CURRICULUM VITAE

ENGR. AIJAZ AHMED SHAIKH (B.E ELECTRICAL)

MBA SPECIALIZED IN (GENERAL MANAGEMENT)

Email: adp0if@r.postjobfree.com

Mobile: 0092-300-***-****#334-***-**** (PAKISTAN)

Home: 009*-*********

Skype ID: shaikhaijaz1972

OBJECTIVE: - Apply for the Post of Transmission Engineer

CAREER HIGHLIGHTS

18 years' experience in different Companies in Pakistan and Having experience for lot of

rectifications, Testing & Commissioning, Operation & Maintenance and troubleshooting

of electrical problems in field, installations of electrical instruments, testing &

commissioning of substations equipment's Power transformers, Circuit breakers, C.Ts,

P.T.s, Cables& some Relays etc., measuring devices, home utility appliance supervisions

of many sites such as Substations experience mentioned as below.

AREAS OF EXPERTISE

Critical Path analysis Operational Management Project Management

Supervision Client Liaison & Health Leadership & safety

Working from drawings Manpower Planning / Scheduling

Inspection / Compliance Problem Solving Systems Control and Logistics Cost

Control Final Handovers Commissioning

Quality assurance Progress Reporting.

SENIOR TRANSMISSION ENGINEER

12/2009 TO PRESENT

HYDERABAD ELECTRIC SUPPLY COMPANY-(WAPDA) SINDH PAKISTAN

• Perform engineering work using intensive knowledge and experience in

evaluating, selecting, modifying, and applying standard techniques, procedures,

and criteria for projects of varying size and the highest complexity.

• Provides engineering/technical expertise and guidance in the identification, analysis

and resolution of routine problems in area of expertise. Assists in the

accomplishment of business goals and objectives through effective planning,

organizing, estimating, scheduling and monitoring of work activities under the

guidance of higher-level employees.

Activities

Activities shall include, but not be limited to, the following.

• Equipment specification, proposal evaluation and requisitioning

• Engineering calculations to assure safety and performance of equipment and

systems

• Selection and application of appropriate Engineering matters, equipment and

systems

• Interdisciplinary interface for constructability and conformance to project

requirements

• Preliminary design, budgetary estimating, and scheduling

• Detailed design, estimating, and scheduling

• Monitor construction schedules to ensure timely completion of the work

• Direct changes to the work when requested by the Project Engineer

• Carry out programs for the testing of materials, equipment, or plant systems at the

direction of the Project Engineer

• Aid in evaluation and approval of contractor's invoices

TRANSMISSION ENGINEER

07/2004 - 11/2008

QUETTA ELECTRIC SUPPLY (WAPDA) BALOCHISTAN PAKISTAN.

• Aid in receiving, inspection, and approval of equipment and materials

• Act as Project Engineer, when required, on projects of moderate to large size and

complexity

• Perform complex studies and economic analyses of engineering alternatives

• Prepare reports and feasibility studies for submission to Management

• Provide budget and schedule information to the Project Manager and Management

• Serve as Project Engineer on assigned projects

• Proficient with the Company's design, construction, QA/QC, and safety standards

and the Company document control system

• Proficient applying Standards, both National and Local. ANSI/IEEE, National Electric

Safety Code, ASTM, AIC.

• Promote complete and accurate record keeping and be responsible for the quality

of all work performed.

• Strong Planning/ organizing skills as well as making decisions on timely manner

• Strong written and communication skills and a proactive approach to daily tasks and

the ability to work in a highly pressured environment

• Database handling and Programming Skills

• Knowledge sharing in order to increase technical skills of other teams involved in

deployment and operations activities in the network

• Experience in HVDC.

• Communication Skills and ability to work under stress and strain/Pressure

environment.

• Ability to command subordinates

• Utilizing a Value Framework approach, calculate project risk scoring and

prioritization for submitted projects

Skills for Configuration Transmission Engineer.

• Develop scoping documents, project components; prepare technical specifications

and bid packages as required

• Technical support for new and retrofit projects. Review and approve mechanical/

electrical final drawings and release for manufacturing

• Attention to engineering details and project close out documents

• Work under pressure receiving a high volume of feeds

• ISO quality management including DOCS OPEN

• Analyze the system design, programming, and modification

• Conduct transmission analyses including load flow and verification of load flow

models

• Coordinate testing of generator protection system components

• Evaluation of Standard Definition and High Definition transmission signals using in-

house test equipment

Familiar with the following test equipment's

• TRANSFORMER OHM-METER (Make-MEGGER)

• DELTA 2000 FOR INSULATION POWER FACTOR TEST (make-MEGGER)

• TTR- Automated Transformer Turns Ratio Tester (Make- MEGGER)

• ODEN AT Primary Injection Test kit ( Make – GE Energy)

• SINGLE PHASE RELAY TESTER- SVERKER 760 (Make- GE Energy)

• THREE PHASE RELAY TESTER-FREJA 300 (Make- GE Energy)

• PRIMARY CURRENT INJECTION KIT – CPC 100 (Make-OMICRON)

• MICRO-OHM METER-MOM600A.

• DIGITAL LOW RESISTANCE OHM-METER-DLRO-10 (Make- Megger)

• CIRCUIT BREAKER TRIPPING/CLOSING KIT TM-1600

MAINTENANCE AND OPERATION OF 132KV TRANSMISSION LINE

• There are 3nos of 132kv Transmission Line are

• 152 Towers, line

• 344 Towers,, line

• 284 Towers, line

• PATROLLING OF 132 KV TRANSMISSION LINE FOR PREVENTIVE

MAINTENANACE

Follow the schedule of patrolling for the preventive maintenance before happening

of any major breakdown.

Due to heavy wind storm and twister effects the braces of tower become loose and

may be fallen some times. By the patrolling the Defects areas will be attend

immediately.

The following areas needs preventive measures of 132kv transmission lines.

• Loosen of Braces Earthling wire Lightning Surges

• Lightning Arresters: General

• Environmental Effects.

• Patrolling the 132KV Transmission Line as per scheduled program,

• Maintenance of Transmission Tower by taking Shutdown (PTW).

• Replacing the puncture and broken discs.

• Tighten the loose tower braces

• Tree trimming.

• Performed Maintenance and operation of 132 KV substations equipment like

circuit breakers, Isolators, Power Transformers, Batteries and Power cables.

• Performed control operations of 220/132 KV substations equipment like Circuit

breakers, Isolators, Earth Switches as per requirements of N.P.C.C. and SCADA.

• Arrange the Shutdowns to the work on Transmission Lines, Circuit breakers and

Power Transforms etc. To issue P.T.W on Transmission Lines, Power Transformers,

Circuit Breakers and Switchgear equipments for maintenance work.

To safe the Line parts and connects Temporary and permanent Earth switches

ensure with the equipments is safe to work.

JOB SAFETY AWARENESS AND SAFETY CODE

• Get safety awareness and follow the prescribed safety rules and

guidelines while on work for your own safety, of fellow workers and of the

company’s property.

It is the responsibility of the man-in-charge and of each crew member to

constantly be on the lookout for safety hazards and to take definite steps

to eliminate or control all identified hazards.

• IDENTIFY the Hazards.

• ELIMINATE the hazards wherever practical.

• CONTROL the hazards when they cannot be eliminated.

• PROTECT against injuries in case a hazard gets out of control.

• MINIMIZE the severity of an injury, if an accident occurs.

ROFESSIONAL TRAININGS:-

Course/Certificate Passing Institution

year/Duration

Junior Management Course 17-09-2018 to 16-11- WAPDA

2018 Administrative

(09 weeks) Secured Staff College

3RD Position with Islamabad

Remarks Best Pakistan.

communication,

Motivational and

Leadership Skills.

Sector Specific Training 12-03-2018 to 20-04- WAPDA

2018 Engineering

Academy

Faisalabad Pakistan

Maintenance of Grid Feb-2008 to April- T.S.G(Technical

Station(Crew Training) 2008 Services

(03 Months) Group)GSO

Training Centre

Terbella Pakistan

Integrated Induction 01-09-2003 to 11-10- WAPDA

Course for Newly Inducted 2003 Engineering

Junior Engineer(T&D) (06 Weeks). Academy

Faisalabad Pakistan

Integrated Induction 13-10-2003 to 22-11- WAPDA Staff

Course for Newly Inducted 2003 College Islamabad

Junior Pakistan.

Engineer(Management)

Information Technology 03-10-2011 to 07-10- Zabist Institute

2003 Hyderabad.

EDUCATION RECORD:-

• Passed in 1996 B.E (Electrical) from Mehran University of Engineering and

Technology Jamshoro (Sindh) Pakistan (1st Division).

• Passed MBA specialized in General Management. in 2016

• 1989-Intermediate (Pre Engineering) from B.I.S.E SUKKUR1st Division).

• 1987-Matric (Science) from B.I.S.E SUKKUR (1st Division).

COMPUTER SKILLS:

Good hand on, Ms Word, Ms Excel, Ms Power Point, Internet surfing.

Contact this candidate