Electrical Engineer Power Plant

Raja Rajappan R

Senior Engineer- Electrical & Instrumentation

Mobile: +973-********

Registration No: EPP/C4208/EL/01-B

E-mail: ************@*****.***

Career Objective

Seeking a challenging position in an emerging organization where my technical skills to explore more in the area of Electrical & Instrumentation Engineering through the mutual growth, every moment of work for company in achieving its goals with safe and quality manner. Summary

Senior Electrical & Instrumentation Engineer with more than 20 years of experience in handling end to end Electrical & Instrumentation activities in Petro chemical, Oil field, Building construction projects & maintenance.

Monitoring & controlling the day to day site Instrumentation & Electrical activities. Which is mentioned below

Installation, calibration and loop checking of the field instruments & control valves.

Erection of panels – DCS network and fibber optic panel, Emergency shutdown panel, Wireless system panel, power distribution panels, DCS Analogy & Digital Marshalling panels, Telecommunication panel & system cabinets etc.…

Electrical Load calculation, selection of Equipment’s (Transformers, Diesel Generators, MDB’s, SMDB’s, DB’s & RMU’s etc...)

Designing of Electrical panel room General arrangement drawing (Equipment drawing, Transformer bay, lighting, power circuit)

Erection & installation of Electrical Equipment’s, Electrical devices & cables (Transformer, Diesel Generator, switch gears, all kind of panels & mass fabrication equipment’s (Electrical & Instrumentation)

LV, MV & Instrumentation cable installation below and above ground.

11kV Transformer erection & support commissioning activities.

Yard maintenance & Projects Temporary facilities

Preparing the single line diagrams of electrical layouts

Excellent document skills (Preparation & submission of construction quality documents like MOS, JOB Plan, Dossier, loop folder & IRF)

Professional Qualification

Bachelor of Engineering with Electrical & Electronics(from 1996 to 1999) Bharathithasan University -Pudukootai

Technical Skills

Auto cad, MS office & SAP

Professional Experience

Currently working with

QURAH Electric Contracting (EDD Licence Holder) from January 2021 till to date Working as an Electrical Manager & advisor

Client: kartec – Marassi Galleria

Nasser S Al Hajri Corporation, Bahrain.

As Electrical & Instrumentation superintendent from July2017 to Dec 2020 Client: Alba pot line6, BAPCO & ASRY (1.5 million inch Dia fabrication shop) & Sepco III Responsibility

Daily Progress report reviewing with site Engineers & Planners

Contract negotiation and preparation PO

Deploy the manpower, Scheduling and monitoring the activities.

Daily make sure the Target got done and report to the Project Manager.

Preparation of job plan& method of statement, as project specification.

Mobilization of manpower, machine, equipment and controlling them under industrial Safety precautions.

Inspection and witnessing the Electrical material and relevant documents

Preparation of As-Built Drawing with CAD Designer.

Material takes off and preparation of material request based on the specification.

Scheduling of manpower and equipment to job priority.

Monitoring Testing & Inspection activities.

Handling the sub-contractors, suppliers and vendors who are involving the project.

Allocation of jobs to right team at right time.

Overall Monitoring the construction, designing, material & planning activities.

Involving pre-commissioning & commissioning activities.

Doing the electrical staff evaluation.

Area of knowledge

Equipment erection (transformer, diesel generators, main Distribution panel, SMDB, DB, Marshalling panel, switchgears, HVAC starter panel, DDC panel & Thermocouple panel.

Installation of overhead cranes, jip cranes with commissioning support

Boom & column with welding machines, cutting machine installation

Conveyors & pipe rollers installation

All kind of cable laying (MV,LV & Instrument cables, fibber optic cables / UG & AG)

Cable tray, RGS conduit, EMT & all kind of support fabrication, installation.

Panel dressing, cable glanding & termination for all LV & instrument cables

Grounding system.

Lightning protection system.

Lighting pole with light installation

All kind of Instrument installation (flow transmitter, pressure transmitter, level transmitter & all type of control valves)

Cathode protection system installation.

Treble shooting & Testing of Electrical panels & Equipments

Testing - cables (insulation resistance test) Earth rod testing (earth megger test) Gulf Asia Contracting WLL,

As Electrical senior Engineer from February-2012 to June-2017 Client: DAP – ship loaders & warehouse- Dragados,

Sadara Jacobs Chem-1 - Fluor

Saudi Elastomers project – kemiya - Tecnicas Reunidas Yasref – (EPC-1) – Tecnicas Reunidas

Responsibility

Conduct the Tool box meeting (job knowledge & site safety induction)

Looking after the project with customer internship management and sub-contractor coordination for daily, weekly and month progress to eliminate the hurdles.

Material takes off and preparation of material request based on BOQ & specification.

Deploy the manpower, Scheduling and monitoring the activities.

Scheduling of manpower and equipment to job priority.

Selection electrical panels, Transformer & Diesel generator

Conduct the factory acceptance test & site acceptance test

Monitoring the testing & pre commissioning activities

Allocation of jobs to right team at right time.

List out the material from the approved drawing & raise the purchase request based on the project specification.

Preparation of work schedule based on client schedule. Area of knowledge

Equipment erection (Main Distribution panel, SMDB, DB, switchgears)

All kind of cable laying (MV,LV & Instrument cables, fibber optic cables / UG & AG)

Cable tray, RGS conduit, EMT & all kind of support fabrication, installation.

Panel dressing, cable glanding & termination for all LV & instrument cables

Grounding system installation.

All kind of Instrument installation (flow transmitter, pressure transmitter, level transmitter & all type of control valves)

Installation of lighting poles

Testing - cables (insulation resistance test ) Earth rod testing (earth megger test) Nasser S Al Hajri Corporation, Bahrain.

As Electrical Engineer from February -2008 to January -2012 Client: Yanpet Expansion - Fluor,

Saudi kayan Phenolic Project – Tecnicas Reunidas,

NCP – JGC

Samco AA Project

Responsibility

Conduct the Tool box meeting (job knowledge & site safety induction)

Material takes off and preparation of material request based on BOQ & specification.

Deploy the manpower, Scheduling and monitoring the activities.

Scheduling of manpower and equipment to job priority.

Selection electrical panels, Transformer & Diesel generator

Conduct the factory acceptance test & site acceptance test

Monitoring the testing & pre commissioning activities

Allocation of jobs to right team at right time.

List out the material from the approved drawing & raise the purchase request based on the project specification.

Preparation of work schedule based on client schedule. Area of knowledge

Equipment erection (transformer, diesel generators, main Distribution panel, SMDB, DB, Marshalling panel, switchgear s.

All kind of cable laying (MV,LV & Instrument cables, fibber optic cables / UG & AG)

Cable tray, RGS conduit, EMT & all kind of support fabrication, installation.

Panel dressing, cable glanding & termination for all LV & instrument cables

Grounding system installation.

Lightning protection system installation.

All kind of Instrument installation (flow transmitter, pressure transmitter, level transmitter & all type of control valves)

Installation of cathode protection system.

Installation of lighting poles

Testing - cables (insulation resistance test ) Earth rod testing (earth megger test)

Routing all cables as per the IFC drawings & cable schedule Al Qaswa contracting LLC & Al Ajmony General contracting – Dubai –UAE As Electrical Engineer from August -2001 to December -2007 Work Experience:

Panel erection, cable laying, termination, fixtures installation

Cable tray, RGS conduit & support fabrication, installation.

Designing the electrical small power & lighting drawings

Work scheduling

Pole light installation

All kind of domestic electrical erection activities Cawnpore Construction (1999-2000) India

6000 MW Kudankulam nuclear power plant

As Electrical Junior Electrical Engineer from 1999 to 2000

Cable tray, RGS conduit & support fabrication, installation.

Pole light installation

Cable laying & underground, Above grounding.

PERSONAL DETAILS

Name : Raja Rajappan

Father’s Name : Rajappan

Language known : English, Tamil, Hindi, Malayalam & Basic Arabic License : Bahrain Light motor valid license

Passport No : N 6647362

Contact No : +973-********

E-mail Address : ************@*****.***

Marital Status : Married

Home Address : Veeravelai street, Thittuvilai, Boothapando Post, Nagercoil-629001, Tamil Nadu, India

EXPERIENCE SUMMARY

20+ Years’ experience in Oil Refinery, Petrochemical construction Project & Domestic projects in Electrical & Electronics Execution, Planning, Quality, Erection & Pre commissioning in GCC & Home country (India)

Bahrain – 3 year 8 months

Saudi Arabia – 9 years

UAE – 6 years

India – 1.5 years

Projects Handled

Kartec- Marassi- Galleria – Grounding system (From Jan2021 to Till date)- Qurah Electric contracting

Bapco – 2.5million inch dia fabrication shop ASRY – TTSJV ( From May 2019 to Till date) – NSH Corp

Alba Pot line 6 – Bechtel & Bapco – TTSJV ( From July 2017 to May 2019) – NSH Corp

DAP – ship loaders & warehouse- Dragados (From Aug 2016 to April 2017)-Gulf Asia

Sadara Jacobs Chem-1 - Fluor (From March 2015 to June 2016) - Gulf Asia

Saudi Elastomers project – kemiya - Tecnicas Reunidas (From Feb 2014 to 2015) - Gulf Asia

Yasref – (EPC-1) – Tecnicas Reunidas (Feb 2012 to Jan 2014) - Gulf Asia

Samco AA Project - Samsung (From Jan 2011 to 2012) – NSH Corp

NCP – JGC (From Jan 2010 to April 2010) – NSH Corp

Saudi kayan Phenolic Project – Tecnicas Reunidas (From March 2009 to April 2010) – NSH Corp

Yanpet Expansion - Fluor (From Feb 2008 to 2009) – NSH Corp

NPCC Maintenance – (From Sep 2004 to Dec 2007) - Al Qaswa contracting LLC

City centre 11 cinema & G+17(G&B) – Al Ajmony General contracting

(From Aug 2001 to Aug 2004) - Al Qaswa contracting LLC

6000 MW Kudankulam nuclear power plant – Cawnpore Construction (1999 & 2000) Declaration:

I hereby declare that the aforesaid information is true to the best of my knowledge and belief. Thanks & Regards

Raja Rajappan

Contact this candidate