REENA ATTRI

Assistant Professor

Department of Electrical Engineering

College Address: Seemant Engineering Institute(Constituent Government Engineering Institute) Pithoragarh (Uttarakhand )262501

Home Address: 282/16 Friends Enclave

Shubhkhera, Paonta Sahib

Distt. Sirmour (H.P)

Email: adncnj@r.postjobfree.com

Mobile No: 989-***-****

Objective:

To work in an organization where my intelligence,teaching and research experience can be helpful as well as appreciated.

Professional Experience:

Work Experience- 7 years and 4 months

• Currently working as Assistant Professor (Electrical Engg.) in Constituent Government Engineering College,Seemant Engineering Institute,Pithoragarh(Uttrakhand) on contractual basis (Consolidated salary –Rs 35000) from 3rd March,2014 to till present.

• Worked as Assistant Professor (Electrical Engg.) in Drona’s College of Management & Technical Education Dehradun,from 1st March,2013 to 28th February,2014.

• Thorough understanding of the subject.

Educational Qualification:

S.No. Name Year Board/University Division Percentage 1. High School 2004 CBSE Ist 76.6

2. Intermediate 2006 CBSE Ist 73.1

3. B.Tech (Electrical and

Electronics Engineering)

2011 DAVIET,Jalandhar Ist 74.2

4. M.Tech (Control System) 2013 Graphic Era University Ist 72.3 Training and Workshop

• Undergone an Industrial Training of One Month held after 2nd Semester at DAV Institute Of Engineering and Technology, Jalandhar in 2008. In this training, I practically studied the basics of motor winding, transformer winding and Household Wiring.

• Undergone an Institutional Training of 6 weeks after 4th semester in PLC and SCADA from IMPACT Engg. at DAV Institute Of Engineering and Technology, Jalandhar in 2009.

• Attended two days Workshop on OrCAD (PSpice) Circuit Simulation organized by EMTECH FOUNDATIONS at DAV Institute of Engineering and Technology in 2010.

• Attended6 months industrial training in Control Panel Designing & Costing andalso in BDC,IEC KIRLOSKAR,Chandigarhfrom Jan to June,2011.

• Attended short term course of one week on ‘Personality Development’ conducted by management department from 01.08.2016 to 05.08.2016 atNITTTR Chandigarh.

• Completed two week FDP On “Enterpreneurship” Organized by TBT-KIET, Ghaziabad from 9.06.17 To 20.06.17 at SIT, Pithoragarh.

• Attended one week workshop in “DRIVER & SMT Section”from 3.07.17 to 7.07.17 at KONARK PRODUCTS in Kala Amb, TehsilNahan,DisttSirmour.

• Attended Faculty Induction Workshop organized for one week by Education cell,IIT, Kharagpur from 3rd to 7th July,2018.

• Participated as a Course Co-Ordinator in the Workshop on “ MATLAB” organized by EE Department

,SIT, Pithoragarh from 21st to 22nd,2018.

• Attended one week workshop regarding “Driver Manufacturing” from 3.2.18 to 7.2.18 at KONARK PRODUCTS in Kala Amb, Tehsil Nahan,Distt. Sirmour.

• Attended short term course of one week on “Laboratory Practices in Electrical Machines and Control”conducted by Electrical Engineering department from 22nd to 26th June,2019 at NITTTR Chandigarh

Software Proficiency:

• Basics of Computer, MS Office

• Programming Languages : C, C++, Java, MATLAB, LabVIEW Strengths:

• Self Confidence

• Positive Thinking

• Hard Working

• To want achievements and great progress in life

Projects:

• B.Tech:

Title: Study of “ Using exhaust of air conditioner installed in a complex in order to harness the energy”

• M.Tech:

Minor Project:

Title: “An Optimal allocation and sizing of Distributed generation in distribution system for loss reduction” Major Project:

Title: “Modelling and simulation of Matrix Converter for high efficiency power conversion” Publications:

National / International Conferences:

• REENA ATTRI,CHARU MAGGU & SHARWAN, “Modelling and Simulation of Matrix Converter for High Efficiency Power Conversion”, KNOWLEDGE NEWS An International Journal of Ideas,vol. 003, no. 006, pp.5217-5223, 2013

• REENA ATTRI, “Analysis on designing a model to control the speed of induction motor by V/F using PWM technique” published in National Conference on Recent Advances in Sciences & Technology

(NCRAST-2015),pp 559-565, ISBN: 978-93-85437-03-8

• REENA ATTRI,Proper location and sizing of DG in distribution system for loss reduction in 6-bus system” published in National Conference on Recent Advances in Sciences & Technology (NCRAST- 2015),pp 566-572, ISBN: 978-93-85437-03-8

• REENA ATTRI,“Loss sensitivity factor method for optimal allocation and sizing of DG in distribution system for loss reduction” published in National Conference on Recent Advances in Sciences

&Technology (NCRAST-2016)

• REENA ATTRI,“Power generation technology ” published in National Conference on Recent Advances in Sciences &Technology (NCRAST-2017),pp 297-301,ISBN:978-93-86724-77-9

• REENA ATTRI AND PUSHPENDRA KHARAYAT,“Role of proper location of DG in distribution system ” published in National Conference on Recent Advances in Sciences &Technology (NCRAST- 2017),pp 315-318, ISBN:978-93-86724-77-9

• REENA ATTRI,“Adaptive Control Schemes ” published in International Conference on New Technology Opportunities in Networking and Sciences (NEWTONS-2018)

• REENA ATTRI, “Cogeneration Technology”,vol 7,Issue3, in May,2019,ISSN:23210613 Achievements

• Second Prize in Mock Drill Placement(Group Discussion),2009

• Co-Ordintor of a National Level Technical Cultural Symposium‘INCOGNITO’10.

• Winner of Mind vs Component at National Level Techfest‘INCOGNITO’10’.

• Acted as Co-Ordinator of Techninal session & Cultural committee in 2nd National Conference on Recent Advances in Sciences & Technology(NCRAST-2016)

• Organising co-chair of International conference on New Technological Opportunities in Networking and Sciences conducted in june,2018 at SIT,Pithoragarh(U.K)

• Acted as a Co-Ordinator of Cultural committee in International Conference on New Technology Opportunities in Networking and Sciences (NEWTONS-2018)

• Acted as a Co-Ordinator of Technical session in TECHFEST -2018 at SIT,Pithoragarh

• Acted as a Judge of Technical session in TECHFEST -2018 at SIT,Pithoragarh.

• Acted as a Judge of Fashion Show in TECHFEST -2019 at SIT,Pithoragarh Institutional In-charge

• Class Co-Ordinator of B.Tech 3rd Year EE (2015)

• Class Co-Ordinator of B.Tech 4th Year EE (2016 )

• Class Co-Ordinator of B.Tech 2nd Year EE (2017)

• Project Co-Ordinator of B.Tech 4th Year EE (2017)

• Class Co-Ordinator of B.Tech 3rd Year EE (2018)

• Project Co-Ordinator of B.Tech 4th Year EE (2019) Subjects Taught:

1. Basic Electrical Engineering (B.Tech 1st Year EE) 2. Basic Network and Analysis (B.Tech 2nd Year EE) 3. Network Analysis and Synthesis (B.Tech 2nd year ECE) 4. Control System (B.Tech 2nd year EE)

5. Control System (B.Tech 2nd year ECE)

6. Control System (B.Tech 2nd year ME)

7. Electrical Measurement and Measuring Instruments (B.Tech 2nd Year (EE) 8. Electrical and Electronics Engineering Materials (B.Tech 2nd year EE) 9. Electrical Machine –I (B.Tech 2nd year EE)

10. Electrical Machine –II ( B.Tech 3rd Year EE)

11. System Engineering ( B.Tech 3rd Year EE)

12. Applied Electronics and Instruement ( B.Tech 3rd Year EE) 13. Electrical Machine Design ( B.Tech 3rd Year EE) 14. Modern Control System ( B.Tech 4th Year EE)

15. Digital Control System ( B.Tech 4th Year EE)

Labs Taken:

1. Basic Electrical Engineering Lab (B.Tech Ist Year (Common)) 2. Network Lab (B.Tech 2nd Year EE and ECE )

3. Simulation Lab (B.Tech 2rd Year EE)

4. Machine Lab (B.Tech 2rd /3rd Year EE)

5. Control System Lab (B.Tech 2nd Year EE and ME)

6. Control System Lab (B.Tech 3rd Year EE)

7. Electrical Measurementand Instruementation Lab (B.Tech 2rd Year EE) 8. Applied Electronics and Instruement Lab ( B.Tech 3rd Year EE) Projects Supervised:

1. Project entitled “Prepaid energy meter with auto theft detection” as a guide for the group named

“Bhavik Ojha,Hem Kapri and Vaibhav Kaintura” of B.Tech Final Year Electrical Engg submitted in June 2015.

2. Project entitled “Infrared remote control for home appliace” as a guide for the group named “ Neeraj Shahi,Sanjay Kumar,Rajendra Dhami” of B.Tech Final Year Electrical Engg submitted in June 2016. 3. Project entitled “Hybrid Solar Inverter”as a guide for the group named “Mohit Singh and Satendra Sahani,Vivek Panwar and Pankaj Singh” of B.Tech Final Year Electrical Engg submitted in June 2017. 4. Project entitled “Conversion of sound energy into electrical energy” as a guide for the group named

“Shivin Khatri,Sheela Gunjyal and Aakansha Kholiya” of B.Tech Final Year Electrical Engg submitted in June 2018.

5. Project entitled “Sun tracker for solar Panel” as a guide for the group named “Arjun Sahni,Labham Saxena,Priya Bhagat and Meenakshi Pandey” of B.Tech Final Year Electrical Engg submitted in June 2019.

6. Project entitled “Induction motor protection system from single phase and over temperature” as a guide for the group named “Geeta Pandey,Kavita Garwal and Nagma” of B.Tech Final Year Electrical Engg submitted in June 2020.

Personal Information:

• Father’s Name: Mr. Kahan Singh Mother’s Name: Mrs.Indra Singh

• Martial Status: Married

• Nationality: Indian

• Date of Birth: 9th April, 1989

Declaration:

I here by declare that the above information is true & correct to the best of my belief and knowledge Reena

Attri

Date: 18/07/2020

Place: Paonta Sahib(H.P)

Contact this candidate