Instrument and Control Technician
Resume:
BALAURO, CHRISTOPHER PANIQUE
PRESENT ADDRESS
Lot No.19 Moses Compound Dao St.
Marikina Heights, Marikina City
Philippines 1800
*****.*******.****@*****.***
CAREER OBJECTIVE:
To apply as an Electrical and Instrument Technician and achieve comprehensive enhancement of knowledge and expertise through the proficiency, effectiveness and capabilities of a company. It is my foremost desire to impart and maximize my skills, principles and fundamentals. In addition, I am determined to absorb innovative skills in order to develop numerous abilities and perform versatile tasks.
SKILLS:
Can analyze Instrumentation Drawings such as Piping and Instrumentation Drawings (P&ID), Basic Instrumentation Drawing, Instrumentation Loop Diagram (ILD) and Process Flow Diagram (PFD).
Understand the Important of Instruments in controlling any Industrial Process Variable.
Knowledge in a successful Troubleshooting Procedures.
Knowledge in calibrating of different kinds of Process Instruments and Safety Instruments.
Knowledge in Zero – Checking of Transmitters.
Knowledge in Flow meter proving of a Mass Flow meter.
Knowledge in proper Tuning of Controller in the Process.
Knowledge in Loop Checking and Simulation.
Knowledge of the value of Leak Testing, Hydro Testing, and Solenoid Testing.
Know the purpose and how to use a HART communicator.
Knowledge how to use Beamix MC2-IS
Knowledge in using Beamix Dry Block
Can Handle Several Machines (lathe, milling, drill press, gear cutter, etc)
Can use precision measuring instrument.
Knowledge on Microsoft Office Programs and designing through Auto Cad.
Can understand hydraulics symbols and its process.
OTHER POINTS:
Can establish the probable limits of error that can be expected.
Motivated to job responsibilities and have willingness to learn.
Can easily adjust to new environment.
Can perform jobs well.
Can socialize to other people.
EMPLOYMENT:
Excellens Recruitment Management Resources Inc. August 2018-October 2019
Akemi/ Zenith Plant
355 Gen. Ordonez Ave.Parang Marikina Phillipines
Line Maintenance
●Maintaining the good production output of machine in line.
●Performed routine checkup of machines such as Bamburry, Kneader Machine, Rollers, Calendar Machine, Single and Multiple Cutting Machine.
●Changing Blade of Groving machine and adjustment of length of output.
●Adjustment of pressure of single and multiple cutting machines to secure of good cutting output.
●Monitoring of temperature of oven for making of rubber blocks.
●Adjust of arm support for multi press in assemble area.
●Check of sequence in machine operation.
EMPLOYMENT:
Babcock Borsig Service Arabia December 2016 - April 2018
Saudi Electricity Company Shoaiba Power Plant
Jeddah Saudi Arabia
Instrument and Control Technician
●Performed routine repair, calibration and maintenance work such as lubrications, fabrications, parts cleaning, instrument and control repair, assembling, disassembling complex parts.
● Installation, testing, calibration, troubleshooting, adjustment and maintenance of all types of instrumentation and control circuits and devices used in the plant.
●Execute scheduled calibrations on instrumentation and control devices in compliance with facility procedures and work instructions. Maintained and restored critical production status by performing preventive and corrective maintenance
● Perform paperwork necessary for preparation and closeout of assigned tasks.
●Resolve plant requests for assistance with variety of power system related maintenance and operation issues.
●Troubleshoot and repair general instrument including various pressure, temperature, level, and flow sensing devices.
●Inspects tests, adjusts and repairs electric, electronic, mechanical and pneumatic instruments and systems used to indicate, record, and control generating operations in power electric generating plant: Inspects meters, indicators, and gauges to detect abnormal fluctuations.
●Remove defective instruments from system, decontaminates, disassembles, and cleans instruments, and replaces defective parts, using hand tools.
●Reassembles instruments and replaces instruments in system, using hand tools.
●Lubricates instruments and replaces defective wiring and tubing.
●Calibrates readings on instruments according to standards and adjusts phasing and aligns stages to ensure accuracy of recording and indicating function.
●Checking of Instruments in burner system such as flame scanner, igniter, tilting dampers, burner cameras, auxiliary dampers and shut off valves.
●Checking, dismantling and assemble of burner gun system.
●Termination and installation of new burner gun system.
●Checking for air leak and over hauling of shut off valves such as burner atomizing steam shut off valves, purging steam shut off valves and shut off valve crude or heavy fuel oil burner.
●Check of air leakage and changing of air regulators.
●Check and calibration of Pressure gauges in burner system.
●Checking and calibration of parameters of control valve positioner.
●Check of leakage in auxiliary damper and simulation of its position.
●Simulation of tilting damper and calibrate its position.
●Cleaning, checking and calibrating of air dampers.
●Check, clean and calibrate of level, flow and pressure transmitters.
●Calibration of pressure switches of air blow tank.
●Check, clean and calibrate of level transmitters of conveying blow tanks in ESP area.
●Check and calibrate of temperature switches of conveying blow tank.
●Check of leakage and over hauling of shut off valves and dampers in ESP area.
●Validation of Resistance transmitter detector on the FDF IDF RDF area.
●Check, clean and calibrate of temperature gauges.
●Clean and check of vibration sensors.
TRIGON / ATS Construction International, Inc. February 2015- May 2016
AG&P ICHTHYS ONSHORE PROJECT
PPA road Batangas City, Yard 2 of AG&P
Electrical & Instrument Technician
●Responsible in installing trays and arranging the cable for preparation for Glanding and Termination.
●Responsible in Glanding the cables and terminating to the panel or Junction Boxes.
●Installing and termination of Lightings, Smoke Detector, Alarm System and PAGA (Public Address and General Alarm) system.
●Successfully and safely installed various types of pressure transmitters, temperature transmitters, flow transmitters, and pneumatic instrumentation onto oil and gas modules
●Installation of Flood Light support, Install Flood Lights and Glanding and Terminations of Flood Light System.
●Installation of MCT (Multi-Cable Transit) on panels and outlet of modules.
●Responsible in wire check and loop check of instruments.
●Estimated the time and materials costs required for projected jobs keep cost and job records and submitted reports initiate requisition for supplied tools and equipment.
●Responsible in clearing the punch list.
●Displayed advanced knowledge of job safety analysis procedures and worked safely without incident in production area
Atlantic, Gulf & Pacific Company of Manila Inc. September 2012 - July 2014
BECHTEL GLNG PROJECT
San Roque, Bauan Batangas Yard 1 of AG&P
Electrical & Instrument Technician
●Responsible in installing trays and arranging the cable for preparation for Glanding and Termination.
●Responsible in Glanding the cables and terminating to the panel and junction box.
●Responsible in Glanding the cables and terminating of Lightings Fixtures.
●Estimated the time and materials costs required for projected jobs keep cost and job records and submitted reports initiate requisition for supplied tools and equipment.
●Responsible in wire check and loop check of instruments.
J. CHAVEZ Construction & General Services May 2011 - June 2012
Ilijan, Batangas City
Electrician
●Performed fabrication of all the electrical supports such as lighting, conduits cable tray and local control panels.
●Performed termination of incoming and outgoing power cables of panel board transformer, motor, generator junction boxes and terminal boxes.
●Performed cable pulling of instrument low and medium voltage power and control cables.
●Estimated the time and materials costs required for projected jobs keep cost and job records and submitted reports initiate requisition for supplied tools and equipment.
AUJAN INDUSTRIES February 2010 – March 2011
Dubai Investment Park, Dubai UAE
Trainee Operator and Trainee Line Mechanic
●Knowledge in handling different machine in the production lines.
●Operating the assigned machined in a safe and efficient way.
●Observing the machine if its properly working.
●Putting lubricant on machine and checking of machines process.
●Knowledge in proper troubleshooting when the lines have a problem and analyzing the root of the problem.
●Assistance to the Senior Line Mechanic in doing any jobs such as repairing and maintaining different machine in the line.
●Checking and replacing the gears in in the gear box when shut down occurs.
●Dismantling the plate in order to clean and check if needed to b replace.
●Cleaning and repairing of damage gears in the filling machine and bottling machine.
CBN Construction and Supply June 2008 – February 2009
Bucros Dacu, La Carlota City, Negros Occidental, Philippines
Plumber Assistant
●Assisting the Plumber in calculating the path and assembling the proper waste disposal in the project in the grandstand at M.Y. Torres Sports Complex, in Bago City Negros Occidental.
EDUCATIONAL LEVEL BACKGROUND:
Tertiary
:
Technological University of the Philippines – Visayas
Talisay City, Negros Occidental
Under Graduate in Bachelor of Science in Mechanical Engineering
2009-2010
Graduate in Mechanical Engineering Technology
2005-2008
Secondary
:
Negros Occidental High School
Araneta Street, Bacolod City, Negros Occidental
2001-2005
TRAINING AND SEMINAR ATTENDED:
●IELTS ( General Training) 13/Feb/2020
Candidate Number - 018677
Overall Bound Score - 6.5
Listening - 8.0 Reading - 6.0
Writing - 6.0 Speaking - 6.0
●I&E Instrumentation Training Center
BATCH 31 Week Day Class
I&E Compound, 788 Takad, Libjo Batangas City, 4200 Philippines
April 08, 2014 – November 03, 2014
Instrument Technician
(Industrial Instrumentation and Process Control Training Course)
Trained to become an efficient Instrument Technician.
Trained and learned the Basic Fundamentals of Instrumentation, Instrumentation Symbols and Instrumentation Drawings.
Trained and learned basic protection layers of safety, Fire and Gas Detection System.
Trained and learned the basic tuning of process controllers as well as instrument and equipment troubleshooting, validation, calibration and servicing.
Trained and learned the flow meter proving, control valve leak test, hydro test, calibration and maintenance, basic tubing fitting handling and installation, cable glanding and termination, transmitter zero checking, loop checking and simulation and observed on how to use a HART communicator.
●Laguna Auto Parts Manufacturing Corporation (LAMCOR)
Sta. Rosa, Laguna
Line Mechanic (Supervised Industrial Training-3 December 2007-June 2008)
Worked as a line mechanic in Stator 3 Area Model 626.
●Roxas Provincial Engineering Office
Capiz Roxas, Iloilo
Trainee Mechanic (Supervised Industrial Training-2 April-May 2007)
Trained to maintained and repair the Government Vehicle in the Province of Roxas.
●SAGAY CENTRAL INCORPORATED
Sagay City, Negros Occidental
Trainee Lathe Machinist (Supervised Industrial Training-1 April-May 2006)
Trained to machine any work piece that is needed in the mechanical and other departments
PERSONAL DATA:
AGE
: 31
GENDER
: Male
DATE OF BIRTH
: January 5, 1988
PLACE OF BIRTH
: Bacolod City, Negros Occidental
NATIONALITY
: Filipino
CIVIL STATUS
: Single
LANGUAGE
: English, Tagalog, and Hiligaynon
REFERENCE:
Fil Sonido
General Manager
I&E Industrial systems services, Inc.
723-0238 loc. 105
Bren Crisostomo
Super Intendent
TRIGON Management and Industrial Corporation
This is to certify that all information stated above is in my true and honest knowledge and being.
CHRISTOPHER BALAURO
Contact this candidate