Operation Specialist Exxon Mobil

BENJAMIN MCCALEBB

**** ******** ***** **** *******, TX 77521 · 832-***-****

****************@*****.***

** **** ***** ** *********** experience and success in Industrial Electrical Operation and Tele-Communications with Fortune 500 Companies

EXPERIENCE

2020-2020

LEAD ELECTRICIAN,EIC ELECTRICAL SOLUTIONS. BAYTOWN /HOUSTON TX

EXXON MOBIL

Installation conduit and terminations, underground bonding, disconnect panels and switches, transfer

ATS System and switches from battery backup connections, motors, Generators connections, Transformers,

Motion sensors, breakers, UPS Systems installations and connections/ terminations other etc and supervise

Crews.

2019-2020

ELECTRICAL JOURNEYMAN,CALIBER SOLUTIONS. SWEENY TEXAS

PHILLIPS 66 INDUSTRIAL

Installing conduit, switchgear, MCC breakers, stress cones terminations, instruments equipment, cable

Tray and supports, Transformers, HAVC maintenance and terminations, Motors, 4160, 1380,480/277,120

115/110 and starters, switches, lighting panels, UPS Systems, Marsh cabinets, underground/grounding

Other etc.

2019 – 2019

ELECTRICAL FOREMAN,RICHARD AUTOMATION. HOUSTON/TEXAS CITY TX

MARATHON INDUSTRIAL

Leadership duties, managed and supervised crews in the field with experience in semi-skills and in-skilled laboring duties

Maintenance and repair of wide variety of electrical systems and job completion on cable tray, conduit, instruments,

Terminations, UPS Systems, MOV’s connections to dock and ship receiving panels, MCC, breakers, and switch gear and

Testing and megging cable comissioning.

2019 – 2019

ELECTRICAL JOURNEYMAN,ENERMECH FREEPORT,TX

LNG INDUSTRIAL

Installation industries network systems and signal security equipment, wireless communication systems field

Service, conduit installation, and instrument terminations, panels, lighting LP, switches and controls, disconnects

Gia-tonic systems and install Motors inside LNG Units, HAVC Equipment, setup Plant Flare panels and cables

Installs,MCC’s, .

2018 – 2019 CLAYTON, NC

2015 – 2018 FREEPORT/BAYTOWN, TX

ELECTRICAL FOREMAN/COMMISSIONING/JOURNEYMAN, fluor

Performed leadership duties, managed and supervised crews in the field with experience in semi-skilled and un-skilled laboring duties to include but not limited to: installing/bending rigid/EMT/plastic-bond conduit, maintenance and repair of wide variety of electrical systems and hydraulic bending equipment and lighting installation at Industrial Plants. * Measure, cut, bend wire and conduit using measuring instruments and hand tools. * Install and terminate JB Panels for instruments and rack-in/rack-out MCC power breakers and panel conductor wires 480,120/110,240/277 panels and flow transmitters, pressure transmitters, electrical switch racks, temperature transmitters, motors, transformers, rectifier panels, 3/c phase rejacketing, typed TC connectors, stress cones, motor lead pigtail/v-stud splice series. * Examine electrical units for loose connections and broken insulations and tighten connections using hand tools. * Strip insulations from wire ends using wire stripping tool and attach wire to terminals for subsequent soldering. * Disassemble defective electrical equipment, replace defective or worn parts, reassemble equipment, and wire testing voltage w/voltmeter, megger before installing raceway cabinets and J-Boxes and substations SG.

2014 – 2015 DEER PARK, TX

JOURNEYMAN ELECTRICIAN, kbr/iti/isc conductor

Performed semi-skilled and un-skilled laboring duties related to installing/bending EMT/rigid conduit, maintenance and repair of a wide variety of electrical systems and hydraulic bending equipment and lighting installations of Industrial Plants. * Measure, cut, bend wire and conduit using measuring instruments and hand tools. * Install and terminate JB Panels for instruments and 480,120,110 panels and flow motors, transformers, clarifier motors, cable tray, rectifier panels, terminate PV pressure valves and other Instruments. * Examine electrical units for loose connections and broken insulations and tighten connections using hand tools. * Strip insulations from wire ends using wire stripping tools and attach wire to terminals for subsequent soldering. * Electrical switch rack Installations, instrument terminations, start/stop switches, lighting panels and connection/supports other etc. * Wire testing voltage with volt meter and testing larger wire with a megger and before installing into bucket terminations, setup I-Panel, raceway cabinets/J-Boxes at substations and MCC. * Disassemble defective electrical equipment, replace defective or worn parts and reassemble equipment using hand tools.

2012 – 2014 FREEPORT, TX

JOURNEYMAN ELECTRICIAN/ELECTRICAL WIRE FOREMAN, EXCEL

Installing lighting and conduit bending, stanchion light on Industrial plants and cooling towers, termination panel areas. * Install and terminate 480 panels and flow motors, transformers, clarifier motors, cable tray, Hypochlorite Generators, rectifiers, 5kv, 4160 in MCC Substations. * Measure, cut, bend wire and conduit using measuring instruments and hand tools. * Installing network cable and fiber wire to cabinet for control room communications using Cat5, Cat6 wiring and Gia-Tronic communication data-telephone terminations, temp-heat trace wiring, 2pair16, 20pair, 1pair conductor wire. * Disassemble defective electrical equipment, replace defective or worn part, balance for lights and reassemble equipment using hand tools. * Stripping Insulation from wire ends termination wires and attaches wire terminals inside Lighting and Instrument panels. * Perform-semi skilled and unskilled laboring duties related to installing conduit, maintenance and repair of wide variety of electrical wire materials and field operations. * Wiring and testing telecommunication equipment for video, wireless and data network systems. MMDS Wireless Signal Broadband.

2011 – 2012 PORT ARTHUR, TX

LEAD JOURNEYMAN ELECTRICIAN, IES ELECTRICAL

Installed and terminate light control panels and work on switch racks, start and stop switches and terminate Fare panel connections, cut and action of fabricate materials conduit and supports. * Installed JB for power and terminated 480,120,110 wiring and loop instrument connections for PT, TT and FT equipment. * Install lighting inside substations, MCC and surrounding areas on Industrial Plants. * Installed circuit breakers, power outlets, temporary power and lighting with source of grounding needed or added. * Leadership of construction switch rack being connected for disconnects, lighting, circuits, switches and motors. * Examine electrical units for loose connections and broken insulation and tighten connections and testing with electrical equipment with hand tools. * Set transformers and connect wire for main power to substations. * Troubleshoot and test all electrical equipment before operating and startup. * Installing conduit, supports and termination of connection with specification.

20O8 – 2011 BORGER/RIESEL, TX JOURNEYMAN ELECTRICIAN, ZACHRY CONSTRUCTION

Temp power 3 phase connections, heat stress, 480, 420, 277, 110, 220 panels. * Perform semi-skilled and unskilled laboring duties related to installing/bending EMT/rigid conduit, maintenance and repair of wide variety of electrical systems and Hydraulic bending equipment. * Measure, cut and bend wire and conduit using measuring instruments and hand tools. * Disassemble defective electrical equipment, replace defective or worn parts and reassemble equipment using hand tools. * Examine electrical units for loose connections and broken insulations and tighten connections using hand tools. * Strip insulations from wire ends using wire stripping pliers and attach wires to terminals for subsequent soldering. * Installing lighting and terminating panels, data/tele Cat5 and Cat6 terms. * Installing RMC for Industrial Electrical Plants at SCPP in Riesel, TX. * Gia-Tronic Communications Data-Telephone termination system. * Terminate 100, 50, 25 pair connections and 110/66 block punch-down terminations.

2004 – 2008 HOUSTON, TX

COMMUNICATION TECHNICIAN III, COMCAST COMMUNICATION

Pre-wire single unit dwellings. * Inspect existing ground or make new ground according to the National Electrical Code (NEC). * Complete associated paperwork for every work order in a timely manner. * Ability to communicate with customers in a clear manner.* Climb poles and ladders 18 to 20 feet above ground and work on power line extenders and signed taps. * 60Hz power supplies, analyze, locate/repair video feeds, network data and voice technical field problems. * Complete Subscribers service calls and system related repairs including but not limited to drop and outlet wiring, digital converters, cable modems, digital phone terminals and tap replacement. * Perform periodic checks on amplifier levels throughout the cable systems to assure quality and stability of cable signals. * Service and maintain feeder systems and associated hardware and electronic components.

1994 – 2004 HOUSTON, TX

SUPERVISOR NETWORK OPERATION SPECIALIST II, SPRINT BROADBAND WIRELESS GROUP

Facilitator of all field issues pertaining to quality control, site surveying damage claims, training and job complications. * Assignment of installation orders and maintenance of daily calendar points and verification of all non-completed jobs. * Training of installers on RF and data technique, two way broadband signal/network cards and installing computer upgrades hardware. * Development of monthly schedules for installers, dispatch incoming and outgoing job completions. * Follow-up on all damages and customer complaints. * Wiring and testing telecommunication equipment for video, wireless data networking systems in commercial/residential as well as troubleshoot computers, 3com ether link 10/100 Mbps PCI network interface cards, USB hubs 4 ports, 8 ports and 16 ports. * MMDS wireless signal broadband, Cat5, Cat6 and cable installation. * MDU underground splicing 500/750 hardline wire. * Telephone line installation and repair, network punch-down panel terminations. * Installation wireless assemble 10ft to 50ft antennas on residential and commercial properties.

EDUCATION

1981 – 1984 CANYON, TX

West texas state university

Bachelor of arts degree

Major field of Study: Mass Communication in Radio and Television Broadcasting

SKILLS/CERTIFICATIONS

NCCER National Electrical Code Completion #7723741

TWIC Card/Osha 30 certification #36-601******

ISTC Industrial Safety Training Council

TDLR license

Network Signal Testing Technician

Certified Network Operation Specialist

Gia-Tronic Communication Certification Technician

JLG & Scissor Lifts, Hilti Qualified Operator License #4110300

Certified Installation and Repair

Certified Pole Climbing

Certified Wireless Broadband Installation and Repair Specialist communication

Contact this candidate