), Provisioning planning and documentation per MIL-STD-1388 and -1552, Technical Manual and Training documentation preparation, administration and presentation of formal Technical training courses for military personnel, Depot Repair Program management (proposal generation, customer interface, inventory control, production planning) and spare parts procurement proposal/bidding management. Managed shipment of company products to international locations

(freight forwarder liaison; Bills of Lading, inventory/warehouse management, US Customs regulations, etc.). Generated Logistics Support summary plans and reports for delivery to DoD customers. Hosted and presented at program review conferences the results of program tasks.

CDI Technical Services/Northrop-Grumman,Annapolis, MD 3/01 –8/01 Senior ILS/Reliability Engineer

Provided maintenance engineering analysis and planning functions for Department of Defense and Commercial equipment; products included Local Area Network (LAN) equipment (processors, servers, RAID Storage Devices, routers, KVM switches, monitors, cabling, etc.); responsible for connecting desktop computer components (keyboard, monitor, mouse, LAN & Power cords, etc.) for self and coworkers at various locations.

2

John P. Remington, CPL

170 Norwich Dr

Clayton, NC 27520

717-***-****(Cell)

Litton Advanced Systems, Inc,College Park, MD 4/99 – 3/01 Senior ILS/Reliability Engineer

Performed maintenance engineering analysis and planning functions for Department of Defense equipment; products included military avionics. Tasks include: Repair Level Analysis (RLA) summary reports using various software models(USAF-NRLA, USN-LORA, US ARMY-OSAMM), Logistic Support Analysis(LSA) per MIL-STD-1388-1A/2A, -2B with associated sub-tasks (i.e. - Reliability Centered Maintenance(RCM) Analysis, LSA Plans, Functional Requirements ID, Task Analysis, Supportability Assessment, etc.), Provisioning planning and documentation per MIL-STD-1388 and -1552, Technical Manual and Training documentation preparation, administration and presentation of formal Technical training courses for military personnel, Depot Repair Program management (proposal generation, customer interface, inventory control, production planning) and spare parts procurement proposal/bidding management. Orbital Sciences Corporation/Fairchild Defense,Germantown, MD 7/86 – 4/99 Program Manager - U.S. Navy F-14 reconnaissance system ECP Program Manager. Generated and submitted Engineering Change Proposal (ECP) Bid to Naval Air Systems Command comprised of SOW, CDRL Package, and Cost Volume. Established and maintained Work Breakdown Structures, Program Directives, Cost Accounts/Charge Numbers, Master and Detailed Program schedules, Earned Value Management System (EVMS) and Compliance matrices for overall Program administration. Managed overall Pgm cost control employing in-house Earned Value method and automated cost/schedule mgmt tools. Generated/submitted contractual Data Items(Pgm Status Report, Maintenance Plan, Spares Lists, etc.) in support of hardware delivery. Hosted/Conducted/Presented periodic Pgm Reviews (PDR/CDR, PMRs) with customer presenting overall Pgm status and direction. Supervised functional group lead personnel (Quality, Manufacturing, Engineering, Shipping, etc.) for performance/accountability on the Program. Held regular in-house status meetings to monitor and direct Engineering design efforts, Material selection/procurement and Manufacturing processes to deliver a First Article unit and 52 Production Units. Generated Logistics Support summary plans and reports for delivery to DoD customers. Hosted and presented at program review conferences the results of program tasks. 3

John P. Remington, CPL

170 Norwich Dr

Clayton, NC 27520

717-***-****(Cell)

Senior Logistics Administrator - Providing comprehensive Logistics engineering functions on a wide variety of military and commercial electronic/avionic systems. Tasks include: Repair Level Analysis (RLA) summary reports using various software models(USAF-NRLA, USN-LORA, US ARMY-OSAMM), Logistic Support Analysis(LSA) per MIL-STD-1388-1A/2A, -2B with associated sub-tasks (i.e. - Reliability Centered Maintenance(RCM) Analysis, LSA Plans, Functional Requirements ID, Task Analysis, Supportability Assessment, etc.), Provisioning planning and documentation per MIL-STD-1388 and -1552, Technical Manual and Training documentation preparation, administration and presentation of formal Technical training courses for military personnel, Depot Repair Program management (proposal generation, customer interface, inventory control, production planning) and spare parts procurement proposal/bidding management. Specific Military programs supported include: USN F/A-18, F-14, US ARMY Modem Test Set, and USAF F-16 Data Transfer Equipment. Generated Logistics Support summary plans and reports for delivery to DoD customers. Hosted and presented at program review conferences the results of program tasks.

Vitro Corporation,Silver Spring, MD 1985-1986

Logistics Engineer

Performed wide variety of maintenance engineering analysis and planning functions for Department of Defense and US Navy equipment. Duties included planning and generating maintenance reports and documents in support of various company equipment . AAI Corporation,Baltimore, MD 1983-1985

Logistics Support Analyst-Performed wide variety of maintenance engineering analysis and planning functions for US Army equipment; tasks involved analyzing company designs for Reliability and Maintainability applications for equipment supportability during its life-cycle. Generated Logistics Support summary plans and reports for delivery to DoD customers. Hosted and presented at program review conferences the results of program tasks. 4

John P. Remington, CPL

170 Norwich Dr

Clayton, NC 27520

717-***-****(Cell)

American Red Cross,Westminster, MD 4/10

–7/10

Customer Service Rep - Part-time evenings(some weekends) ; outbound “cold calling” to schedule blood donations with previous and new donors; discussed with potential donors specific health issues, blood types and attribute requirements the Red Cross was looking for Health Stream Research,Columbia, MD 4/06 –1/09

Sr. Customer Service Rep - Part-time evenings(some weekends) performing surveying services for various Healthcare Providers; duties involved outbound “cold calling” consumer opinion surveying and programmed surveying of hospital patients for customer satisfaction with services provided ( inpatient, outpatient, ER, etc.)

Wells Fargo Home Mortgage,Frederick, MD 8/02 –8/05 Sr. Customer Service Rep - Part-time evenings(some weekends) taking incoming and system generated calls; resolving homeowner questions involving a wide variety of mortgage related issues such as: receiving monthly pmts, setting up auto pmt programs, tax pmt’s, escrow accounts, delinquency issues, homeowners insurance, etc. Used fully automated software pgm’s to access, update and create customer accounts and records. Duties involved extensive use of MS Office products such as Excel, Power Point, Word, Outlook, etc. Completed several in-house training programs involving real estate taxes, mortgage regulations and oversight, loan origination processes and payment/interest calculation.

Home Depot Stores,Shady Grove, MD 2/92 –10/92

Sales Associate Rep (Part-Time evening shift)- Part-time evenings/weekends in Electrical Department assisting customers locate project materials, restocking shelves, performing inventory, etc.

5

John P. Remington, CPL

170 Norwich Dr

Clayton, NC 27520

717-***-****(Cell)

FINCOR-INCOM, York, PA 1980-1983

Production Logistics: Production Planner/Controller responsible for routing sales orders through the manufacturing and quality control departments. Created production Bills of Material from Engineering drawings; established inventory requirements and stockroom levels to support sales/manufacturing orders; determined necessary shop processes, routings, and capacity requirements to insure timely completion of orders received; maintained production and inventory control computer database for integration into Production Master Schedule; and expedited delinquent vendor Penn State Investigations,State College, PA 3/78

–6/80

Security Guard - Part-time security patrol on various locations (warehouses, apartment buildings, office buildings, etc.); duties involved physically and electronically monitoring and recording status of physical plant assets (warehouses, offices, perimeter boundaries, fire/safety equipment, etc.). US Navy 1972-1976

Guided Missile System Technician aboard USS Albany(CG-10) providing mechanical, electrical and hydraulic system maintenance for MK 12 Talos missile system. Duties involved performing operation and maintenance (scheduled and unscheduled) tasks for the missile system to include: disassemble/rebuild hydraulic accumulators, cylinders and lines; troubleshooting and replacement of electrical control components using schematics and basic test equipment (multimeters, etc.) such as relays, switches, electrical motors, junction boxes, etc. ; teardown and replacement of mechanical handling equipment involving conveyors, pulleys, winches, etc.; acted as planner for all scheduled maintenance tasks. Acted as Supply Petty Officer providing inventory and maintenance planning for missile system.

6

Contact this candidate