Post Job Free

Resume

Sign in

Electrical Power Engineer

Location:
Dubai, United Arab Emirates
Posted:
July 28, 2021

Contact this candidate

Resume:

Electrical Project Engineer(PMP Certified) with *+ years` experience in

Engineering and technical supporting, in conceptual and detail design, across large scale of Power plants/Oil & Gas and chemicals projects including Project Engineering Design office and site based roles from small skid mounted packages to large plants systems with international EPC companies. Education 2007 - 2012

Degree: Bachelor of Electrical Power & Machines Engineering. Location: Mansoura University, Mansoura, Egypt

Graduation Project: Fault analysis of Wind energy conversion system with grad (Excellent).

Work Experience

Project Description: Aweer Power Station Phase-IV (780 MW)

Contract value: $301 Million.

Consultant: Electricite de France (EDF).

Client: Dubai Electricity and Water Authority (DEWA).

Position: Electrical Project Engineer at ELSEWEDY Power S.A.E- Dubai Branch and Siemens Consortium at Dubai, UAE.

Project Experience and Responsibilities:

- Responsible for the management of the Electrical packages, reporting to Project Manager and Electrical Package manager.

- Responsible for Technical and Commercial Coordination for Electrical Suppliers and Sub-contractors.

- Utilize management skills in the following key areas: Project and Programmed Management, Preparation of estimates & proposals, Project coordination, Project schedule monitoring, control and analysis, planning for quality deliverables, Team building, Relationship management, Quality management, Performance reporting, Project change control, Overall delivery of projects, Commercial awareness, and Interface/communication management

- Reviewed vendor documentation, Procedures, ITP’s, MDR’s and other QC documents to assure compliance with the project specification and requirements.

- Interfaced with other disciplines during project execution. Answered Technical Queries which are the result of Nonconformities in project Design & construction.

- Experienced in using international regulations, codes and IEC standards and involved in HAZOP Study of Plant.

- Administration of Purchase Orders from all aspects commercially, technically and contractually.

- Handling official correspondences from/to client, suppliers and sub-contractors related to Electrical scope.

Personal Details

Address: Dubai Silicon Oasis, UAE

Nationality : Egyptian

D.O.B : 01- May -1990

Marital Status: Married (1 Kid)

Driving license: UAE- Egypt

Mobile: (UAE) +971*********

E-Mail: adnxsv@r.postjobfree.com

Linked-In: linkedin.com/Mohamed Elgebaly

Skill Highlights

Project Management –PMP Certified

Strong decision maker

Complex problem solver

Creative design

Innovative

Local Authorities Technical & Commercial

liaising- DEWA/DM/DUSUP Approval.

Member of Egypt /UAE Syndicate of

Engineers.

Languages

Arabic - Mother Tongue

English - Fluent French - Fair

Software Skill

Auto-CAD & DAILUX Software.

SAP ERP System.

Revit MEP software.

Professional in MS Office.

Basis of Oracle Primavera P6.

DEWA /DM/RTA/DU/Etisalat/DUSUP and

other local authorities Portals for NOC/PTW

requirements.

Mohamed Elsayed El-Gebaly PMP®

March-2018 – Present

Page 1 of 3

- Preparation of the requests for quotation for the mechanical erection and commissioning scopes. In addition, the coordination between different disciplines.

- Preparation of cost estimation reports for the mechanical scope in addition to the basis of estimates for the claims and saving cases throughout the supply and erection processes.

- Maintaining the projects schedule and cost within allowable variance margins throughout the project.

- Preparation of work packages assignments and development of work flow charts for the assigned resources on work packages.

- Reviewing the prequalification of different suppliers and sub-contractors throughout the project.

- Claims chronologies preparation and submission.

- Invoices verification for mechanical suppliers and sub-contractors.

- Responsible for the invoicing plan and invoicing submission for the whole project scope.

- Preparation of the risk management plan for the mechanical scope.

- Experience encompasses developing project scope, specs, Front End Engineering & Design (FEED), Detail Engineering projects, applying value engineering, preparing tenders SOW, per-forming bid evaluation, contracts negotiation, multi disciplines design reviews & inter- face coordination, developing detail design, reviewing claims, factory testing, and developing engineering standards and procedures.

- Effectively ensure the implementation of internal quality assurance procedures.

- Handling Packages as technical and commercial coordination with local governmental authorities (DEWA –DM-RTA-DUSUP-DCD…etc.) thru the required NOC/PTWs.

- Manage, coordinate and provide technical support to the design team ensuring safe and successful completion of project related engineering activities according to specification, budget, schedule, quality, standard codes and Company procedures and practices. Facilitating progress meetings and reporting etc.

Projects Description: Infrastructure works for H.V (132KV & 11KV) and L.V Cable installation works

& DEWA 132Kv S/S installation and Location: DUBAI, UAE.

Contracts value: 273 Million AED Clients: DEWA –RTA-DM- DAMAC- NAFFCO. List of Completed Projects:

- Cable Installation for Naffco Flow Control Fzco at Jafza Area (11KV Cable installation QTY=21km).

- Cable Installation for AKOYA PARK with DAMAC at Al Hebiah 3rd (132KV/ 11KV Cable installation QTY=52km).

- Cable Installation for AKOYA PARK with DAMAC at Al Hebiah 3rd (LV Cable installation and Feeder Pillars Installation for group of 993 villas).

- DEWA 132Kv substation Electrical installation works (MUDONDXB) at AKOYA Park.

Position: Electrical Projects Engineer at GULF SANDS Contracting L.L.C at Dubai, UAE. Projects Experience and Responsibilities:

- Responsible for preparing Quotations Electrical of Cable installation Projects and Electrical installation of 132KV S/S works.

- Involving in the Tender stage to finalize the project and reporting directly to project manager and COO.

- Complete study of the contract documents of the awarded projects.

- Reviewing Design Drawing and shop drawing and Expedite the Approval of Shop drawings, Material Submittals and Method of Statements and Risk assessment (MSRA) from Engineer / Client / DEWA / RTA.

- Procurement of the materials based on the Material and Shop drawing approvals upon requirements.

- Obtain the authority NOCs from Authorities.

- Complete planning of the project in line with the project milestones.

- Site facilitation and Commencement of site works by providing necessary resources to the Site Engineers.

- Monitor all the Electrical works at site like (Trial Pits – Excavation – Cable Laying – Red Sand –Backfilling – F.O/SCADA Cables installation – Commissioning and Test –Termination – Shutdown Works - Final Clearance) according DEWA Procedures, installation of Feeder Pillars and termination.

- Coordination with Authorities (DEWA / RTA / DM / Military / Etisalat / DU) as Electrical Engineer Approved from DEWA for HV & LV works for the commissioning works and permissions.

- Maintaining and monitoring a good documentation system in the site level and office level.

- Notification of delays, extension claims and other correspondences. Coordinate with the Main Contractor/Engineer/Client and update the status on a regular basis. Attend the meetings and clear the raised issues on time.

- Update the project status to the superior (Managing Director) and advise the management for the actions to be taken to improve the work productivity.

- Payment Certifications and Invoices with DEWA & Clients.

- Prepare complete project report with feedback to the management and Closing the Project.

- Directly monitor and manage all the Site staffs, resources and subcontractors for different sites. Conduct meetings to improve the works quality.

- Coordination with the Main Contractor, other contractors, Consultants, Clients, Authorities, Suppliers, Manufactures and Subcontractors.

- Coordination with the Procurement team, Quantity Surveyor, Estimation Department. DEC-2016 to March 2018

Page 2 of 3

Project description: Electrical installation works of 1020 Villas and Commercial high riser buildings of EMAAR MIVIDA project.

Location: Cairo, Egypt.

Position: Electrical Site & Technical Office Engineer in Redcon Co. Construction and Responsibilities as the following:

- Preparing Electrical Design Drawings using AUTOCAD software and Shop Drawing of Mivida villas & Commercial building of Mivida and Mosque of Mivida (Lighting, Power, Fire alarm, Data, Telephone, Electrical panels) .

- Preparing submittal of material (procurement department) which will be used in project.

- Make all drawing (approved drawings + as build drawings) for all systems.

- Electrical installations for all systems Lighting, Power, Fire alarm, Data, Telephone,

- Electrical panels, Distribution network (embedded and exposed conduits) and Cable tray installations.

- Coordinator between the electrical and mechanical systems and Cables pulling.

- Electrical installation of layout external works (MV&LV cables, Manholes, Duct bank, MV joint, Street lighting).

- Electrical installation of earthing system for (Switch-gears, RMU, Transformer, MDB). Project/ Roles description:

Shift In charge Engineer for Existing Power Plant –Steam turbine for El-Nasr Co. For Intermediate Chemicals at Al Fayoum – Egypt during Egyptian Army Services Duty.

- Prepares and reviews the equipment SOPs and LOTO procedures.

- Ensures Operation Department Standard Operating Procedures are followed in Plant operations

- Ensures all the plant emergency and protection equipment is available.

- Reports the deviations to the Team Leader and the Maintenance personnel for immediate rectification.

- Ensures equipment isolation and normalization are carried out per the requirement following proper Safety Permit (PTW) or LC or CO and LOTO procedures.

- Responsible to oversee all start-up, shutdown, and emergency operations as per the stipulated procedures.

- Analyze plant operating problems and coordinates solutions with shift group, other operating Shifts, and Maintenance Departments without compromising safety, and with the least impact on plant availability and reliability.

- Responsible of all spare parts we need in the power station

- Responsible of writing reports and documents about any changes in electrical system.

- Determine the required maintenance operations in the power station.

- Electrical Engineer for electrical Installation works of Power station 15 MW (Steam Turbine) With FINCANTIERI & E.C.C Engineering Consulting & construction.

Certifications and Training Courses

PMP “Project Management Professional “Certificate. MBA on going…

Basis of Programmable logical control (PLC) and IEC standards.

Some courses from Electric Schneider University (Electrical Concepts, Steam Systems Advantages and Basics of Steam - Power Distribution I, II and III, Respond to the Request Smart Grid - Power factor and harmonics).

Industrial PLC Basic Applications & Industrial HMI Advanced Application ( Courses )

Maintenance & Troubleshooting of industrial Control Systems( Courses )

Electrical Installation in Industrial, Commercial and Residential Buildings Using Auto-CAD ( Courses )

Electrical Q.C Engineer in ThyssenKrupp Xervon Egypt in TCI Sanmar Petrochemicals plant. ( Summer Training ) References

• https://graduates.mans.edu.eg/– ID 14449304 Mansoura University database.

• Mrs. Adelaide Diaz: Project Manager - A of Al Aweer Power station Phase-IV

• Mr. Islam Nashaat: Project Manager - B of Al Aweer Power station Phase-IV

• Other references are available upon request.

AUG 2015 to NOV 2016

JULY 2012 to JULY 2015

Page 3 of 3



Contact this candidate