NARENDRAN . P
Testing & Commissioning Engineer Phone: +91-735******* +965********
E-mail : adn0ju@r.postjobfree.com
S
SUMMARY
** ***** ** ********** ** Testing and commissioning, Installation in Power Sector and oil and Gas (9 years in Middle East).
CAREER PROFILE
Organization : M/s Energy solutions llc, Kuwait
Designation : Senior Testing and Commissioning Engineer
Period : Jan 2019 to till date .
Organization : M/s PDCS PROJECTS INDIA PVT LTD
Designation : Senior Testing and Commissioning Engineer
Period : Oct 2013 to Oct 2018.
Organization : M/s INEL PROJECTS INDIA PVT LTD
Designation : Senior Testing & Commissioning Engineer
Period : Apr 2009 to Jun 2013.
Organization : M/s SYSPRO AUTOMATION PVT LTD
Designation : Testing supervisor
Period : Apr 2008 to Apr 2009.
MAJOR WORK EXECUTED COUNTRIES
India, Kuwait, Qatar, UAE(Abu Dhabi )
TESTING AND COMMISSIONING ACTIVITIES PERFORMED:
Testing & Commissioning of Indoor / Outdoor packaged substations and substation equipment’s with all type of switchgears including SF6, VCB & ACB’s from 400V to 400kV.
Testing & Commissioning of Protection relays for 132kV to 0.415kV
Testing & Commissioning of 11kV Capacitor panel and Power Transformer.
Generator SC, Stability tests performed and Synchronization with Grid.
Busbar Stability and Sensitivity tests performed for Switchgear
Differential and REF Stability tests performed for Power Transformer.
Trouble shooting of various electrical systems including Oil & Gas sector, Thermal power plants.
Design, Configuration, Testing and Commissioning of Alstom and others make protection relays in compliance with ANSI/IEEE standards.
Performing all FAT & SAT activities.
Demonstration of all protection functionality to Customer.
Testing and Commissioning of various types of relays including Areva, Siemens likely-, Transformer protection,, Motor protection, Switchgear feeder protection, and Load Shedding function, LBB protection, Synchronizing Scheme, A/R closer funtion and SCS signal simulation. Breaker and calibration of Digital Meters, Energy Meter.
Testing of Transformer differential, Line differential (Cable diff with pilot wire and FO Methods), Bus bar differential test (Low impedance & High impedance).
High Voltage,Partial Discharge testing for Cables and different Switchyards viz 220 kV,132kv,33kV,11kV, 6.6kV,3.3kV,0.440kV .
Dedicated experience for preparing the relay IO list of SCADA signals.
Preparation of pre-commissioning check lists, test reports, as built drawings, cable schedules and detailed commissioning schedules for above mentioned systems.
Modification of schemes as per Customer and Site requirement.
Final testing of relays after preparing Relay Configuration as per SLD, site drawing.
Preparation of detailed work schedule, drawings, cable schedules to carry out the shutdown work for modifying or upgrading the existing electrical systems such as additional bays in existing substations, additional panels to existing switchgears. Annual maintenance testing of relays and substation equipment’s.
Responsible to arrange and attend the design review meetings with the clients and vendors.
Maintaining Test Report documents and submitting to clients
PROJECTS EXECUTED IN KUWAIT
Project : MEW Annual maintenance - FAC
Client : Ministry of Electrical and Water supply kuwait
Contractor : NCC –National Contractor company
Work location : Wafra A,B,C,D,E,F,G,I,E1 substations
Work details: 132/11kv Protection Relays Testing
Project : MEW Annual maintenance - FAC
Client : Ministry of Electrical and Water supply kuwait
Contractor : Shanghai Electric kuwait
Work location : Faheel D, jahra hospital A,B substations
Work details: 132/11kv Protection Relays Testing
Project : MEW Mutla Housing Board
Client : Ministry of Electrical and Water supply kuwait
Contractor : L&T kuwait
Work location : Multa 3D,3G,3I,3E,4I,4G substations
Work details: 132/11kv Protection Relays Testing, GIS Testing, 11kv Switch gear
Testing, Scheme correction, transformer testing, ner, cable testing
Project : MEW power plant
Client : Ministry of Electrical and Water supply kuwait
Contractor : Alganium kuwait
Work location : Gas Combined cycle power station
Work details: 33/11/0.415kv protection relay, switch gear testing, power transformer testing
Project : CAUSWAY Project
Client : Ministry of Road and traffic department
Contractor : Hyndai kuwait
Work location : 11kv/415v substations
Work details: 11/0.415kv protection relay, switch gear testing, power transformer testing
Project : Clean Fuel Project - Packaged substation
Client : KNPC (Kuwait national Petroleum Company)
Contractor : JGSK
Work location : SAT for 175A,149,148,164 substations
Work details: 11/6.6/0.415kv commissioning,protection relay, switch gear testing, power transformer testing
Project : Elevated Substations for KOC
Client : KOC (Kuwait oil Company)
Contractor : SKEC
Work location : GC01,GC02,GC04,GC06,GC07,GC11,GC17,GC19,GC20,GC21,GC22, BS140, BS151,BS171 substations
Work details: 11/6.6/3.3/0.415kv Commissioning, protection relay, switch gear testing, power transformer testing
Project : MEW substations
Client : Ministry of Electrical and Water supply kuwait
Contractor : kharafi national kuwait
Work location : Abu faterra E,D, sabah al ahmed 2A,2B,2G substations
Work details: 132/11kv Protection Relays Testing, GIS Testing, 11kv Switch gear
Testing, Scheme correction, transformer testing, ner, cable testing
Project : MEW substations
Client : Ministry of Electrical and Water supply kuwait
Contractor : Al ahleia kuwait
Work location : Sabah al ahmed F,G,D, E substations
Work details: 132/11kv Protection Relays Testing, GIS Testing, 11kv Switch gear
Testing, Scheme correction, transformer testing, ner, cable testing
Job Responsibility :
Act leading Engineer on FAT and handing for 12 package substation. Inspection of Control and Relay Panel, Scheme checks and relay testing for FAT with end client. Factory testing, reports preparation and submision activies.
Testing & Commissioning of 11/6.6/3.3/0.44kV Switchgears.
Testing & Commissioning of 3.3/0.44kV Power Transformer.
Testing & Commissioning of all Primary equipment like CT, PT, BUSBAR,Bus ducts, Circuit Breakers, Power modules, Meters, Lighting DBs, Scheme checks, functional test, Bus bar stability, etc.
Verification & Validation of all major schemes like Feeder, Incomer, transformer, etc
Commissioning of 110 V DC Charger & Battery Banks, Load Discharge Test of Battery Banks.
ENMC signals tests performed and Commissioning done successfully.
Relay testing, Contact Resistance & Timing Test of VCB’s, Operational & Interlock Checks of VCB’s, Busbar Megger & Hi-Pot Test, CT Primary & Secondary Injection,, Hi-Voltage Test of MV Cables
Act leading Engineer on SAT and handing for 14 Elevated substation. Testing of Control and Relay Panel, Scheme checks and relay testing for SAT with end client.
Testing & Commissioning of 11/6.6/3.3/0.44kV Switchgears.
Testing & Commissioning of 11/ 3.3/0.44kV Power Transformer.
Stability test of cables with end to end and transformers with ref stability
Testing & Commissioning of All Numerical Relays like Siemens-7SD808, 7SR220, 7SR242, MICOM 243,241 343, 141, ABB REF615, etc.
Testing & Commissioning of all Primary equipment like CT, PT, BUSBAR,Bus ducts, Circuit Breakers, Power modules, Meters, Lighting DBs, Scheme checks, functional test, Bus bar stability, etc.
Verification & Validation of all major schemes like Feeder, Incomer, transformer, etc.
MAJOR PROJECTS EXECUTED IN QATAR
Working as a Testing & Commissioning Engineer for the following,
·Ezdan housing project ezdan 1 Substation (220/132/11KV), KAHRAMAA (Through M/s Siemens)
·Ezdan housing projects Ezdan 2,3,4 Substations (132/66/11KV), KAHRAMAA (Through M/s Siemens)
·Mesaieed industries E Substations (220/132/33KV), KAHRAMAA (Through M/s Siemens)
Job Responsibility :
Testing & Commissioning of Protection panels for OHL and UGC feeders.
LCC panel, Switchgear panel, Relay panel & LVAC panel scheme checks done including Local Interlocks, Local Sync checks, Remote Sync checks, Load shedding scheme checks and Commissioning done successfully.
Busbar Stability Test performed by Making fault and ensure Polarity.
Binary Input signals Test performed from Source to Local LCC, Remote BCU Relay panel, Remote SCS and NCC for 11 /66 /132 / 0.415 Kv.
Relay software up gradation and Configuration done as per scheme requirements.
Performed the End to End test for 7SD53 relays.
Co-ordination of the high voltage test and partial discharge test for switchgear busbar.
MAJOR PROJECTS EXECUTED IN ABU DHABI
Worked as Testing and Commissioning Engineer for the following,
Takreer oil refinery Ruwais RRE –exp3- 7 Substaions,Takreer (Through M/s Samsung)
MAJOR PROJECTS EXECUTED IN INDIA
Working as a Testing Engineer for the following project.
400 KV Adani power S/S, Sami, Gujarat.
400kv APTRANSCO S/S Uravakonda, andhra pradesh
400/220 KV PGCIL S/S, Tirunelveli, Tamilnadu
Bathia coke division 110/11KV,Chennai
NTPC 3*500 MW power plant, chennai
J.R . Steels 110/33KV,Chennai
Loyal Textile 33/11KV,Andhra Pradesh
TESTING KITS USED:
Secondary injection kit such as Omicron,Doble (FS600), ISA Test Unit, Sverker 750 Programma, Freja series
C.T Analyser Omicron, CPC 100 Omicron, VANgard, Breaker analyzer scope
Contact Resistance Meter – Scope 100Amps, Single Pole Timer – Scope l.
High Pot Kit – 40Kv, ODEN Primary injection.
Experience with ALSTOM / AREVA RELAY
Directional/Non-directional O/C Relay : - P122, P127
Transformer Differential Relay
: - P632, P633
Motor Protection Relay
:- P241
Feeder Protection Relay
:- P141,P143,P132
EXPERIENCE WITH SIEMENS RELAY
Directional/Non-directional O/C Rela
: -7SJ621
Motor Protectiopn relay
:-7SK80
Transformer Differential Relay
: -7UT612,7UT613,7SG143(DUOBIAS)
Easun Reyrolle
:-7SR series, Argus series
PROTECTION RELAY SOFTWARE HANDLED
ALSTOM
: MICOM S1 STUDIO, AGILE
SEL
: ACSELERATOR QUICKSET
SCHNEIDER
: MICOM S1 STUDIO V5.1
EASUN EYROLLE
: REYDISP
PERSONAL DETAILS
Professional Qualification
: B.E.ELECTRICAL AND ELECTRONICS.
College,Year of completion
:Rajalakshmi Engineering college, chennai.2008
University
: Anna University, Chennai.
Languages Known
: Tamil,English, Hindi.
Date of Birth
: 20.06.1986.
Status
: Married.
Passport no.
: Z4712602.
Passport of issue
: CHENNAI.
Passport expiry date
: 04.11.2028
Nationality
: Indian.
Total Experience
: 13 yrs.
Gulf Experience
: 9 yrs.
Ready for joining
: Immediately.
Permanent Address
:1/106 valles warror koil street manapakkam, Chennai 600125
DECLARATION:
I hereby declare that all the information mentioned above is true to the best of my knowledge.
Yours Sincerely,
Date:
(Narendran.P)