Electrical Engineer-Engineering,Protection&commissoning
Resume:
CURRICULUM VITAE
E-mail id: adng8s@r.postjobfree.com
Mobile No: +966-*********
OBJECTIVE:
I can give my engineering, Project Management, Site management, Testing & Commissioning background. I can perfectly help for productivity and effectiveness of company. Beginning 2013 spanning over 8 years in EPC Projects, Transmission & Distribution, Power Plant, Substation and Oil & Gas projects. Utilize my skills and abilities to have a dynamic, challenging & rewarding career in an organization where I can have the opportunity to excel professionally. PROFILE:
A qualified Bachelor engineer with good knowledge and experience in electrical field, able to work on own initiative as a part of team. Having rich experience in Project Management and Site management for execution of Power Substation, Power plant, Distribution and Oil & Gas Projects. Having very good experience & knowledge in Testing and Commissioning of All Protection Relays/Main IED’s, Protection Panels scheme, Control Panels, Switchgear, LV Panels, Transformers, HV, MV and LV Cables for Substations (400,380,132, 33, 13.8 and 6.6 KV Levels). Operation and Maintenance of Electricity Distribution System, Testing and Maintenance of Automated Test Fixtures. PROFESSIONAL SKILLS:
Having extensive experience in project execution for successful completion of the project as per project contractual milestone
Ability to work in site execution for installation and testing and commissioning.
Experience in Testing and Commissioning of power system protection relays and control system.
Knowledge of SLD (Single Line Diagram), ANSI codes and symbols.
Design and Testing of Interlocking schemes, control and alarm schemes, OHL, Transformer and Breaker failure schemes.
Knowledge of operating the primary and secondary injection test kits like Omicron 256,Omicron 356,Doble F6150,Megger SMRT36,Punova,CPC 100,Winding Resistance Kit(SCOPE),Contact Resistance and Timing Meter(SCOPE), HV Test Kits and have some hands on experience on
Testing of Protection Functions like Distance protection, scheme communication protection, Line Differential protection, Transformer Differential protection (High Impedance/Low Impedance), REF protection etc.
Knowledge in trouble shooting of protection and control schemes as well as Functional and
Knowledge of configuring protection IED’s for Control/Alarms functions for the purpose of integrating with SAS systems and performing Local/close loop tests in co-ordination with SAS team.
Testing of CT”s, PT’s,Transducers, Multifunction meters, Energy Meters and all types of Digital Meters
EXPERIENCE DETAILS :( Starting from June 2013 till now) COMPANY: M/S WESCOSA LTD, KSA
Position Held :Sr.Electrical Engineer-Protection.
Duration: Since May 2018 to March 2021
Roles and Responsibilities:
Arrange and provide technical inputs to the Design Team, during the design phase of the project
Liaison with Client, Design Team and other stake holders of project to obtain approvals on design and NOC’s/permits during the construction.
Arranging delivery of all the equipment /materials at Project site as per base line schedule.
Arranging necessary resources (i.e.)/ sub-contractors, approved documents, drawings. Manpower, and tools/tackles at project sites.
Monitoring and supervising all site activities of the project and ensuring completion to budget and as per approved baseline time schedule.
Executing the projects according to the project plan
Monitoring the projects progress and making adjustments as necessary.
Coordinating with Testing & Commissioning Engineer for timely operation of Testing & Commissioning activity
Providing the solutions for the protection system and to enhance the support for the substation
control system.
Preparing the protection logic diagram & protection philosophy for the applicable bay along with
the interlock logics as per requirement.
Revising the scheme against client comments received from SEC/Consultants.
Preparing the Protection relay & BCU I/O list as per the application.
Review of protection relay setting calculation.
Adapting the setting calculation for the relays provided by Customer/Consultant.
Furnishing the test reports to the customer after completion of the testing & witnessing process.
Working in energized S/S during retrofit jobs without causing interruption to the system while
performing modification activities on existing schemes.
Testing of Relays,CT’s, PT’s,Transducers, Multifunction meters, Energy Meters and all types of
Digital Meters
Functional and Scheme testing of the Protection, Control and Switchgear panels.
Conducting High Voltage Tests for MV and LV Switchgear Panels, HV & MV Power Cables and
Switchgear equipment’s.
COMPANY: M/S SYNERGY POWER CO, KSA
Position Held : Electrical Engineer.
Duration: Since July 2016 to January 2018
Roles and Responsibilities:
Providing the solutions for the protection system and to enhance the support for the substation
control system.
Preparing the protection logic diagram & protection philosophy for the applicable bay along with
the interlock logics as per requirement.
Revising the scheme against client comments received from SEC/Consultants.
Preparing the Protection relay & BCU I/O list as per the application.
Review of protection relay setting calculation.
Adapting the setting calculation for the relays provided by Customer/Consultant.
Furnishing the test reports to the customer after completion of the testing & witnessing process.
Working in energized S/S during retrofit jobs without causing interruption to the system while
performing modification activities on existing schemes.
Testing of CT”s, PT’s,Transducers, Multifunction meters, Energy Meters and all types of Digital
Meters
Functional and Scheme testing of the Protection, Control and Switchgear panels.
Conducting High Voltage Tests for MV and LV Switchgear Panels, HV & MV Power Cables and
Switchgear equipment’s.
Co-ordinate and planning the testing activities with Customers (Witness) and planning the activities according to the schedules on a regular basis.
COMPANY: M/S ALFANAR CO, KSA (Short-term)
Position Held : Maintenance Engineer.
Duration: Since January 2016 to June 2016
Roles and Responsibilities:
Handling project activities involving working out various requirements with respect to utilities, manpower & monitoring overall project operations for ensuring timely completion.
Managing resources to perform project activities in cost effective manner.
Dealing with consultants/ licensors/ statutory bodies for compliance of requirements.
Ensuring proper inventory control on the spare parts and their replacement.
Identifying areas of obstruction/breakdowns and taking steps to solve the problems in an
effective manner.
Executing cost saving and energy saving techniques/ measures and modifications to achieve reduction in O&M expenditures and work within the budget.
COMPANY: M/S VOLTECH ENGINEERS PVT LTD
Position Held : Electrical Protection Engineer.
Duration: Since June 2013 to November 2015
Roles and Responsibilities:
Testing of Relays and Control Panels for various protection systems such as Line Protection, Feeder Protection, Motor Protection and Transformer Protection & Generator Protection.
Testing of Numerical and Electro-mechanical relays.
Able to read Single line Diagram and perform the testing of protection systems.
Schematic level testing of Relay and Control panels.
Incoming (QA/QC) Quality material inspection and testing.
Handling customer inspection and testing activities. TESTING AND CONFIGURATION OF RELAYS:
Testing and commissioning of following substation Protective and Control Relays. TYPE
MAKE
SKILLS
SEL 411L,311L,487Z,451,751A,710,
849.
SEL Configuration of relays using SEL
AcSELerator Quick SET Parameter
Tool.
RED670,REL670,RET670,RET615,
REF615,REF610,REF620,REF542
SPAJ140,SPAJ160,SPAU130,
SPAF140C
ABB
Configuration and Testing of ABB make
relays using Omicron Test Kits.
Configuration of relays using PCM 600 –
(Version 1.5,2.0, 2.2, 2.3,2.4,2.5 ).
7SD522,7UT612,7UT633,7UM622,
7SJ621,7SJ631,7SK802
SIEMENS Configuration of relays using DIGSI
Software
-(Version 4.81 to 4.93).
P546,P442, P443,P444,
P343,P220,P222,P243, P241,
P632,P633,P642,
P111,P123,P122,P127, P141,
P142,P143, P145, P545, P643,P921
ALSTOM/ Configuration of relays using Micom Studio, Agile software.
F650, D60, T60,MIV-II & MIV-II. GE Configuration of relays using F650,UR RELAY software.
T42, M42, S40&S42. SEPAM Configuration of relays using SFT2841 software.
-(Version 16.0).
List of Projects Completed: Saudi Arabia(OIL&GAS-ARAMCO) Project Name
Customer End Customer Nature of Job
Testing of 115KV
HV Protection
Panel& Relays for
115kV GIS
ARAMCO
substation at
DURMA,Saudi
Arabia.
M/S SEPCO M/S ARAMCO
Configuration and testing of all Bays
protective relays
( SEL 311L,L90,451,751A )
Functional Checks for all bays and LCC
panels.
Commissioning and energisation co-
ordination.
Testing of 115KV
HV Protection
Panel& Relays for
115kV GIS
ARAMCO
substation at
HOFUF, Saudi
Arabia.
M/S SEPCO M/S ARAMCO Configuration and testing of all Bays protective relays
( SEL 311L,L90,451,751A )
Functional Checks for all bays and LCC
panels.
Commissioning and energisation co-
ordination.
Testing of 115KV
HV Protection
Panel& Relays for
115kV GIS
EXPANSION CPF
ARAMCO
substation at
KHURAISH, Saudi
Arabia.
M/S SAIPEM. M/S ARAMCO Configuration and testing of two Bays protective relays (P546,L90,451,751A,710 )
Functional Checks for two bays and LCC
panels.
Commissioning and energisation co-
ordination.
Testing of MV GIS&
Protection Relays
for 33 kV GIS at
TASNEE
PETROCHEMICAL
PLANT at Jubail,
Saudi Arabia.
M/S TASNEE
LTD.
M/S TASNEE
LTD.
Configuration and testing of protective
relays (7SJ610,7SJ642&7SD610 relay )
Testing of CB,CT’S VT’S,busbar, Cable and
MFM meters.
Testing of
115/33/13.8kV
Switch gears &
Protection Relays
for JIGCC
REFINERY
PROJECT
substation at
Jazan, Saudi
Arabia.
M/S Tecnicas
Reunidas.
M/S ARAMCO Configuration and testing of all Bays
protective relays (SEL
311L,451,487Z,710&751A )
Functional Checks for all MV&LV Switch
gears.
Functional Checks for all MV&LV MCC’S
Commissioning and energisation co-
ordination.(3 substations)
Testing of
115/33/13.8kV
Switch gears &
Protection Relays
for JIGCC
REFINERY
PROJECT
M/S Tecnicas
Reunidas.
M/S ARAMCO Configuration and testing of all Bays
protective relays (SEL
311L,451,487Z,710&751A )
Functional Checks for all MV&LV Switch
gears.
Functional Checks for all MV&LV MCC’S
substation at
Jazan, Saudi
Arabia.
Commissioning and energisation co-
ordination.(3 substations)
Testing of MV
Switch Gear and
Protection Relays
for 13.8 kV and 33
kV substations at
ABU ALI ISLAND
at Abuali, Saudi
Arabia.
M/S AL-TOUKHI
COMPANY.
M/S ARAMCO Configuration and testing of protective relays (SIEMENS 7SD532&7SD532 cable
differential and GE relay )
Functional Checks for all switchgears.
Middle East - Saudi Arabia(SAUDI ELECTRICITY CO & PRIVATE UTILITIES) Project Name
Customer End
Customer
Nature of Job
Testing of 132kV HV
Protection Panel& Relays
for 8783 SEC substation
at Wadi al Dawasir,
Saudi Arabia.
M/S NOOR
COMMUNICATION
LTD.
M/S SEC Configuration and testing of protective
relays (RED670,RED615,REC670,P545 )
Functional Checks for two bays and LCC
panels.
Testing of Control panel
for 380/110/13.8 kV EHV
substation at SWCC
WATER PLANT at
Jeddha, Saudi Arabia.
M/S AL-TOUKHI
COMPANY.
M/S SEC Configuration and testing of protective
relays(REF615 ABB feeder protection
relay)
Testing of auxiliary relays
(RXMS1,RXSF,RXMD,RXKL,etc).
Testing of CT testing and loop check.
Testing of metrosils,
MCB’S,Contactors&Timers.
Scheme check for switch gear.
Testing of Control panel
for 110/13.8 kV
substation at JEDDHA
NEW PORT at Jeddha,
Saudi Arabia.
M/S NESMA
ELECTRIC
COMPANY.
M/S SEC Configuration and testing of protective
relays
(P141 ALSTOM feeder protection relay)
Testing of auxiliary relays (MVAX,
MVAJ,RXMS1,RXSF1,RXKL,etc).
Testing of CT,VT& VCB.
Scheme check for switch gear
Testing of MV and LV
Switch Gear Protection
Relays for 4.16 and 13.8
kV substation at Al
Qassim Central Power
plant at Qassim, Saudi
Arabia.
M/S NCC CO. M/S SEC Configuration and testing of protective relays (argus 7S110 feeder relay )
Testing of VCB, VT’S,busbar, Cable and
MFM meters.
Testing of MV Switch
Gear Protection Relays
for 13.8 kV Switch gear
at 8055 SEC
substation at Riyadh.
M/S Siemens. M/S SEC Testing of protective relays (MCGG11 ALSTOM feeder protection relay).
Testing of VCB.
Erection and Testing of
MV Switch Gear and
Protection Relays for
13.8 kV Switch gear at at
SAGO at Jizan, Saudi
Arabia.
M/S Schneider
Electric.
M/S SAGO Configuration and testing of protective
relays (T40 Sepam feeder relay )
Testing of VCB, VT’S,busbar, Cable and
MFM meters.
Erection and Testing of
MV Switch Gear and
Protection Relays for
13.8 kV and 33 kV
Substation at Almarai
milk farm at Alkharj.
M/S Schneider
Electric.
M/S ALMARAI Configuration and testing of protective relays (P546&T40 Sepam feeder relay )
Testing of VCB and MFM meters.
Functional Checks for all switchgears.
Testing of 13.8 kV
Capacitor bank for
115/13.8kV
Mardumah(ROYAL
COMMISSION)
substation at Jubail,
Saudi Arabia.
M/S Hadi Haider
Co
M/S ROYAL
COMMISSION
Erection & inspection of capacitor bank.
Testing of capacitors, reactors and
NCT’s (5 units)
Testing of MV Switch
Gear Protection Relays
for 4.16 kV substation at
KAPSARC at Riyadh, Saudi
Arabia.
M/S
ELSIEF(ARAMCO)
CO LTD.
M/S KAPSARC Configuration and testing of protective relays (T40,M42&MLJ SYNCH feeder relay)
Testing Cable and MFM meters.
Testing of 13.8 kV
Capacitor bank for New
33/13.8 kV skaka
industrial substation at
Al-Jouf, Saudi Arabia.
M/S TAQQAT
GLOBAL CO LTD
(ALHAITAM).
M/S SEC Erection & inspection of capacitor bank.
Testing of capacitors, reactors and
NCT’s (2units)
Testing of 33 kV
Transformers in Almarai
at milk farm at Alkharj,
Saudi Arabia.
M/S Schneider
Electric.
M/S ALMARAI Testing of Two Power transformers(AMC). Testing of MV Switch
Gear Protection Relays
for 13.8 kV Switch gear
at 8055 SEC
substation at Riyadh.
SAUDI BUILDING
MAINTANANCE
CO LIMITED.
M/S SEC Configuration and testing of protective
relays (7SK Siemens feeder protection
relay)
Testing of VCB, Transformer and Cable.
Project Name
Customer End Customer Nature of Job
Testing of MV Switch Gear
Protection Relays for 13.8 kV
substations at PRINCES
NOORAH UNIVERSITY at Riyadh.
M/S SAFARI
CO LTD.
M/S PNU
UNIVERSITY Configuration and testing of
protective relays (T40 Sepam
feeder relay )
Testing of VCB,
Transformer,busbar, Cable and
MFM meters.
Testing of MV Switch Gear
Protection Relays for 13.8 kV
substations at MILITARY OF
INTELLIGENCE CAMPUS at
Riyadh, Saudi Arabia.
M/S AN-
NASBAN
GROUP.
M/S MIC Configuration and testing of
protective relays (REF615 ABB &T40
Sepam feeder relay ) Testing of
VCB,Transformer,Cable and MFM
meters.
Testing of LV Switch Gear
Protection Relays for
Distribution substation at
Saudi Arabian Monetary
Authority at Riyadh, Saudi
Arabia.
M/S SAMA
(GOV).
M/S SAMA Configuration and testing of
protective relays (P142 Schnider
&T41 Sepam feeder relay )
Testing of ACB,Transformer and
MFM meters.
Across - India
Project Name
Customer End Customer Nature of Job
Testing & Pre
commissioning of MV
Switch Gear Protection
Relays for 66/11 kV
Substation in CAIRN
OIL&GAS PLANT at
Barmer,Rajasthan.
M/S CAIRN
ENERGY
LTD.
M/S CAIRN Configuration and testing of protective
relays (P442,141,REF615,RET642)
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/33 kV
Substation in TPCIL
THERMAL POWER PLANT
at Nellore,Andhra Pradesh.
M/S BGR
ENERGY
SYSTEM
LTD.
M/S TPCIL Configuration and testing of protective
relays (P632,P442,P343,P127) in 2*660
MW Thermal Power Plant
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 400/132 kV
Substation in
NAVABARATH THERMAL
POWER PLANT at
Pollanchi,Andhra Pradesh.
M/S NAVA
BHARAT
VENTURES
LTD.
M/S NAVA Configuration and testing of protective
relays (REL650,P444,RET615) in 4*60 MW
Thermal Power Plant
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/33 kV
M/S
SIEMENS.
M/S JK TY Configuration and testing of protective
relays (7SA61,7SJ80,7SR011) in
Substation in JK TYRES
LIMITED at
Sriperampudur,Chennai.
132/33kV substation at JK TYRES
LIMITED.
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/11 kV
Substation in ADITHYA
BIRLA UTKAL ALUMINA
PLANT at Dikri,Orissa.
M/S ABB. M/S ADITHYA Configuration and testing of protective relays (REM545,RET670,7UM522,7SJ80)
in 3*60 MW Capitive Power Plant
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/11kV
Substation in 30 MW
SOLAR POWER PLANT at
Raipur,Chattisgarh.
M/S AMTEK
INDIA LTD.
M/S HARTEK Configuration and testing of protective relays (P442,P643,P142) in 30 MW Solar
Power Plant
Testing & Pre
commissioning of MV Switch
Gear Protection Relays @
132/33 kV at CHUZACHEN
HYDRO ELECTRIC
PROJECT at East,Sikkim.
M/S GATI
INFRA PVT
LTD.
M/S CHDP Configuration and testing of protective
relays (P741,P921,P141) in 2*55 MW
Hydro Power Plant
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/33 kV
Substation in GSPC ltd,at
Yanam,Pudhucherrey.
M/S GE
POWER LTD.
M/S GSPC Configuration and testing of protective
relays (F750,MIV-2,MIF-2) in 132/33 kV
Chndel Substation at GUJRATH STATE
PETROLUM CORPORATION.
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/33 kV
Substation in TATA STEELS
LTD at Jarjpur,Orissa.
M/S VOLTAS
LTD.
M/S TATA
STEELS
Configuration and testing of protective
relays (P632,P141,P127,P122) in
132/33kV Substation at TATA STEELS
INDIA LTD.
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 132/33 kV
Substation in TECNO PARK
at Kollam,Kerala.
M/S
SIEMENS.
M/S KSEB Configuration and testing of protective
relays (7SK804,7SK802,7SJ803.7SJ802,
7SJ622,REF615,REM615,P141,P143,P241)
at INDIAN OIL CORPORATION LTD.
Testing & Pre
commissioning of HV
Control panels & Protection
Relays @ 6.6kV&11kV
Substation in IOCL at
Paradeep,Orissa.
M/S
ROHINI.
M/S IOCL Configuration and testing of protective
relays (REM545,RET670,7UM522,7SJ80)
in 3*60 MW Captive Power Plant
Testing & Pre
commissioning of MV Switch
Gear Protection Relays @
132/11 kV at TATA STEELS
LTD at Orissa.
M/S
FLAKTWOOD
LTD.
M/S TATA
STEELS
Configuration and testing of protective
relays (REF615,REM615,RET670) in
33/11 kV Substation at ZF Plant Ltd
Academic Performance:
Examination Passed Institution Year of Passing % of Marks Professional Qualification:
B.E in Electronic &
Electronics Engineering
Diploma in Electrical and
Electronics Engineering
MBA in Project
Management
Anna University,
TamilNadu,India
St.Xaviers Polytechnic
College.
Allagapa University,
Tamil Nadu By Distance
Education Mode.
April 2013
April 2010
December 2016
65%
68%
65%
Trainings Details:
Undergone one week training on Transformer Manufacturing and Testing in Alfanar
transformer factory.
Undergone one Month training on Numerical Relays Testing in VTC -CHENNAI
The training covered all the numerical relay makes: ABB, SIEMENS and ARIVA. Achievements:
I got an appreciation letter from the customer (TECNICAS RENUIDAS) by last year for successful completion of project on time for testing and commissioning of 3 NO’s substations in JIGCC ARAMCO REFINARY PROJECT.
Personal Profile:
Father's Name : M.Kaja Mydeen
Permanent Address : 54, PKP North Street, Melapalayam.Tirunelveli-627005, Tamil Nadu, India, Pho: 0091-9791868735,
Language Known : English, Hindi,Tamil, and Malayalam. Passport No : R 8929030 (Expiry Date: 14-02-2028). Driving License : Having SAUDI ARABIA Driving License DECLARATION:
I hereby declare that all the information furnished above is true to the best of my knowledge. Date : 22-06-2020 (K.Mohideen Gnaniyar)
Contact this candidate