K.Durga (MEP Engineer)

SEWA Consultant Electrical Engineer - Grade 4 •Mob: +91-959*******

Total Experience: 10 years E MAIL:adm21j@r.postjobfree.com

Address: INDIA, Chennai

Career Summary:

Having 10 years of experience in MEP Consultant Engineer in Buildings and Villas, On-Shore and Off-Shore Platforms, Front-End Engineering and Design, Waste water treatment plant with multi-functional experience as electrical engineer with management, scheduling and planning in accordance with total quality management system.

Has extensive experience of exercising supervisory control over personnel and providing guidance and assistance to them. I also have a track record of ensuring the smooth and orderly flow of delivering and scheduling activities.

Software Knowledge:

Autocad 2010 to 2018, Revit 2018, Photoshop 5, SKM 7.0, Etap 7.0, Dialux and Calculux, Ms-Office.

Professional Experience:

To prepare Electricity, Water, Gas, Etisalat, Civil Defence and Drainage drawings and take approval from SEWA, Sharjah Municipality, SEWA, Civil Defence and Hamriya Municipality.

Site visited and according to make shop drawings and took approval.

To prepare the Deliverable list .

Preparation and Review of Datasheets, Material Requisitions, Review of vendor documents, Technical Bid Analysis for Field Equipment’s and Packaged Items.

Technical specifications and requisitions in coordination with other disciplines for Packaged Items

Layouts and Drawings -Key Single line Diagram, Lighting Layout, Ear thing Layout, Cable Ladder/ Tray routing Layout, Equipment Layout.

List-Electrical Motor List, Electrical Load List, Cable List and Equipment List.

Schedule-Power and Control Cable Schedule, Lighting Cable Schedule and Lighting Panel Schedule.

Calculation- Electrical Cable sizing calculations, Generator Sizing Calculation, Transformer Sizing Calculation, UPS Sizing Calculation, Battery Sizing Calculation, Inverter Sizing Calculation, Cable Tray and Trench Sizing Calculation, Bus bar Sizing Calculation, Fuse and MCCB Sizing Calculation, Ear thing Sizing Calculation.

Electrical Bulk Material Take-off.

Lighting Modeling using Dialux 4.10 and 4.13 version software.

Electrical Software : E-Tap 12.5, SKM 6.0 and AutoCAD 2010 to 2018.

Work Experience:

FROM

TO

COMPANY NAME

POSITION

LOCATION

07.07.2017

till

Al Marija Engineering Consultants

MEP Engineer

UAE

05.12.2016

09.05.2017

AMEC Foster Wheeler

Electrical Engineer

India

20-11-2013

02.12.2016

VP Petro6 Engineers & Consultants Pvt. LTD

Electrical Engineer

India

29.08.2012

28.02.2013

CDM Smith Pvt. ltd

Electrical Engineer

India

20.09.2010

24.08.2012

VP Petro6 Engineers & Consultants Pvt. LTD

Electrical Engineer

India

Education

Institution Name

University

Specialization

Year of Passed Out

Percentage

Coimbatore Institute of Technology

Anna University

Bachelor of Electrical & Electronics Engineering

2010

79%

Pallavan Polytechnic College

Directorate of Technical Education

Diploma of Electrical & Electronics Engineering

2007

94.4%

Technical Skills

●Familiar with IS & IEC Standards.

Academic Achievements

●Third rank in First year at Pallavan Polytechnic College.

●Over all First rank in Electrical Department at Pallavan Polytechnic College.

Projects Handled

Electrical Engineer July 2017-Till now

Al Marija Engineering Consultants - Sharjah, UAE.

Abdullah Najam Qassem, G+4 + Penthouse Commercial building, MOHAMED HASSEN ALI KUNAR ALJUSMI Ground floor villa project, ALI ABAS ALI KUNAR ALJESMI G+1 Project, Ali Obaid Saif Alzuwain Al Mheiri Ground floor villa project, Salim Saeed Bilal Sadoun G+1+Kitchen Block project, Ahmed Ali Mohamed Hassan Alhammadi Ground floor villaProject, Yousaf Yaseen Hameed Ghanim G+ 1 +Kitchen block project, Fatima Hamd Al Mahrzi G+1 project etc...

Al Marija Engineering Consultants offer consultancy, engineering, project management, operations and construction services, project delivery and specialized power equipment services to our clients Sharjah.

Work as Electrical Engineer: Responsible for providing teamwork, management and ensuring the organizational effectiveness of the team.

Responsibilities:

Prepare the drawings for Electricity, Water, Gas, Etisalat and Drainage according to Sharjah Standards.

To open file in SEWA office and submit the drawings for Electricity, water and Gas.

Through online submit Etisalat drawings and take approval.

For drainage approval discussion with concerned Engineer in Sharjah and Hamriya municipality to take approval.

For Fire and Safety Drawings take approval from Civil Defence.

Electrical Engineer Dec 2016-May 2017

Amec Foster Wheeler - Chennai, India.

Petrom Project, S2 ESP VFD Skid Project, Kearl Oil Sands Project, Cenovus Energy.

Amec Foster Wheeler offer consultancy, engineering, project management, operations and construction services, project delivery and specialized power equipment services to our customers worldwide. It also serve the Oil, Gas & Chemicals, Mining, Power & Process and Environment & Infrastructure markets globally and done some amazing projects in Canada, Italy, Singapore, India, Middle East etc.

Work as Electrical Engineer: Responsible for providing leadership, management and ensuring the organizational effectiveness of the team.

Responsibilities:

Study all input drawings and documents.

Prepare the deliverable list and estimate the man hour based on project requirement.

Motor list, Equipment list and Load list.

MTO for all Electrical Items.

Lighting and Earthling Layout.

Equipment Layouts

Electrical Equipment Specification.

Lighting Modeling using Dialux 4.13 software.

As – Built Jobs.

Electrical Engineer Nov 2013-Dec2016

Vp Petro6 Engineering and Consultancy - Chennai, India.

Provision of EPCIC and LEASING for LAYANG FPSO Facilities Project, JX Nippon Oil & Gas Exploration (Malaysia) Limited, Local Equipment Room (LER) for TAPIS B Brownfield Project, Umm Lulu Phase II Full field Development Project, CPOC Phase 3 (Off-Shore 3-Platforms),

Vp Petro6 Engineering and Consultancy provides one-step engineering solutions to Oil and Gas industry concentrating on Offshore Platforms, FPSO's, Pipelines, Jetties, and Onshore Receiving Terminals etc. He also did many projects in India, Australia, Singapore, Thailand, America and Middle East.

Work as Electrical Engineer: Study the project details and prepared the design basis, deliverable list with target schedule date. Because it’s very important to every project to time management and Client satisfaction to complete the task.

Responsibilities:

Review of Technical Documents and Understanding the Scope of work.

Preparation of Key Single line Diagram, Lighting Layout, Ear thing Layout, Cable Ladder/ Tray routing Layout, Equipment Layout.

Preparation of Electrical Motor List, Electrical Load List and Equipment List.

Preparation of Power and Control Cable Schedule, Lighting Cable Schedule and Lighting Panel Schedule

Preparation and Review of Datasheets, Material Requisitions, Review of vendor documents, Technical Bid Analysis for Field Equipment’s and Packaged Items.

Technical specifications and requisitions in coordination with other disciplines for Packaged Items

Preparation of Electrical Cable sizing calculations, Generator Sizing Calculation, Transformer Sizing Calculation, UPS Sizing Calculation, Battery Sizing Calculation, Inverter Sizing Calculation, Cable Tray and Trench Sizing Calculation, Bus bar Sizing Calculation, Fuse and MCCB Sizing Calculation, Ear thing Sizing Calculation.

Preparation of Electrical Bulk Material Take-off.

Lighting Modeling using Dialux 4.10 version software.

Load flow and Short circuit Calculation using ETAP 12.5 software.

Electrical Engineer Aug2012-Feb 2013

CDM Smith India Pvt. Ltd- Chennai, India

Charles F Anderson JR Pump station Rehabilitation Project, Marine Corps Base Camp Pendleton,St Johns Country Utility department.

CDM Smith India Pvt. Ltd is a professional service that provides basic, detailed engineering and construction monitoring/ supervision services for all types of project to diverse nature of clients – governments, private companies, industries, developers or contracting companies..

Work as Electrical Engineer: As an Electrical Engineer load flow calculation and short circuit calculation using SKM software. To analysis the Equipment rating.

Responsibilities:

Review and Study of Technical Documents.

Modeling the single line diagram using SKM Power tools.

Modeling and Analysis Load flow calculation and Short circuit calculation using SKM Power tools.

Preparation of Power and Lighting Cable Schedule.

Material take off for all Electrical Items.

Electrical Engineer Sep 2010-Aug2012

Vp Petro6 Engineering and Consultancy - Chennai, India.

3-CLAMP ON Detail Engineering, Gland stone Liquefied and Natural Gas Project, Sisi Nubi Phase 2B and Peciko Phase 7B development Project, Provision of Engineering Design of WHP8 & WHP9 development, Mangala Field Development Project Phase -2

Vp Petro6 Engineering and Consultancy provides one-step engineering solutions to Oil and Gas industry concentrating on Offshore Platforms, FPSO's, Pipelines, Jetties, and Onshore Receiving Terminals etc. He also did many projects in India, Australia, Singapore, Thailand, America and Middle East.

Work as Electrical Engineer: Study the project details and prepared the design basis, deliverable list with target schedule date. Because it’s very important to every project to time management, safety and Client satisfaction to complete the task.

Responsibilities:

Review of Technical Documents and Understanding the Scope of work.

Preparation of Key Single line Diagram, Lighting Layout, Ear thing Layout, Equipment Layout.

Preparation of Electrical Load List.

Preparation of Power and Control Cable Schedule, Lighting Cable Schedule.

Preparation and Review of Datasheets, Material Requisitions, Review of vendor documents, Technical Bid Analysis for Field Equipment’s and Packaged Items.

Technical specifications and requisitions in coordination with other disciplines for Packaged Items

Preparation of Electrical Cable sizing calculations, Generator Sizing Calculation, Bus bar Sizing Calculation, Fuse and MCCB Sizing Calculation, Ear thing Sizing Calculation.

Preparation of Electrical Bulk Material Take-off.

Lighting Modeling using Dialux 4.10 version software.

Load flow and Short circuit Calculation using ETAP software.

Languages:

Tamil

English

Hindi

Personal Information:

DOB: 12-NOV-1984 Marital status: Married

Visa: Company Visa Passport No: T8295530

Declaration:

I do hereby confirm that the above information given in these Curriculum Vitae is true to the best of my knowledge and Self- Confidence.

Place: UAE Yours Faithfully.

Date: K.DURGA

Contact this candidate