Lead Design Engineer Electrical
Resume:
Mohammed Al Wadeya
Mobile: +971********* E-mail : *********@*****.***
Summary of
Qualification
** ***** ** ********** ** PMC / EPC roles in Electrical Detailed Engineering, FEED, Tendering, Proposals, Site support, pre-commissioning and commissioning support (Greenfield & Brownfield Oil & Gas projects). Proficient in electrical equipment, and developing engineering and design deliverables including scope of work, design basis, specifications, calculations, drawings, lists, control schematics, Vendor Drawings Review for different electrical equipment including HV & LV Switchgears, Electrical Control System
(SCMS/FMS/OLCMS), Transformers, UPS, Busduct, Diesel Generators, NER, VFD, Overhead Transmission Lines, Heat Tracing System, Solar systems, etc. Review of power system study. Worked with different international standards and specifications including IEC, IEEE, ANSI, ADNOC Onshore, ADNOC Offshore, ADNOC Gas Processing, and Al Hosn Gas.
Skills / Proficiency
PMC at ADNOC ONSHORE:
Review of Tender Package and FEED Verification
Preparation of Gap Analysis Report for FEED package
Interface with PMT and EPC Contractors.
Review and respond to Bidder’s Technical Clarifications and Qualifications.
Preparation of Tender Bulletins
Technical clarification meetings with Bidders
Technical Bid review and scoring
TBE Preparation and review
Update Scope of work and pricing schedules
Official Letter preparation (Deviation, NCR, Variation order, etc.) EPC Contractor:
FEED Verification
Tendering and Proposals
Site Survey
Design and review of overall and detailed single line diagrams for 33kV, 22kV, 11kV, 6.6kV, 3.3kV and LV substation systems including protection functions, changeover logics, transformers, UPS, etc.
Preparation of load calculations and load/feeder list consisting of electrical equipment from mechanical load list and P&IDs
Preparation of HV & LV cable sizing and cable schedule
Preparation of typical control schematics and connection diagram / block diagram for different types of feeder circuits (in HV and LV switchgears), Lighting DBs, Small power DBs, UPS DBs, MOV DBs for the vendor input purpose. Design of protection & control schemes including interlocks.
Selection & Sizing of various LV & HV Electrical Equipment Including Transformer, Diesel Generator, Switchgear, NER, Circuit breaker, bus duct, Battery & UPS system, PF Correction capacitor, cables … etc.
Preparation of lists and schedules including Load List, Cable schedule, Equipment list, LV switchgear schedule, and DB schedule depending on their load requirement.
System architecture for Electrical Control System (SCMS/OLCMS/FMS) involving number of substations and their FO connections. Further development of I/O list for different types of feeders/equipment.
2 of 5
Vendor drawing review for various electrical equipment like HV/LV switchgear, Electrical Control System, Transformer, UPS, Generator, LCS, DBs, NER, VFD, Overhead Lines, Heat tracing systems, Solar systems, Bulk Material, etc.
Development & preparation of substation equipment layout, transformer/generator foundation layout.
Preparation of interconnection diagrams/schedules.
Preparation & Modification of Specifications for Electrical Equipment.
Preparation of Datasheets for Electrical Equipment.
Modular substation design and sizing for all electrical equipment
Generating all types of layouts including Hazard Area Classification, Lighting layouts, earthing layouts, cable routing, etc.
Review of power system study reports.
Familiar with different international standards including IEC, IEEE, ANSI, ADNOC Onshore, ADNOC Offshore, ADNOC Gas Processing, Al Hosn Gas, and other standards used in oil and gas industries.
Issue the material requisitions for electrical equipment & material.
Technical bid evaluation for electrical equipment.
Supplier pre-award & clarification meeting.
Issue the technical part of purchase order.
Review of Vendor documents for Electrical equipment, and other disciplines like Instrument and Mechanical, etc.
Inspection & testing of electrical equipment in Vendor factories.
Site support during construction, pre-commissioning and commissioning phase of project.
Professional
Experience
PENSPEN International Limited, Abu Dhabi
Electrical Senior Engineer (PMC) - ADNOC ONSHORE ( 2020- up to date)
Review of Tender Package and FEED Verification
Preparation of Gap Analysis Report for FEED package
Interface with PMT and EPC Contractors.
Review and respond to Bidder’s Technical Clarifications and Qualifications.
Preparation of Tender Bulletins
Technical clarification meetings with Bidders
Technical Bid review and scoring
TBE Preparation and review
Update Scope of work and pricing schedules
Official Letter preparation (Deviation, NCR, Variation order, etc.) Projects
SAHIL Phase III
Replacement of Aged Electrical Equipment
SHAH Water Handling packages
Consolidated Contractors Engineering Limited (CCEL), Abu Dhabi Electrical Senior Engineer (Acting as Lead Engineer) ( 2018- 2020)
FEED Verification
Proposals
Site Survey
3 of 5
Man-hour Estimation
Preparing engineering deliverables list
Review & monitor Project progress (Electrical section)
Work delegation to project team (Electrical)
Interface with PMC.
Official Letter preparation (Deviation, NCR, Variation order,etc.)
Preparation and review of Electrical deliverables
Review of Vendor offers
TBE Preparation and review
Helping procurement team during vendor negotiation (Price reduction)
Vendor document review
FAT, IFAT, and support for SAT, ISAT
Projects
Zirku Facilities capacity enhacement - train-5 (Client : ZADCO - ADNOC Offshore) Chiyoda CCC Engineering Limited (CCEL), Abu Dhabi Electrical Senior Engineer (Acting as Lead Engineer) ( 2015- 2018)
FEED Verification
Proposals
Site Survey
Man-hour Estimation
Preparing engineering deliverables list
Review & monitor Project progress (Electrical section)
Work delegation to project team (Electrical)
Interface with PMC.
Official Letter preparation (Deviation, NCR, Variation order,etc.)
Preparation and review of Electrical deliverables
Review of Vendor offers
TBE Preparation and review
Helping procurement team during vendor negotiation (Price reduction)
Vendor document review
FAT, IFAT, and support for SAT, ISAT
Projects
12 wells Gas Gathering Project - GG12 (Al Hosn Gas) Consolidated Contractors International Company (CCIC), Abu Dhabi Electrical Senior Design Engineer (2013- 2015 )
Engineering Design to GASCO/Al Hosn Gas standards
Preparation of man-hours estimation
Generation of Engineering Deliverables
Meetings with Client
Reporting to engineering manager
Support & guidance to junior engineers & draftsmen
Review & evaluation of vendor offers
Site survey
Support for Construction & pre-commissioning
4 of 5
Electrical Design Engineer ( 2009- 2013)
Engineering Design to GASCO/Al Hosn Gas standards
Technical requirements, Datasheets, MR, Technical Bid Evaluation, Scope of work for Different Electrical Equipment
Design deviation
Review & evaluation of Vendor offers
Switchgears, Transformers, PMS, Overhead lines, Skin Effect Heat Tracing for Sulphur Pipes, DBs
Vendor Documents (review/Approval)
FAT
Support for Construction & pre-commissioning
Jr. Electrical Design Engineer ( 2007- 2009)
Engineering Design to QP Specifications
Issuing Engineering Documents for approval / Review with PMC
Cable trenches layout,Cable entry layout
Technical Requirements, Specifications, Datasheets, Material Requisition,Technical Bid Evaluation, I/O List,Cable Schedule, interconnection Diagrams, Bulk materials, trench layout
Designing earthing network and calculations
Vendor documents (review/Approval)
FAT for different systems: Switchgears, Ring Main Units, transformers
Support for Construction & pre-commissioning
Projects
MULTIPURPOSE ADMINISTRATION PROJECT – QATAR, client (QP).
SHAH SULPHUR RECOVERY AND TRANSPORT (0.6 B$), client (AL HOSN).
Habshan Flare Gas Recovery (HFGR) project, client (GASCO).
RAS LAFFAN PORT EXPANSION (RLPEP) (2 B$), client (HOSN).
ALKHAFJI JOINT OPERATION (KJO)(0.6 B$), client (ARAMCO). Education
Bachelor of Science. Electrical Engineering, Faculty of engineering, American University of Sharjah, Sharjah, UAE, with honors and an accumulative GPA of 3.57
(2007).
Dean’s list for Fall 2005, Fall 2004, Spring 2003.
Scholarship during all education period because of the high GPA and rewards for being on the Dean's List.
Graduation Project: Design of Land Mine detection with an Excellent grade. Certification
Relay Protection and Fault Analysis for Modern Power Systems Training &
Courses
Inhouse Training in Electrical Design Engineering, CCC, Abu Dhabi, UAE – 2007
Procurement Management
Leadership in Action
Communication Skills in Meeting, Writing, Presentation, Conflict Solutions
Time Management, CCC, Abu Dhabi, UAE – 2019/2020
Delegation, CCC, Abu Dhabi, UAE.
Problem Solving, CCC, Abu Dhabi, UAE.
Teamwork, CCC, Abu Dhabi, UAE.
5 of 5
Engineering
Softwares
ETAP, Calculux lighting software
Proficient in the use of various computer software including all Microsoft Office components.
Language
Arabic, English
Awards
Personal
information
Certificate of Recognition - Best Team (GG12 project) – 2016
Date of Birth : April. 19th, 1985
Place of Birth : Abu Dhabi.
Nationality : Palestinian.
Marital Status : Married.
References are available upon request
Contact this candidate