Design Engineer

NOLY O. NAVARRO

Deira, Dubai, United Arab Emirates

Mobile No: +971-**-***-****

E-mail Address: ***************@*****.***

Visa Status: Employment Visa

OBJECTIVE To encourage knowledge and concern to the competitive field of engineering or any work field that will soon escalate my aptitude as an individual. To adopt new techniques and approaches to enhance my skills and effectiveness

WORK EXPERIENCE

Al Yousuf Elevators and Escalators

November 2017 – October 2021

PO Box 25 Al Barsha 1, Dubai, UAE

Position: Design Engineer/Draftsman

Prepares autocad drawing of elevators, escalators and moving walks (travelators) – Fujitec, Kleeman and Wells.

Prepares other drawings such as as-built, blow ups, proposals, for installation, scaffolding and for construction drawings.

Propose detailed design drawing (to general manager) showing the power, load capacity, speed estimation and type of elevator (machine room or machine room-less) according to the architectural drawing and manufacturer’s catalogue.

Coordinate all design drawings to the person/s working on a project (project engineer, sales, manager and general manager).

Projects:

oAC Domus Project: G+4P+18 Typical Floors Commercial & Residential Building at Jumeirah Village Centre, Dubai, UAE; 3 units Zexia Elevators with 150mpm speed; 23 stops - 800-P10 capacity (2 units) & 23 stops - 1050-P14 capacity (1 unit)

oBloom Tower-1: G+4P+29 Typical Floors Residential & Commercial Building at Jumeirah Village Centre, Dubai, UAE; 8 units Zexia Elevators with 180mpm speed and 33 stops; 1050-P14 capacity (4 units) and 800-P10 capacity (4 units)

oAl Andalus Masjid Project: G+1 Floor Building at Jumeirah Golf States, Dubai, UAE; 1 unit Rexia Elevator with 60mpm speed, 2 stops – 630-P8 capacity

oTown Square Project: G+P+8 Typical Floors Apartment Building at Plot No. 008 Dubai, UAE; 16 units Rexia Elevators; 105mpm speed 9 stops 1000-P13 capacity (7 units), 105mpm speed 9 stops 1350-P18 capacity (7 units), 60mpm speed 2 stops 1000-P13 capacity (2 units)

Dewan Architects+ Engineers

July 2015 – October 2017

Al Wasl Road,Villa 583 - Dubai, United Arab Emirates

Website: www.dewan-architects.com

Position: Office Engineer/Junior Electrical Inspector

Checking inspection requests for the work carried out by the contractor and ensuring that the contractor is complying with the approved shop drawing/s, authorities’ standard and project requirement.

Material delivery inspection according to material submittal and project requirement.

Raising site observation and non-conformity reports when contractor is not following the standards and requirement.

Submitting weekly and monthly progress report.

Provides technical and administrative information to the other engineers and inspectors working on a project to ensure that the work complies with all engineering standards, codes, specifications, and design instruction.

Coordinate all activities related to the document control procedure, including technical documents, drawings, and commercial correspondence.

Input document data into the standard registers such as excel transmittal log or proliance system ensuring that the information is accurate and up to date.

Typing of site documents, and follow up of all the site needs

Projects:

oUmm Suqeim Villas Development, Umm Suqeim Dubai, UAE

oCreative Nest Nursery at Plot No. 2633188 Al Mizhar, Dubai, UAE

oThe First Avenue Mall & Hotel at Plot No. 6742010, Al Hebaiah First Motor City, Dubai, UAE

oCayan Project, Motor City, Dubai, UAE

oFountain Views, Down Town, Dubai, UAE

oMaster Card Office Building: 3B+G+3 Office Building at Plot No. A009-004 Dubai Internet City, Dubai, UAE

International Elevator and Equipment, Inc (IEEI) / Mitsubishi Electric Inc.

October 2013 – April 2015

Km. 23 West Service Road, South Superhighway,

Cupang 1771 Muntinlupa City, Philippines

Website: www.ieei.com.ph

Position: Design Engineer/Technical Inspector

Autocad drawings of elevator, escalator and moving walks (whether it is for construction, installation, as-built, proposal and other blow-up drawings) – Mitsubishi

Power, load capacity and speed estimation for the specific type of elevator (machine room and machine room-less type).

Conduct and participate to technical and coordination meeting with the client and contractor/sub-contractor.

Conduct technical site inspections and prepares inspection reports.

Testing and commissioning of elevators.

Projects:

oThe Reef Project: 3 units Nexiez Machine-Room Elevator Series with 150mpm speed & 23 stops, 1350-P20 capacity (1 unit) & 750-P11 capacity (2 units)

oQ Plaza Commercial Center: 1-unit ZJ SE Series Escalator with 30mpm speed, 35 & 9000P/HR capacity

oCathy Uy Lim Building: 1 unit SED 200S Home Elevator Series with 20mpm speed & 3 stops

200-P3 capacity

oMango Tree Residence - West Tower: 7 units Nexies Machine-Room Elevator Series with 150mpm speed, 37 stops - 1150-P17 capacity (3 units) & 38 stops - 1150-P18 capacity (4 units)

oAyala - Avida Towers Davao - Tower 1&2: 6 units Nexiez Machine-Room Elevator Series with 150mpm speed, 23 stops - 1000-P15 capacity (3 units) & 24 stops - 1000-P15 capacity (3 units)

oLM Metro Hotel – Expansion: 1-unit Nexiez Machine-Roomless Elevator Series with 60mpm speed, 5 stops - 630-P8 capacity

o888 Lucky Mansion: 3 units Nexiez Machine-Room Elevator Series with 150mpm speed, 31 stops - 1000-15P capacity

Powerbox Solutions, Inc.

(Internship Training)

April 2012 – June 2012

Silang, Cavite, Philippines

Website: www.powerboxsolutions.com

Assembly, disassembly and inspection of panel boards, switchgears and spare parts

Delivery preparation of panel boards to the construction sites.

Autocad residential layouting, load scheduling and cost estimation.

Warehouse parts monitoring.

SKILLS

Technical knowledge in electrical designing and distribution as per UAE Regulation/Standards

oHigh rise building and residential electrical wiring design

oDifferent electrical services such as lighting, power, fire alarm and emergency lighting

oSymbols and legends.

oLux level calculation

oLoad distribution schedule (residential/high rise building); load calculations

oCables: selection, conductor, strands, core and insulation

oArmored and unarmored cables

oVoltage drop calculation

oTransformer selection concept as per DEWA regulation

oSwitch gears (circuit breakers) types and selection

oPanel boards (MDB, SMDB, FDB, FDB-services)

oShort circuit calculations

oCapacitor bank; power factor improvement

oBusbar details and selection for high rise building

oFire alarm system and emergency light system

oUPS selection

oSingle line diagram (SLD)

oEarthing according to the requirements

oLightning Arresters

o Green Building Design implementation

Ability to layout AutoCAD elevator and escalator plans (as built drawings, permit drawings, for construction, for installation and other blow-up drawings) – Fujitec, Kleeman, Wells and Mitsubishi

Ability to coordinate technical meetings with the clients regarding to the scope of work.

Conduct inspections concerning for the condition of the existing and under construction sites.

Technical knowledge in testing, commissioning of elevators.

Have knowledge in contract document of construction industry.

Knowledge in motor control and programmable logic controller.

Responsible, flexible, self-motivated, works with confidence and interest, a team player knowing how to work with due trust and respect to others.

Ability to effectively manage time and prioritize multiple responsibilities.

Computer Literate, have knowledge in Microsoft Office Software such as MS Word, Excel, Outlook and Power Point, Multisim, PLC Programming, C++ Programming, AutoCAD and Proliance software.

Ability to ensure the quality assurance/quality control of the work.

Ability to maintain good working relationship with all co-workers and the general public and to use good judgment in recognizing cope of authority.

SEMINARS/TRAININGS

Electrical Design 05th July 2019 - 9thAugust 2019

Arabian Info-Tech Training Institute LLC

Al Musalla Tower, Fahidi Dubai, UAE

Product Knowledge for Elevators and Escalators 24th-25th March 2015

International Elevator and Equipment, Inc. (IEEI) /

Mitsubishi Electric Inc.

Cupang Muntinlupa, Philippines

Elevator System and Features, Basic & Emergency 11th-12th February 2015

Operation & Door System for Elevators

International Elevator and Equipment, Inc. (IEEI) /

Mitsubishi Electric Inc.

Cupang Muntinlupa, Philippines

ACHIEVEMENT Registered Electrical Engineer

Professional Regulation Commission Board Passer - Philippines

PRC Registration No: 0052566

Dated September 24, 2013

EDUCATION Bachelor of Science in Electrical Engineering

Southern Luzon State University

Lucban, Quezon, Philippines

Date Graduated: Year 2013

PERSONAL DATA

Age: 29

Sex: Male

Civil Status: Single

Date of Birth: May 16, 1992

Place of Birth: Sariaya, Quezon, Philippines

Nationality: Filipino

Passport No.: P3777160B

Driving License: On-going

LANGUAGES English and Filipino

REFERENCES Available upon request

I hereby certify that the above information are true and correct to the best of my knowledge and belief.

NOLY O. NAVARRO

Contact this candidate