Page *

Muammer Arazi P.Eng

*** ************* **** **** **-702

Mississauga, Ontario L5B 4P9

Home: Cell:647-***-****

adnj6t@r.postjobfree.com

OBJECTIVE STATEMENT :

I am an adaptable professional ready to demonstrate technical abilities, with more than 25 yrs. experience in Hydro utilities power substation design. I have been working on Canadian industrial, oil & gas,and commercial projects. I have proven skills in professional engineering, design, construction supervision and management. I used computer extensively in my work.

EDUCATION

B.Sc. Electrical Engineering METU ( Technical University), Ankara, Turkey. MEMBERSHIP

1-Professional Engineers of Ontario (PEO)-Ontario-2005 2-Professional Engineers of BC (APEG)-Vancouver-2009 3-Professional Engineers of Alberta (APEGGA)-Edmonton-2011 4-Professional Engineers of PEI-2013

HIGHLIGHTS AND QUALIFICATIONS

Responsible for the substation design, Electrical power supply and protection design

(4,16KV,6.3KV,15KV,34.5KV,115kv and 240KV): Use Auto-CAD and Micro-station software. Solar and Wind project applications Single Line Diagrams, Plan Drawings for Grounding, Lighting and similar during a design/development phase; we improve the projects ( based on CSA – Canadian Standards Association, CEC – Canadian Electrical Code, and other Rules and Regulations)

Managed and supervised a protection coordination study drawings use software like ETAP- EDSA to coordinate protection trip of breakers, and static load circuits with upstream feeding circuits, which includes Line, Transformer, Bus-bar, Generator, Motor and Load Protections.

Implemented all time Quality Assurance and Quality/Project Control mechanisms to maintain compliance with procedures and instructions.

Cable list and calculations, Cable trays – where NEC and CEC are not fully accorded ( cable spacing inside cable trays are checked for full load currents, VD’s are calculated, and other influent factors are analyzed)

Worked on the Project Design on upgrading of Single Line Diagrams, Substations, Switchgears, creating Data Sheets (Power Transformers, Breakers, Gen-Sets, MV/LV Motors, etc.), reviewing Technical Vendor Submittals ( Squad Checks), developing Bid Tabulations and Page 2

MRO - Material Requisition Lists, QC Quality control reviewing all in compliance with company and project instructions.

Worked on the Electrical Calculations, Grounding Calculations, Cable Sizing, static loads/feeders, transformers, gen-sets, sizing of breakers /fuses as part of coordination study, VD – voltage drops, total weight calculation ( info for structural engineers) etc. Worked on MCC’s – motor control centers, electrical installation drawings – layout drawings, plan drawings, details, schematics etc.

WORK EXPERIENCE

Recent–-2019 Sr. Electrical Engineer METSCO /CIMA+ Mississauga, ON. www.metsco.ca Sudbury Hydro Projects: l upgrade drawings and resize the substation equipment. We design for 2x7.5 MVA Power transformers 44kV/13.8 Kv all other equipment.I made. calculations for Station Service transformer AC-DC system upgrade battery chargers sizing based on IEEE standards. New SLD and layouts are issued, and approved -stamped. Hamilton Data Centre project 10MW. Load calculations, cable sizing. SLD and General Layout drawings issued for proposal.

Land Fill Niagara Falls: 5000kva Transformer and Switch-gears design and calculations Recent–-2016 Professor at HUMBER/MOHAWK COLLEGE, Toronto,ON. www.Humber.ca Industrial Electronics I. Introduction to semiconductor Physics Electronic components and symbols, logic analysis. Introduction to Power electrical theory. Logic systems PCM Circuitry Robotics and industrial controls applications Industrial Electronics II SCR Rectifiers,Thermocouples, Transistor sensors. Heat Tracing and motion control .Logic analysis system control filo sand components. Wiring instrumentation and remote control industrial systems .Measurement during process.

Power Systems I. Introduction to Power systems Technology AD-DC Systems, Transmission lines Electrical drawings and Symbols. Power Systems II. Power Systems Analysis, Transient systems, Matrix analysis Technology AD-DC Systems drawings and Symbols. Load Analysis Canadian Electrical Code I. Administration and Inspection,permit requirements. Electrical systems cable size calculations grounding protection and control. Hazardous Area classification, WHIMS. Electrical safety and Arc fault protection.PPE equipment and personnel safety tools.

Page 3

2009-2016 Sr. Electrical Engineer, S&C ELECTRIC Canada, Toronto,ON. www.sandc.com Wind project Halkirk,Alberta 150MW :Senior electrical engineer licensed in province and design and check project drawings and studies,sizing and material equipment approval testing and commissioning at the site. 1MW Battery Storage unit project .Biggest in Canada,Installation site engineer for BC Hydro at site in Field, British Colombia.

2X12 MVA RBC Data centers project Lead site engineer in Stratford and Guelph,Ontario

Gosfield Wind Farm project 55 MW. Approved and stamped power drawings reviewed . Reported to project management and coordination with HYDRO-One. Kingston Solar project 100 MW. BOM prepared layout drawings reviewed and modified according to ESA comments and send to client project management and stamped.

2006 – 2009 Sr. Electrical Engineer, Bantrel Inc., Toronto and Edmonton www.bantrel.com Shell AOSP Downstream Expansion Project HMU, Fort Saskatchewan., Alberta. Electrical Design Engineer for EHT works for the multi-billion dollar project. Performed EHT calculations, prepared and reviewed EHT isometrics.

Reliance Industries Limited, Jamnagar Export Refinery Project, Jamnagar, India. Electrical Design Engineer for a multi-billion dollar upgrade of the refinery including detailed design of power supply, lighting, and small power systems. Performed grounding calculations, updated cable list, tray layout drawings, protective relay setting tables and layout coordination. 2004 – 2006 Sr.Electrical Engineer,QUADAUTOMATION INC.Toronto, ON www.quadeng.com

Republic Engineered Products, Steel Project, Ohio, USA. Senior Design Engineer for main power supply systems for caster, arc furnace and degasser. Also provided AC/DC drive sizing. Alta Steel Power Supply, Mill and Transportation Project, Edmonton, AB. Senior Design Engineer responsible for power supply systems for mill and transportation area. Prepared equipment specifications, bill of material and cost estimates. Algoma Steel, Kingston, ON. Design Engineer responsible for power supply and control system application for new lance device.

2003-2004 Sr. Electrical Designer, Linemen’s Testing Laboratories, Toronto, ON Stackpole Ltd., Power Supply System Project, Mississauga, ON. Senior Designer responsible for the design of 2 x 5 MVA substation and transmission line upgrade. Prepared design for new MCC with double ended power supply bus design and protective device coordination and settings. Mother Parker Inc., Power Supply System Project, Mississauga, ON. Senior Designer, responsible for performing tests and commissioning for new substations 3750 KVA addition and MCC design.

Page 4

Unimin Ltd., Grounding Study, Midland, ON. Sr. Designer responsible for site grounding study and site testing for 5 MVA main substation and mill. Dufferin Aggregates, Power Supply System, Milton, ON. Sr. Electrical Designer responsible for the addition of two new transformer posts, transmission line design and engineering on-site for main equipment substation upgrade.

1996 – 2003 Design-Service Engineer, Siemens, Turkey BURSA LIGHT RAIL SYSTEM PROJECT: Light Rail System 1500 V DC OVERHEAD LINE-25 km and Tunnel 5 km 12 stations. Design Engineer responsible for field engineering and test- commissioning on-site, emergency generator (6, 3 MVA) bus connection to main switchgear designing for 2X10 MVA, 154/34.5 KV power supply to plant. Bechtel-Enka Joint Venture, Power Generation Plant Project, Izmir-Adapazari, Turkey. City of Bursa, Light Rail System Project, Bursa, Turkey. Real (France), Shopping Center Project, Konya, Turkey. \

Pendik, Tersanesi/Shipyard, IST, Turkey. Designer responsible for site application for MV-LV distribution and control center 25000 KVA,

Burdur-Merkez, City Electrification Project, Turkey. City of Bursa, Power Transmission Project, Bursa, Turkey. lines design and application 66KV. 1982 – 1996 Engineer, Turkish Electricity Authority, TEK-Hydro Inc. City of Gonen, Power Distribution Project, Turkey. Site commissioning engineer responsible for commissioning of high voltage 154 KV 25 MVA power substation. City of Sincan, Power Transformer Project,, Turkey. Test Engineer, responsible for power transformer switchgear insulation/tests 50MVA 154/34, 5Kv. City of Soke, Small Industries & Power Supply Project, Turkey. Electrical Designer Turkish Hydro, Urban/Rural Electrification Project, TEK Ankara, Turkey. Electrical Designer, responsible for urban/rural electrification with HV transmission lines for voltages 15/34/154/380 KV. TECHNICAL EXPERTISE/SPECIALIST COURSES CERTIFICATIONS

OSHA - WHMIS –Training 2 WEEKS

CSIT SITE SAFETY TRAINING ALBERTA- certificate-

Bid EVALUATION commission certificate.

Siemens 6.3KV Vacuum breaker test –relay setting certificate.

SEL, GE, ABB, Relay setting knowledge and practice, Training course.

HYDRO utilities safety plan review award

NEC-CEC and Ontario Safety Authority book review.

Humber College certification

Six Sigma Certifications completed

REFERENCES AVAILABLE

Contact this candidate