RESUME

MURUGAN.K

Contact No. : +91-811******* (India)

E-mail : adnpbu@r.postjobfree.com

Personal Data

Date of Birth : 03.06.1986

Nationality : Indian

Gender : Male

Languages Known : Tamil, English and Hindi

Marital Status : Married

Place of birth : Tamil nadu, India.

Career Objective:

With an experience in the field of Testing & Commissioning/Site Co ordination, Secondary Design Work for HV GIS, Switchyard, Transformers, Protection in various Substations, Power plants & Industries. I look forward for an opportunity to display my skills in the field of Electrical projects, Power Plants, Oil & Gas plants. Educational Qualifications:

Bachelor of Electrical and Electronics Engineering 2007, Anna University. Experience Profile:

12+ Years experience in the field of Electrical Engineering.

Oct 2013 to Sep 2020 I worked as a Electrical Engineer/ Design Engineer in HYOSUNG CORPORATION, Qatar.

5 Years (2008 2013), I worked as a Testing & Commissioning Engineer in VOLTECH ENGINEERING SERVICES, India/Qatar.

1 month (2011), I worked in Kuwait, LIVE substation Protection modification work through VOLTECH ENGINEERING SERVICES, Kuwait.

Professional Skills:

Review of Single line diagram, Control & Protection Schemes.

Review of Document Transmittal Sheet (DTS), Design Specifications.

Modification of GIS/LCC Scheme using AutoCAD file based on Consultant/Client requirement.

Preparation of GIS/LCC Panel, As built drawing using AutoCAD file based on site Red mark up drawing.

Interfacing schemes checks between GIS, Control and Protection Schemes updating in AutoCAD file for further site work.

Cable Schedule and termination schedule review for GIS, Switch gear, Transformers, Protection and other common alarm devices.

Reviewing revised Protection relay setting calculation and updation for further Client approval.

LV System Single Line Diagram, As built using AutoCAD File based on Red mark up drawing.

SAT Format preparation for Switch gear, GIS, Protection panel, Transformer and SCS Documents.

Method of Statement preparation for GIS and Control panel scheme modification.

Project execution and co ordination with client and contractor.

Site Supervision & inspection for electrical activities.

Control and Protection Scheme modifications review as per customer requirements.

Operation and maintenance of GIS, Power transformers, Motors & Protection relays.

Testing and commissioning of Substations up to 400kV & Power plants up to 500MW and various industries.

Testing and commissioning of Switch yard Circuit Breaker, Power/Distribution Transformers, Isolator (Disconnector), CT, VT & CVT up to 400kV, Motors up to 3000kW, Cable & Bus bar HV test.

Testing of Back up OC & EF relays, Bay Control unit and Auxiliary Relays.

Stability Test, Protection relays End to End test and Signal checks up to control Center.

Trouble shooting of Switchyard, Switchgear, GIS, Transformer, Control and protection panel faults.

Kahramaa Live Station Modification work. Additional project works.

Holding Substation and Protection LOA for Kahramaa Live substation work (Qatar).

Having Qatar Driving License and Valid Electrical Engineer Visa until Oct 2021. Overseas Experience: (Qatar) KAHRAMAA PROJECTS

i) PROJECT : 66/11kV Lusail projects (Lusail Wadi 1 & 2, Lusail West 1 & 2, Lusail North & Qetaifan Island South), Ph11, PH13 Al saad 2. COMPANY : HYOSUNG CORPORATION (2018 –2020)

GIS Installation, Modification & Rectification Co ordination activities

66kV GIS Gas vacuuming and Gas filling work.

66kV GIS installation supporting work, GIS testing work, CB, DS/ES operation checks

& modification work.

66kV GIS HV Test bushing installation and testing work.

GIS/LCC Drawing Design work & Co ordination activities

66kV HYOSUNG GIS/LCC drawing modification work in AutoCAD file based on Kahramaa Specification.

Reviewing of GIS/LCC Drawing and Updates in AutoCAD file for consultant DTS approval.

Revised drawing submission to Consultant and Client for further site work.

Interfacing Schemes between control and protection panel modified in as per site requirement.

Termination details verification between GIS, Control panel and Protection panel schemes.

GIS Cable Schedule/Termination schedule (Excel File) preparation and submission to consultant/Client for approval and Site work.

ii) PROJECT : 66/11kV Semaisima S/S, Al khore S/S, 132kV AL Jiffara S/S, Merhab S/S, PH9 Hyosung Projects. (As built Drawing work)

COMPANY : HYOSUNG CORPORATION (2018 –2020)

GIS Drawing Design & As Built work

66kV GIS/LCC drawing As Built in AutoCAD file based on site Red Mark up Drawing.

As Built Drawing submission to Client for further approval.

As built GIS/LCC Cable Schedule/Termination schedule submission to Client for further approval.

As built protection drawing review and interfacing scheme verification for Client submission.

iii) PROJECT : 220kV/66/11kV Abu Hamur Super S/S, Ain Khalid Super S/S, Naeeja Super S/S, New Doha B Super S/S & 66/11kV Ain Khalid North, Al Wadi West, ISF Camp North & ISF Camp South. CONSULTANT : Lahmeyer International

COMPANY : HYOSUNG CORPORATION (PH10) (2013 –2018)

Over all Testing & Commissioning Co ordination activities

220kV & 66kV HYOSUNG GIS

200MVA & 40MVA HYOSUNG Transformer

11kV Schneider Switchgear

11kV ABB Switchgear

1500kVA Aux Transformer, LV Systems

Control Panel, Protection Panel & SCS systems.

Secondary design like protection relay setting calculation, CT sizing calculation work.

Protection scheme verification and modification depends on customer specification.

220kV GIS HV Test Bushing installation and testing work. iv) PROJECT : Testing and commissioning of 132kV & 66/11kV Gharafa North, Bin Mahmood, MOI & UAG, Al Wajbah South, PSS3, DIC & F, Al Kissa West, Abu Sidra, Vegetable Market S/S.

CONSULTANT : Lahmeyer International

CLIENT : SIEMENS WLL (PH10) (2012 2013).

PH10 Siemens Substation Electrical Design Works.

132kV, 66kV & 11kV Control and Power Cable Schedule and Termination Schedule Preparation.

132kV, 66kV & 11kV Scheme drawings checks.

Method of statement preparation for Control & Protection Panel Modification.

132/66/11kV Switch gear, Relay Panel, GIS & Transformer testing SAT format preparation

Site Co Ordination & Commissioning activities.

iv) PROJECT : Testing and commissioning of 66/11KV Umm Guwailina, Old Ghanim, Khalifat S/S.

CONSULTANT : ENERGOPROJEKT ENTEL

CLIENT : SIEMENS WLL (PH9) (2011 2012).

Testing and Commissioning Activities.

Low Voltage AC System: (0.415 kV)

Testing of Air Circuit Breakers, Current Transformers, Bus bar, Ammeter & Voltmeter.

Auto change over & Momentary parallel scheme checks. Power Transformer & Aux Transformer:

Transformer testing carried out by using CPC100 kit.

OTI & WTI Calibration test.

Transformer mechanical protection checks.

Fan Cooling Control checks.

Testing of TAPCON relay, RTCC parallel operation Scheme Check. High Voltage System: (66kV GIS & 11kV SWGR):

CT, VT, SF6 Breaker, VCB Breaker, Bus bar & Earth switch test.

High voltage & PD sensor test.

AC/DC Circuit checks, Change over circuit checks.

Trip circuit supervision checks & Trip coil current measurement.

Binary input verifications checks at BCU and Protection Relays

Interlock checks, Synch circuit checks.

CT & VT Primary Injection, Secondary injection test.

Trip logic test, Breaker Failure scheme checks.

High Impedance & low Impedance Bus bar Stability, Transformer Stability, REF Stability.

Backup O/C & E/F (7SJ802, Argus, 6MD6, 7SJ) relay test

66kV DGCC signal check, 11kV DCC signal check.

Protection End to End Test & Over all stability test. vi) PROJECT : Testing and commissioning of 220/66/11kV AL Bahraha Super S/S CONSULTANT : Lahmeyer International

CLIENT : AREVA T&D LTD (PSE) (PH8) (2009 2010).

Testing and Commissioning Activities.

220kV LCC panel under voltage relay, Ammeter, Voltmeter Calibration.

220kV & 66kV LCC Scheme and Operational check, BCU signal through.

220kV& 66kV CT, VT Testing & Sec injection checks.

220kV& 66kV interlock scheme check.

200MVA Transformer Cooling system and mechanical protection checked. Overseas Experience: (Kuwait)-(2011-One Month)

vi) PROJECT : Watchdog contact modification at live substation 400/275KV AL ZOUR SUBSTATION.

CUSTOMER : GCCI (2011)

CLIENT : AREVA T&D LTD.

Modification works at live substation

Watchdog contact wiring modified Between PROTECTION RELAY to BCU.

The relays like P543, P132, P633, P544, P442, P443, P142, P821, P122 and BCU C264.

P633, P132, P634 output contact is configured for watchdog purpose by using Micom S1 studio.

Domestic Experience: (India) - (2008-2009)

Testing and Commissioning work executed successfully are briefed below. 1. L&T LTD, 400/220kV GIS, Power Grid, Maharani Baugh, New Delhi. 2. L&T LTD, 220/66kV GIS, BSES Rajdhani power LTD, Ridge Valley, New Delhi.

Hyosung make

400kV & 220kV GIS CT & VT Testing, Primary & Secondary Injection.

400kV & 220 kV Control & Protection Panel Scheme check, BCU signal checks.

400kV & 220kV GIS Interlock scheme check.

500MVA Power Transformer Testing.

400kV GIS BUS BAR Stability, 500MVA Transformer Stability.

150MVA Transformer Mechanical protections and cooling systems are check.

66kV Cable Hi Voltage Test

3. ABB LTD, 220/27.5KV RSS Substation, Delhi Metro Railway Corporation(DMRC) Jahangir puri, New Delhi.

27.5KV Cable Hi pot tested.

4. ABB LTD, 11KV Substation, DMRC, Yamuna bank, Akshardham, Mayurvihar PH 1, PH 2, Ashok Nagar, Mundka station, New Delhi.

ABB make.

2.5MVA Transformer and CT, PT, SF6 Breaker tested.

SCADA Co ordination.

11kV Cable Hi pot test between station to station.

Battery Charger Panel Scheme Checks.

1MVA Dry Type Transformer Test.

ASS 2&3 in Udyog Bhavan, Race course road.

5. ABB LTD, 33kV GIS, GGSR, Badhinda, Punjab.

Hi voltage test for GIS bus bar.

Bay to Bay Contact resistance check.

6. ABB LTD, 132/11KV MOBILE SUBSTATION, HARYANA, HVNPL.

Transformer testing, Transformer differential stability, HV & LV REF stability.

Core Balance CT Stability.

7. ABB LTD, 2*600MW Rajiv Gandhi Thermal Power Plant, Hisar, Haryana.

11KV Cable Hi Voltage test.

2.5 MVA Transformer Test.

8. ABB LTD, 11KV Switchgear, Adithya Cement Plant, Chittorgaurh, Rajasthan.

ABB Make 415V MCC panels.

ABB Make 11KV rating indoor CTs, PTs, Circuit Breakers, relays.

2 To 5 MVA LT Distributions, VFD, VSD transformers.

11kV XLPE Cables with HI Voltage test.

3kW to 300kW motors of 415Vrating, 2000 & 3000 kW motors of 11kV ratings.

415V motors DCS control scheme Checks.

15MW Generator Stability Test.

9. ABB LTD, 132/33kV Substation, Maharastra State Electricity Transmission Corporation LTD (MSETCL), Karanja, Maharastra.

10. ABB LTD, 13MW (132/11kV) BIO Mass Power Plant, Gaps Power Infrastructure LTD. Aurangabad, Maharastra.

11. ABB LTD, 20 MW (132/11kV) BIO Mass Power Plant, IND Bharath Energis PVT LTD. Mukhed, Maharastra.

132/33kV Switchyard and Switchgear Equipments like

132KV ABB make SF6 Circuit Breakers, Current and Potential Transformers, Isolators Testing and Scheme checks.

Voltamp make 25MVA Transformers test.

11/0.415kV Distribution transformers test.

Voltamp make 15MVA (132/11kV) Transformer Test, Tx Differential, Switch and Restricted Earth fault Stability checks.

Hi pot test for cables and bus bar.

2KW to 300kW motors of 415V rating.

Earth resistance test done.

12. ABB LTD, 220/66/11 kV Substation, KPTCL, Ram nagram, Bangalore.

ABB Make

100MVA T/F, Incomer, 66kV Outgoing Panel Scheme Checks.

220/66KV Current Transformers and Capacitive voltage Transformers, Isolators and SF6 Breakers scheme checks.

13. Janani Enterprices, 400KV NTPC, Dadri, Uttar Pradesh.

45/36 MVA Unit Transformer test.

200 MVA 1PH Generator transformer test.

14. SIEMENS LTD, Bayer Material Science Company, Greater NOIDA, Uttar Pradesh.

415V LT Panel CT, Breaker, Control circuits, Digital Meters are tested.

Earth resistance test was done.

Breaker tripping checked by primary injection.

15. AREVA T&D INDIA LTD, 400/220kV Substation, Power Grid Corporation of India Ltd (PGCIL), Raipur, Chhattisgarh.

AREVA make

400kV CT, CVT, Breakers and Isolators Testing and Scheme Checks.

400kV Interlocking scheme check.

Bus bar stability and Reactor differential stability, Reactor REF stability tests. 16. AREVA T&D INDIA LTD, 400kV, 1*500MW Super Thermal Power Plant, NTPC, Korba, Chhattisgarh.

BHEL make

50MVA Transformer tested and Transformer protection functional checks.

AREVA make

CT, CVT, CB, Isolators Testing and Scheme Checks

Interlocking between existing bay and new bay checked. 17. SIEMENS LIMITED, 110/6.9kV Switchgear, RAMCO Cement Plant, Ariyalur, Tamil nadu.

AREVA make 6.9 kV Switchgear with CTs, PTs, Circuit breakers.

6.9KV XLPE cables with Hi pot test.

Testing Experience in Relays:

ABB make

Numerical relays like SPAJ 140C for O/C & E/F protection.

REU 610 O/V & U/V Protection relays.

REX 521 Directional O/C & E/F Protection relays.

Master Trip relay, Auxiliary relays.

AREVA make

P127, P122, P141 O/C & E/F Relays.

Master Trip relay and Auxiliary relays.

L&T make

MC 61A O/C & E/F Protection relay.

MV 12 over voltage & under voltage relay.

SIEMENS make

7SJ802, Argus O/C & E/F Relay.

Solkar Pilot wire differential Relay.

7SJ632, 6MD664, 7SJ647, 6MD61 Bay Control unit Relay.

7SJ6112 O/C & E/F Relay.

7PG17 master trip Aux Relay, 7PG153 TCS Aux Relay. Experience with Testing & Measuring Kit:

Secondary Injection Kit Omicron CMC 356/256/256+

Current Transformer Testing Omicron CT Analyzer

Omicron CPC100 with Booster/ Freja300/ Doble kit

Megger (5kV) Analog/Digital/ HV Test kit (AC/DC)

Contact Resistance Meter Megger

Circuit Breaker Timing Kit – Egil & Megger

Primary Injection Kit ODEN/ODEN A

Transformer Turns Ratio Kit Megger / Auto Transformer(Variac)

Loading Transformer kit

Mini Clamp meter, Digital Multi meter, Galvano Meter DECLARATION:

I declare that the information/particulars here in above furnished by me are true and correct, to the best of my knowledge and belief that it conceals no material fact. I further declare that any errors or suppression of facts in respect of matters stated above shall make me liable for dismissal from service.

Yours sincerely,

Date:

Place: (Murugan.K)

Contact this candidate