Power Plant Mechanical
Resume:
Noly C. Morales
Cell No. +639*********
Email add, *******.****@*****.***
Position Applied. : PIPE FITTER
2nd Option : MECH. TECH. MAINT. / INSTR.
Objective;
My goal is to find a position with a secure and stable company that will allows me to use my years of Experience in the oil and Gas Refinery Plant Petrochemical Industry in an Environment that is fulfilling and satisfying
Summary of Experienced:
Experience combine fabrication works shop and field works In maintaining, Trouble Shooting, Check-out, Commissioning, Overhauling Services, Installation, Testing, repair of centrifugal compressor, sight glass and gas turbine, oil and gas gathering station, machineries equipment, waste and water treatment plant, and motors in various industrial, oil & gas, mining, power plant and petrochemical industries.
Employment History :
COMPANY : C.Q.CAÑETE CONST.
ADDRESS : PETRON & PETROCHENICAL (PHIL’)
POSITION : PIPE FITTER
FROM : MAY, 2016 UP TO PRESENT
Job Description:
Works within the statutory Health and Safety Procedures and the Permit-to-Work system.
Respond to out of hours call-outs as requested.
Install fire Fighting pull out, repair unclogged pipeline fittings alignment and fit up 10” diameter carbon steel from heat exchanger to generation vessels. Replacement of defective tube to super heater fire tube and water tube.
Prepared bill of materials lay-out of different kinds of pipe 4” diameter and 6” diameter, installation of support and others. Prepared of shell plate cutting grinding for installation and lay-outing, rolling of shell and others.
Dismantling of old pipes and valves for cleaning and repairing including revision and modification flushing and hydro testing, bolt and nuts flanges tightening. Assist in lay-outing fabrication of pipe spool and installation in field for tie in. hauling of fabricated pipes spool from fabrication shop to field are included.
COMPANY ; JAL International Co. Ltd Supply Saudi Aramco Mobil ref.(SAMREF)
POSITION : PIPE FITTER
FROM : OCT. 12, 2010 TO MARCH 01, 2016
Job Description:
Fabricate, fit-up, and install different size of pipe such as stainless steel, carbon steel, alloy, bond, copper alloy, HDPE and PVC from 2” to 24” diameter as per isometric drawing and specification.
Do work such as demolition of redundant piping and replace with new fabricated spools..
Replaced any kinds of gasket like metallic gasket, ring gasket, rubber gasket, compressed gasket & oval gasket using in man way
Do ground fit-up of spools prior for erection.
Preparation of shell plate cutting, grinding for installation and lay-outing, rolling of shell plates and others.
Assigned in tie-in works and hot tapping works
COMPANY : PETROFAC
PROJECT : Harweel Cluster Phase 2 Facilities Project Sultanate of Oman
POSITION : PIPE FITTER
FROM : July 30, 2008 TO Dec. 7, 2009
Job Description:
100% compliance with PPE.
Involved in inspection of drives, motors and belts, check fluid levels, replaced filters, or performed other maintenance works
Conduct grooving and threading, grinding and cutting of pipes.
Perform computations on pipe’s take off as indicated in the drawing.
Repair and replace broken pipe valves and other fittings.
Installation of different kinds of pipe support.
Line checking of pipeline around turbine.
On-time acceptance and completion of assigned tasks.
Zero complaints from customers on maintenance works.
On time provision of technical information and advice.
Update all commissioning documentation post start-up; if required direct and/or participate in all pre start-up safety reviews and pre start-up Hazard
COMPANY : SENIMDI KURYLYS (JOINT VENTURE OF BECHTEL AND ENKA)
PROJECT : SGP Project, Tengis Kazakhstan
POSITION : PIPE FITTER
FROM : Aug. 19, 2006 TO Aug. 22, 2007
Job Description:
Perform a variety of highly skilled maintenance work to maintain structures, systems, heating system, plumbing, machine repair, etc. Work requires an in-depth
knowledge of various trades. Repairs and replaces parts on mechanical equipment, small presses, drills buffing and polishing heads or equivalent. Installs maintains, and/or repairs equipment. Performs all work in accordance with established safety procedures.
Declaring the work for each permit was issued should be properly performed.
Maintained work site always been left in a clean and safe condition and return to its original condition.
Removed and replaced control valve or all kind of valve for maintenance check.
Checking all pertinent mechanical machine components and replacing worn items.
Personally checked the work site and confirmed that work can be done safely subject to condition.
Completing field service reports.
Ability to maneuver a job site, including small spaces in around our equipment.
Assign in any mechanical job and field while assisting operator
COMPANY : CCDMARINE SERVICES
ADDRESS : TOTAL & LIQUIDE GAS (PHIL’)
POSITION : PIPE FITTER
FROM : January 14, 2004 to July 8, 2006
Job Description:
Lay-out, cutting, grinding and installation based on revised construction drawing details.
Coordinates with my foreman about our working schedule.
Fabricated pipe spool for hauling and installation for tie-in, flushing, and hydro testing.
Cleaning of bolts, valves and flanges for inspection.
Covers performing repairs on malfunctioning motors, controls, pumps, and other components.
Ensure the commissioning team is adequately trained as required for their duties and organize all site-related training and inductions.
Assign work tasks and performance monitoring of Contractor staff.
Systemize the plant into commissioning systems to affect the most efficient plant start-up, allocate commissioning systems to the commissioning system engineers
Seminars/Training
AMOSUP SEAMEN’S TRAINING CENTER
MARITIME ACADEMY OF ASIA AND THE PACIFIC (KAMAYA POINT)
HF Acid Awareness and Prevention and Use of Class A&B in Alky unit
Company: Saudi Aramco Mobil Refinery
Location: Yanbu Industrial
FIRE Protection Section
Breathing Air System
Company: Saudi Aramco Mobil Refinery
Location: Yanbu Industrial
Permit Receiving Training
Company ; Saudi Aramco Mobil Refinery
Location: Yanbu Industrial
H2SAwareness
Company:Petrofac
Location: Oman
Instrumentation and Control Servicing National Certificate II
ELECTROTECHNICAL INSTITUTE (PHIL)
Instrumentation and Control Servicing National Certificate II
TECHNICAL EDUCATION and SKILLS DEVELOPMENT AUTHORITY (TESDA) (PHIL.)
PIPE FITTING / NATIONAL CERTIFICATE II
TECHNICAL EDUCATION and SKILLDEVELOPMENT AUTHORITY (TESDA) (PHIL.)
Educational Attainment :
HIGH SCHOOL : Limay Municipal High School (annex) Lamao 1986-1990
ELEMENTARY : Lamao Elementary School 1980-1986
SPECIAL SKILLS:
Computer skills ; Microsoft Word
Personal Data :
Nationality : Filipino
Sex : Male
Age : 46
Civil status : Single
Date of Birth : May 15, 1973
Height : 5’4”
Weight : 65 Kg.
Religion : Christian Catholic
Language spoken : English, Tagalog,
Passport no. : P1460374A
Seamen’s Book No. : C1464727
CHARACTER REFERENCES:
Engr. Ryuzo Goto PNOC PETRON
***********@*****.***
Engr Leal T. Enerio Assistance Mng’r
C.Q.CAÑETE CONST. ******@*****.***
Mr. Jun Gutierez Mechanical Supervisor
Saudi Aramco Mobil Ref. (Samref)
*****************@*****.***
I hereby certify that the above information are true and correct to the best of my knowledge and belief.
Mr. Noly C. Morales
Contact this candidate