Gary Mills

419-***-****

admco9@r.postjobfree.com

OBJECTIVE:

Things I can bring to your company are working together as a team teaching others how to perform jobs better in performance and quality and show how to take any job to work threw the problem solving issues

EXPERIENCE:

8/2019 - 11/2019 Premier roof systems Inc Wadsworth, Ohio Industry: Construction - Residential & Commercial/Office Roofer

Inspect problem roofs to determine the best repair procedures. Remove snow, water, or debris from roofs prior to applying roofing materials.

Set up scaffolding to provide safe access to roofs. Estimate materials and labor required to complete roofing jobs.

Cement or nail flashing strips of metal or shingle over joints to make them watertight. Install partially overlapping layers of material over roof insulation surfaces, using chalk lines, gauges on shingling hatchets, or lines on shingles.

Cut felt, shingles, or strips of flashing to fit angles formed by walls, vents, or intersecting roof surfaces.

Install, repair, or replace single-ply roofing systems, using waterproof sheet materials such as modified plastics, elastomeric, or other asphaltic compositions. Waterproof or damp- proof walls, floors, roofs, foundations, or basements by painting or spraying surfaces with waterproof coatings or by attaching waterproofing membranes to surfaces.

Attach roofing paper to roofs in overlapping strips to form bases for other materials. Apply reflective roof coatings, such as special paints or single-ply roofing sheets, to existing roofs to reduce solar heat absorption. Install vapor barriers or layers of insulation on flat roofs.

Cover exposed nailheads with roofing cement or caulking to prevent water leakage or rust. Smooth rough spots to prepare surfaces for waterproofing, using hammers, chisels, or rubbing bricks. Install attic ventilation systems, such as turbine vents, gable or ridge vents, or conventional or solar-powered exhaust fans.

Spray roofs, sidings, or walls to bind, seal, insulate, or soundproof sections of structures, using spray guns, air compressors, or heaters.

10/2018 - 10/2019 Mcferren contracting Ontario, Ohio Industry: Construction - Industrial Facilities and Infrastructure Construction Worker / Technician

Checking to ensure that completed roofs are watertight

Sweeping and cleaning roofs to prepare them for the application of new roofing materials

Locating worn or torn areas in roofs that may cause leak areas

Conducting roof maintance and repairs

Instaling single ply membranes (TPO, PVC, EPDM)

Covering roofs with layers of roofing felt or asphalt strips before spraying, coating or installing tile, slate, and composition materials

I'm motivated,have ethics I'm divirsital

Removing old roofing materials

Unloading materials and tools from work trucks, and unrolling roofing as directed

Reporting to warehouse or job site as designated by supervisor on time

Following RoofCARE procedures and policies

Following OSHA/RoofCARE safety regulations, policies, procedure.

Clean or prepare construction sites to eliminate possible hazards. Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials. Read plans, instructions, or specifications to determine work activities. Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.

Measure, mark, or record openings or distances to layout areas where construction work will be performed. Install sewer, water, or storm drain pipes, using pipe-laying machinery or laser guidance equipment.

Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes.

Mix ingredients to create compounds for covering or cleaning surfaces. Mix, pour, or spread concrete, using portable cement mixers.

Erect or dismantle scaffolding, shoring, braces, traffic barricades, ramps, or other temporary structures.

Provide assistance to craft workers, such as carpenters, plasterers, or masons. Position, join, align, or seal structural components, such as concrete wall sections or pipes. Grind, scrape, sand, or polish surfaces, such as concrete, marble, terrazzo, or wood flooring, using abrasive tools or machines.

Position or dismantle forms for pouring concrete, using saws, hammers, nails, or bolts. Spray materials, such as water, sand, steam, vinyl, paint, or stucco, through hoses to clean, coat, or seal surfaces.

Apply caulking compounds by hand or caulking guns to protect against entry of water or air. Smooth or finish freshly poured cement or concrete, using floats, trowels, screeds, or powered cement finishing tools.

Mop, brush, or spread paints, cleaning solutions, or other compounds over surfaces to clean them or to provide protection.

Operate jackhammers or drills to break up concrete or pavement. Raze buildings or salvage useful materials.

Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.

Perform construction laborer duties at green building sites, such as renewable energy plants or wind turbine installations. Transport or set explosives for tunnel, shaft, or road construction.

1/2000 - 1/2017 G@T Home Improvements Mansfield, Ohio Industry: Construction - Residential & Commercial/Office Supervisor

Inspect problem roofs to determine the best repair procedures. Remove snow, water, or debris from roofs prior to applying roofing materials. Estimate materials and labor required to complete roofing jobs.

Install partially overlapping layers of material over roof insulation surfaces, using chalk lines, gauges on shingling hatchets, or lines on shingles.

Cut felt, shingles, or strips of flashing to fit angles formed by walls, vents, or intersecting roof surfaces.

Apply plastic coatings, membranes, fiberglass, or felt over sloped roofs before applying shingles. Install attic ventilation systems, such as turbine vents, gable or ridge vents, or conventional or solar-powered exhaust fans. Signal equipment operators to facilitate alignment, movement, or adjustment of machinery, equipment, or materials.

Read plans, instructions, or specifications to determine work activities. Load, unload, or identify building materials, machinery, or tools, distributing them to the appropriate locations, according to project plans or specifications.

Measure, mark, or record openings or distances to layout areas where construction work will be performed. Dig ditches or trenches, backfill excavations, or compact and level earth to grade specifications, using picks, shovels, pneumatic tampers, or rakes. Mix, pour, or spread concrete, using portable cement mixers.

Tend machines that pump concrete, grout, cement, sand, plaster, or stucco through spray guns for application to ceilings or walls.

Apply caulking compounds by hand or caulking guns to protect against entry of water or air. Operate jackhammers or drills to break up concrete or pavement. .

Perform building weatherization tasks, such as repairing windows, adding insulation, or applying weather-stripping materials.

Clean work areas, machines, or equipment, to maintain a clean and safe job site. Perform tie spacing layout and measure, mark, drill or cut. Select tools, equipment, or materials from storage and transport items to work site.

Drill holes in timbers or lumber. Cut timbers, lumber, or paneling to specified dimensions. Position and hold timbers, lumber, or paneling in place for fastening or cutting.

Align, straighten, plumb, or square forms for installation. Hold plumb bobs, sighting rods, or other equipment to aid in establishing reference points and lines.

Erect scaffolding, shoring, or braces. Construct forms and assist in raising them to the required elevation.

Install handrails under the direction of a carpenter. Cut tile or linoleum to fit and spread adhesives on flooring for installation. Measure materials or distances, using square, measuring tape, or rule to lay out work.

Study blueprints and diagrams to determine dimensions of structure or form to be constructed. Maintain job records and schedule work crew. Review blueprints, building codes, or specifications to determine work details or procedures. Estimate time,.

1/2000 - 1/2006 Stewart drywalling Mansfield, Ohio Industry: Construction - Residential & Commercial/Office Sub contractor

Hanging@finishing drywall hand tools,boxes stuff tubs,spot screws,taping,bed@skim coats,different testers,sanding also roofing tare off@replace shingles,dripedge,ridge caps,flashing felt paper also siding f,c channel,cutting and hanging measuring to cutting starter stripes and interior to exterior painting and building decks EDUCATION: Pioneer welding US-Shelby

Vocational

Contact this candidate