Engineer Electrical

Electronic Engineer

Personal information:

Name and Last Name: Emmanuel Yebra Duran

Age: 28 years old

Place of birth: Guadalajara Jalisco

Date of Birth: 12/07/92

Social Security Number: 04 12 92 37 33 7

Address: Cirrus #306, int 1, CP: 7624 Col. El Marquez.

Tel: 36-72-52-27

Cel: +52 *-**-**-**-**-**

Email: ********.*****.*@*******.**

Objective

Being part of a company in which I can put all my knowledge into practice, that gives me the opportunity to achieve all my goals, and that offers me the opportunity to grow in the work, personal, intellectual and humanly areas.

Work experience

(August 2019 to Actually)

Company name: Diehl Controls, Queretaro

Position held: Professional Hardware Test Engineer.

My tasks:

Coordinate and manage the laboratory.

Coordinate the hardware test plan.

Creation for safety and EMC/EMI compliance as well as hardware performance and reliability test for the hardware designed solutions.

Schedule and execute the test according to the hardware test plan.

Give support to the feasibility analysis to DTC.

Perform the application test.

Give support to EOL components.

Do mock ups and modifications to the testing boards in order to tune up specific circuits.

Main projects:

Give support to R&D area (Software and Hardware) in troubleshooting with the EMC tests.

Achievements

Collaborated in 3 troubleshooting, the first troubleshooting was for Mamba (Hardware issue), the second was for BSH (Software issue) and third was for BSH too (Hardware issue).

Made an EFT test procedure.

Made a conducted emissions test procedure.

Create the equipment calibration plan.

• Create the automatic reminders to equipment calibrations with a excel file.

Introduce the equipment verifications.

Create the ESD protection verification/maintenance plan to R&D.

(November 2017 – August 2019)

Name of the company: Continental Automotive Guadalajara.

Position held: EMC Test Engineer.

Experience: 3 years working in EMC area, I started as Intern, after 3 months I was contracted as EMC Test Technician I stayed as EMC Test Technician by 1 year and 6 months after this, I climbed from position to EMC Test Engineer.

My tasks: execute the following test:

• Electrostatic Discharges (ESD).

• Electrical test.

• Transients test.

• Bulk Current Injection (BCI).

• Radiated Emissions (RE).

• Conducted Emissions (CE).

• Radiated Immunity (RI).

Responsibilities: I am process owner for technologies of the BCI (Bulk current injection) and RI (Radiated Immunity), as process owner, I must make sure that the technologies work properly, I program and execute the quality checks.

I have done training manuals for ESD test, RI and BCI test. When my colleagues have a lot of work I help them to carry out tests of Transients, Electrical test, Radiated Emissions and Conducted Emissions, as well as when problems with equipment/software arise, I help solve them.

40% of my time is spent doing tests, 30% I dedicate to reviewing that the team works correctly and 20% dedicate it to helping my colleagues and the remaining 10% I dedicate to review the test reports and I review the clients' test plan to see if the laboratory has the capacity to execute the tests they need, as well as I give feedback when it is necessary to improve the test plan.

In the last year and 3 months I have collaborated in 3 troubleshoot with hardware engineers.

I write test reports and in some cases I help my boss review the test reports of my colleagues.

In the EMC laboratory of Continental, I have tested Clusters, ECU, Power train modules, LDM; I have done tests for FORD, FCA, GM, Volvo, Harley Davidson, PACCAR, etc.

Main projects:

Introduce the EMC test for FCA and GM (2018).

Achievements:

Obtain internal accreditation from the Lake Zurich Laboratory for the FCA and GM tests.

Maintain to A2LA accreditation for the EMC laboratory.

(July 2016 - November 2017)

Company name: Continental Automotive Guadalajara

Position held: EMC Technician Jr.

Tests that I ran

Electrostatic Discharge (ESD).

Electrical Test.

Transients pulses.

Conducted Emissions (CE).

My tasks:

50% of the time I was dedicated to perform tests according to international standards (ISO, SAE and CISPR), and the customer's test plan, 30% of the time I was dedicated to making test reports, the remaining 20% of my time was spent reading customer test plan to ensure that everything was fine, also I was dedicated to see if there were new tests to introduce.

Main projects:

Participated in the Employee Turnover project.

Achievements

Reduced the Employee Turnover from 13 % (2017) to 6.9% (2018) and 3.8% (Currently).

(May 2016 - July 2016)

Company name: Continental Automotive Guadalajara

Position held: Intern in EMC Laboratory.

My tasks: 40% of the time I dedicate myself to reading procedures and international standards, 40% of the time is spent doing electrical tests and ESD tests, the remaining 20% I was making reports

(March 2016 – May 2016)

Company name: Continental Automotive Guadalajara

Position held: Intern in Materials Analysis Laboratory.

My tasks: 50% of the time I was dedicated to perform analyzes such as: cross-sections, visual inspection with metallographic microscope and micro-VU, visual inspection with X-ray and force test, 30% of the time I gave support to engineers with analyzes such as: deformation of PCBS and chemical resistance, the remaining 20% I was devoted to making reports.

(October 2015 – March 2016)

Company name: Continental Automotive Guadalajara

Position held: Practitioner in the Materials Analysis Laboratory.

My tasks:

90% I provided support the engineers with their activities, helped in some analyzes, helped to make reports, optical inspection with X-ray / micro VU equipment and helped in PCBS deformation analysis, and the remaining 10% I used it to train on some analysis.

(December 2013 to July 2014)

Name of the company: EKH FURNITURE INDUSTRIES

Position held: Blacksmith Assistant

My tasks:

30% of the time I provided support in different processes, when it was necessary, the activities were drilling, cutting or deburring, 40% of the time I oversaw my process (the bending process) and the repair of molds and the 30 % of the remaining time. I spent with my direct boss analyzing the assembly of new products, the quantity of the order and the number of people that needed to have the order on time.

Experience abroad

(August 2017 – November 2017)

Company name: Continental Automotive Auburn Hills, Michigan

Busy charge: (Work trip).

Tasks performed: Provide technical support to EMC laboratories in Michigan, performing electrical tests, transients test and ESD test.

(June 2018 – July 2018)

Company name: Continental Automotive Auburn Hills, Michigan

Busy charge: (Work trip).

Tasks performed: Provide technical support to EMC laboratories in Michigan, conducting electrical tests and transients test.

(September 2018 – October 2018)

Company name: Continental Automotive Auburn Hills, Michigan

Busy charge: (Work trip).

Tasks performed: Training in Immunity tests (RI and BCI) as well as providing technical support in those tests.

Education:

Electronics Engineer (2017) University Centro de Enseñanza Técnico Industrial (CETI) Colomos- Zapopan, Jal.

Computer Technician (2010) High school Centro de Enseñanza Técnico Industrial y de servicios #14 – Zapopan, Jal.

Languages:

Spanish: native.

English: speaking 65%, writing 70%, reading 70%, listening 65 %.

Skills and tools:

I have knowledge in printed circuit design (PCB), interpretation of electrical diagrams, decision-making capacity, teamwork, adaptation to changes and initiative.

• Polishing machine.

• Horizontal / vertical tape saw.

• Moto tool.

•Multimeter.

• Oscilloscope.

• Signal generator.

• X ray machine.

• Strain gage equipment.

• Micro VU.

• Auto Wave.

• RDS.

• ESD generator.

• VDS 200N.

• UCS 200N100.

• EFT 200B.

• MPG.

• PFS.

• Electrometer.

• LCR meter.

• Modulated DC amplifier.

• Load Dump (LD 200N).

Power meter.

Spectrum analyzer.

Software

BAT-EMC.

TILE.

ISO.CONTROL.

EAGLE

Pads logics and Pads layout

Microsoft Word: Excel, Word, Power Point and Outlook.

Others

I have a learning facility.

Driver's license

Passport

Visa (B1/B2).

References:

Ernesto Ornelas. Cel: +52 1-33-11-38-522*

David Iñiguez. Cel: +52 1-33-14-65-013*

Eduardo Vega Cel: +52 *-**-**-**-**-**

Contact this candidate