REZE G. ARROYO

E &I ENGINEER / E&I SUPERVISOR

BOSIET and H2S Trained at SMTC Global (Singapore) Pte. Ltd

PROFILE

Professional Electrical Engineer Motivated to accomplish safety, quality, cost, standard and schedule. With proven track record of 20 years in OG industry providing significant contributions and add value for Major Operators as well Leading EPC . Extensive experience in Installation, Construction, Maintenance &Commissioning Oil/Gas industry and Power Generation Sector. Recipient awards from major companies in the Oil/Gas and petrochemical business for valuable contribution in safety and work performance. Experience in International Standard such as: SHELL-DEP, Exxon- GP, ARAMCO-SAES, IEC, IEEE, BS and NEMA.

CONTACT

PHONE:

WhatsApp: +658*******

Singapore Mobile: +65 86538062

Home Address: Street 82 Tampines Singapore 520856

Resident Status :Singapore Dependent Pass Valid Dec 2023 can apply for work permit and LOC hence sponsor is Employment Pass.

EMAIL:

adl8l8@r.postjobfree.com

Searching for job opportunity.

Available: May 1, 2021

Current Location: SINGAPORE

Salary Expectation : Negotiable

Notice Period : 4 WEEKS

EDUCATION

Eastern Visayas State University – Tacloban City Philippines

1993 – 1999

Bachelor of Science in Electrical Engineering

Registered Electrical Engineer and Registered Master Electrician

PROJECTS

Oman LNG Debottlenecking and Power Plant Project Refinery

Qatar Gas NFB Offshore LQE Construction fabrication Jacket & Topside

Crescent Petroleum / Dana Gas Khor Mor LPG Recovery Plant Construction-Iraq

Construction of new QSTEC Poly Silicon Plant at Ras Laffan Qatar.

Exxon Mobil Singapore Butyl Adhesion SBA (Aurora/EOS) Construction,Singapore

Construction of New Taq Taq Central Processing Facilities (CPF) – Iraq

Infineum, a joint-venture (JV) of ExxonMobil and Shell Singa Project Construction

GMR Energy Power Generation Plant CCPP (Combine Cycle Power Plant) 2x 400

Upgrade of Recycle Compressor at ARAB D Plant, Qatar Petroleum QP –Qatar

Exxon Mobil Chemical, Singapore Parallel Train (Olefin Recovery Project).

SHELL HOUDINI ECC project– Ethylene Cracking Refinery –Singapore

QATAR GAS CONOCOPHILIPS SHELL (QCS) LNG Onshore Ras Laffan, Qatar.

Construction of New Khurais 380/115 KV (BSP) Substation Power Supply to SAUDI ARAMCO’S

SKILLS

PNANNAN NA

WORK EXPERIENCE

Electrical & Instrument Superintendent – PMC

OMAN LNG REFINERY / KBR (OMAN)

Project: –Oman LNG Debottlenecking and Power Plant Project

February 2020– April 2021

Insure that project execution is as per Contract Schedule Scope of work Approved Project Specification, Project Quality plan and Safety Management system. Serve as Responsible Engineer (RE) Construction Drawing Design Review as per SHELL DEP. Project Management Consultancy for the execution of Documents Review, Material Approval, Construction Installation, Pre commissioning, Mechanical Completion, Testing and Commissioning, RFSU, For the Brownfield and Greenfield area Manage EPC contractor in the execution of the project. (GTG and GEG 24MW, 33KV GIS SWGR, 12 pcs. 25 MVA transformers, LV Switchgear and MCC, UPS, Battery, SCADA, PMS, Instrumentation, Telecom, Fire and Gas, DCS, SIS & PLC. Review and Approves Contractor submittal on Method Statement, ITP, ITR’S, System Definition, Mechanical Completion, Schedule Review Level 1 to 3, Attend Progress meeting, FAT, SAT and coordinate with operation.

Advice EPC on Schedule Execution Conduct Daily Progress meeting, Material delivery, Drawing’s approval. FNVI Completion Software and PRO Man Completion software. Expertise in systemization, completions database, development of pre-comm/comm procedure . Experience pre-commissioning/commissioning large compressors, electrical and instrument rooms, pumps.

Electrical & Instrument Construction Supervisor -EPC

ROSETTI MARINO (QATAR)

Project: Qatar Gas – North Field Bravo Offshore Living Quarters Expansion Platform Construction Jacket & Topside

March 2019 – January 2020

BOSIET and H2S Trained –OPITO APPROVED Course, code 5707)

Supervise E&I construction and fabrication at yard as per approve design drawings. Monitor Daily progress as per approved schedule and report to construction Manager. Review Method statement/ Risk Assessment and Inspection Test Plan. Coordinate with client Qatar Gas and Supervise Sub Contractor NKOM (Nakilat Keppel Offshore & Marine) in the construction implementation. Coordinate with other discipline painting, piping and structural. Monitor in the electrical and instrument installation, Telecom, PAGA, Fire and Gas, Electrical switchgear Room, Instrument Room, HVAC Room, Helideck, Cellar Deck., Transformer and Emergency Diesel Generator, Switchgear Room & Instrument room.

Electrical & Instrument Engineer Construction / Commissioning -EPC

OILSERV (IRAQ)

Project: Crescent Petroleum / Dana Gas Khor Mor LPG Recovery Plant Construction-Iraq

February 2018 –December 2018

Crescent Petroleum & Dana Gas Khor Mor LPG recovery Construction (EPF)- liaise with the Client’s Engineering, Operations and Maintenance staff and Installation contractor as required to ensure a consistent approach to project completion. Supervise Sub Contractor Daily E&I Construction Activity & Review Sub Contractor Method Statement & ITP.Coordinate with Client on Construction Schedule, Inspection and Commissioning Procedure. Review IFC Drawings as per Site Condition, Material Approval Requirements or Delivery & Safety Requirements. Use of FNVI software for Completion.

Electrical Site Engineer – Construction & Commissioning- PMT

QSTec -Qatar Solar Technologies / Qatar Foundation (Ras Laffan QATAR)

Project: Construction of new QSTEC Poly Silicon Plant at Ras Laffan Qatar –Petrochemical Plant

February 2017 – January 2018

Project Management for the Construction, Commissioning and Start Up of the Plant, until final hand over to operation. Coordinate EPC contractor on timely schedule. Review Work Method Statement, ITP, Commissioning Procedure, Mechanical Completion Package, Pre start up safety Review (PSSR) Punch listing and walk down.

Construction & Commissioning and establishment of 220/33-10 KV QSTEC Substation with KAHRAMAA Contract No: GTC/465/2013. Main contractor is ALSTOM. Site name is : 220/33-10kv QSTEC (E1000) S/S of 220KV KHARAMAA Substation, 33KV Plant Substation Witness with Kahramaa personnel and Qstec for testing and commissioning of the E100 220/33-10KV S/S).11KV Motors and switchgear. Develop LOTO procedure, testing & Commissioning Procedure. Testing of transformer, relay, switchgear GIS, SCADA, Ups and battery, interlock and coordination relay study. Supervise the installation and commissioning of the Power Management system (PMS) -SCADA for the whole plant &System loss study and implementation of transmission line to reduce system loss in the transmission line. And segregation of system loss in power line. Design Reviews FEED of Submitted drawings from EPC Contractor design, fabrication, brownfield construction, hook-up and commissioning of HV and LV electrical equipment. Do review and approved material submission of EPC contractor and attend SAT test or Inspection. Review daily work & commissioning work permit. Monitor work schedule and progress with the EPC contractor. Testing of all motor operated valves to confirm and verify that they are working and function according to their assigned configuration value. Final checking (loop check) and verification of pressure / temperature/level transmitters to ensure that they are calibrated and properly set in accordance with their pre- determined set value. Marking and verification of location for new instruments as per general arrangement lay-out. Perform Field Acceptance Test for all existing field instruments by contractors.

Electrical Construction & Commissioning Supervisor / T&C Engineer - EPC

MESA - Mitsui Engineering & Shipbuilding Asia Pte Ltd. –EPC (SINGAPORE)

Project: Exxon Mobil Singapore Butyl Adhesion SBA (Aurora/EOS) Construction, Singapore

February 2016 – January 2017

Supervise Construction, testing and commissioning of the substation equipment. Ensure that all activities comply with the approved testing procedure. Coordinate with ExxonMobil personnel in the testing execution. Assure HSE safety, LOTO and switching procedure is followed as per GP Standard. Supervise the subcontractor in construction scheduling, coordination of the testing. Approved daily work permit, attend daily inspection notification, review test package, attend client walk down and punch closing. Monitor daily progress and report to Engineering Manager. Testing of Transformer 33KV, 11KV and, 11KV VFD motor, 6.3 KV switchgear & Motor starter. (Ratio test, vector group, Hi-pot, CT polarity & Ratio test, Primary and secondary injection for CT and relay test, function test of motor starter and switchgear, insulation resistance, contact resistance test, Pre start up safety Review (PSSR), Hi Pot, inter trip, ATS function test, synchronization test, CT knee point).Authorized switching and Log out tag out person. Serve as deputy Electrical Commissioning Manager in absent of the Electrical Commissioning Manager.

Electrical &Instrument Construction/Commissioning Engineer - PMT

TTOPCO TaqTaq Operating Company – JV ADDAX PETROLEUM of Canada &GENEL ENERGY INTL. LTD.

Project: Construction of New Kurdistan Taq Taq Central Processing Facilities (CPF) – (IRAQ)

December 2013 – February 2016

Project Management or field supervision for the Construction of the new Central Processing Facilities (CPF) 120,00 BPD. Monitor EPC work progress as per Schedule, Project Quality Plan and Safety Requirements. Do design review FEED deliverables from EPC Company, design, fabrication, brownfield construction, hook-up and commissioning of HV and LV electrical equipment? Do review and approved material submission of EPC contractor and attend SAT test or Inspection. Attend Regular Progress meeting and assets site situation with respect to schedule. Review and attend site hold point inspection and surveillance work as per project specification requirements. Review and approved EPC inspection test Plan, Risk assessment and method statement, testing and commissioning procedure &turn over package as per turn over system boundary. Design review and approval. Accept hand over package from EPC Contractor and with respect to Site walk down for punch listing prior to Mechanical Completion, Testing and Commissioning and Start up. Involve in exploration and production, drilling, maintenance & operation, construction, PMC project management construction & Pre Start up Safety Review (PSSR). Support production and maintenance team in trouble shooting, repair, Installation, upgrading, modification.(Management of Change)-MOC,-Project Management Engineer for the Construction of new Central Processing Facilities .Involve in Construction, Progress Monitoring, Attend Site inspection, Resolve Engineering Query with the main contractor. Design review of drawings as per IEC, IEEE, NEMA, Company Standard and Project Specification. Review EPC contractor method statement, Inspection test plan, Testing and commissioning procedure and handover packages. Operation Maintenance and Upgrading Engineering review and sign daily work permit of the Contractor. Review material submittal for the project, issued punch list during walk down handover.

Construction and Commissioning of New Permanent Camp, pumping Station and well pad.

Electrical & Instrument Site Construction/ Commissioning Supervisor - EPC

Chiyoda Singapore Pte. Ltd. (SINGAPORE)

Project: Infineum, a Joint-Venture (JV) of ExxonMobil and Shell Singa Project - Singapore

October 2012 – November 2013

Oversee and monitor electrical subcontractor and vendor progress during construction and coordinate with other trades and discipline on the execution of electrical work. Review subcontractor Method Statement/Risk Assessment, ITP and test packages and ensure implementation on site especially on safety & quality. Sign daily work permit and ensure safety work standard is followed. Clarify and resolve issues with regards to execution of electrical work & ensure all activities are executed safely and all risk are reduced to acceptable level. Attend meeting with client and resolve issue arising during execution of work especially adjacent to live & operating area. Installation and testing of heat tracing cables, junction box installation, cable termination, electrical distribution panels and transformer, as per approved drawings installation and vendor recommendations manual. Facilitate handover from piping to electrical and electrical to piping. Discuss with engineering and sub contract administrator on required and /or additional works which are not part of the scope of works and initiate issuance of site instruction to subcontractor. Attend to subcontractor Request for Inspection (hold & witness points as per approved ITP), monitor quality of installation and raised quality observation report and/or NCR as construction works progress and prepare inspection request to client as required

Senior Electrical Engineer Construction - PMC /Owner Engineer

Parson and Brinkerhoff Ptd. Ltd. (SINGAPORE)

Project: GMR Energy Power Generation Plant CCPP (Combine Cycle Power Plant) 2x 400 MW – Singapore.

May 2012 – October 2012

Owner Engineers or Representative/ Consultant, Project Management, -Review Engineering Design, Drawing and Commissioning procedure as per NEMA, IEC & project Specification, -Act as owner side consultant in the implementation of project construction and Commissioning, -Monitor all main contractor in the Construction, Installation and commissioning of the project Power Plant,-Attend Site inspection and witness commissioning. Review invoice submitted by subcontractor and main contractor versus the main contractor submitted progress report. Issue Non-Conformance Report to the contractor, -Update site construction progress as per schedule. Resolve engineering issue at site, Review Design Query, Inspection test plan, Method statement. Plant capacity: (230 kv GIS, 2 pcs. 500 MVA transformer, Generator 2x400MW), attend contractor’s meetings with regards: Progress, Quality and Safety. Do review and approved material submission of EPC contractor and attend SAT test or Inspection. Design review FEED and approval of deliverables drawings from EPC Design, fabrication, brownfield construction, hook-up and commissioning of HV and LV electrical equipment .Witness FAT and SAT inspection, Approved and issue handover certificate as per project completion. Coordinate with local authorities during tie in. Assets 230 KV SUBSTATION construction and commissioning. Responsible in conducting technical reviews, comment and approve Engineering deliverables and change/work variation orders, assist and advise engineering leaders about E&I issues/expectations during technical discussions with EPC/Sub Con-supplier, Interface with others engineering/construction discipline to ensure efficient and work execution. Qualify EPC/sub-suppliers requests for deviation RFD, MOC (management of change) and TQ/RFI technical query according to the company best practices, Participate in (Site acceptance Test) SAT, MC system walk-downs, (PL activities) and identify Commissioning Start Up related issues that might impact commissioning programs and other project activities

Electrical & Instrument Site Engineer (Construction & Commissioning) - EPC

Black Cat Engineering and Construction – (QATAR)

Project: Upgrade of Recycle Compressor at ARAB D Plant, Qatar Petroleum QP –Refinery Qatar LNG

February 2011 – April 2012

Scope of work is Engineering Procurement Installation Commissioning. Review all Engineering Design in compliance to Clients Requirements and International Standard (IEC, NEMA, IEEE). - Review all Procurement is in Accordance with the approve requirements within Project Specification and clients requirements. Provide material take off as per project requirements. -Review and Approved all as built drawings, -Submit Mechanical Completion package, -Supervise all Sub contractor and vendors during Construction, Installation and Commissioning stage of the project, monitor project progress and review all site engineering query with regards to some design and construction issue. Attend regular meeting with client on project management issue. Qatar Petroleum Permit to work Authorized applicant. (Brown field), familiar with shut down procedure, prepare method statement and risk assessment. Ensure SUB-CONTRSCTOR work is executed safely and within HSE standard of the project (ensure proper controls in place and risk is mitigated to as low as reasonably practicable) champion the culture of caring. Anticipate, coordinate, expedite, resolved any issue that may arise/arises during execution of E & I works. Verify and approve field routed installation, ensure installation are sighted, positioned/oriented properly to avoid being an obstruction to operation and maintenance personnel and ensure all is reflected in the as built drawing. Attend weekly construction meeting, highlight any issue/constraints with regards to safety, quality & schedule. Attend multi discipline system walk down with client, generate and classified punch during walk down.

Electrical & Instrument Site Engineer (Construction & Commissioning)

REC - Rotary Electrical Company Pte. Ltd (SINGAPORE)

Project: Exxon Mobil Chemical, Singapore Parallel Train SPT Refinery (Olefin Recovery Project). And SHELL HOUDINI ECC project– Ethylene Cracking Complex ECC Refinery–Singapore

January 2009 – January 2011

Responsible for managing the cost, schedule control and technical coordination with the client and project team & Monitor Schedule. Responsible for interpreting and clarifying all technical details to the project team. Provide technical direction or instruction to personnel involved, proposing and reviewing of corrective actions. Coordinate with other departments for problems relating to design and activity execution. Coordination meeting with other sub-contractor and review payment as per progress submitted. Conduct daily toolbox meeting together with the Construction and Quality Personnel. Ensure that all aspects of works under the company scope are executed with respect to the approved design and specification and with client or owner standards.-Coordinate and execute statutory inspection and final hand over inspections. Managing a group of supervisor and foreman during project execution to achieve target date of schedule. (Monitoring of project activities) Preparation of Method of statement, Preparation of Installation Test procedure, Preparation of Testing and Work procedure, Supervise with the site supervisor in work scheduling and construction Execution.(Material Request, Installation, Inspection, Testing and Commissioning).Evaluate daily job safety analysis and work permit, Coordinate with QA/QC department in implementing work quality procedure. Evaluate Scope of work with regards to contract. Supervise all job is executed within the Exxon Mobil global practice of standard, NEMA, IEEE, IEC, project specification and Singapore Law. Attend regular meeting with the client to resolve issue at site. Heat Tracing installation, testing and pre-commissioning. Coordinate with piping department of handover of area if it’s allowed to start the installation of heating cables. Assured that the installation is done as per approved method statement, ITP, EXXONMOBIL & SHAW specification & drawings.

Electrical Site Construction/ Commissioning Engineer - EPC

CTJV (Chiyoda & Technip JV (QATAR)

Project: QATAR GAS CONOCOPHILIPS SHELL (QCS) LNG Refinery Onshore Ras Laffan, Qatar.

January 2007 – January 2009

Responsible for establishing, implementing and maintaining the project quality management, system. Responsible for the preparation and submission of progress report as measuring and tracking of volume. Coordinate with subcontractor for daily activity. Responsible for the supervision of works to complete and meet the required quality standards, Specification at the schedule time. Ensure projects implemented are according to stipulated schedule and within the approved project costs. Plan, schedule and co-ordinate the implementation of projects for timely provision of services to client. Plan for weekly and monthly activities taking into account the actual materials, equipment and deliverables. Authorized to identify quality related non-conformances and initiate corrective actions. -Preparation of Request for Inspection (RFI).-Check for Damage and discrepancy against specifications and drawing Review of applicable drawings. Anticipate, coordinate, expedite, resolved any issue that may arise/arises during execution of E & I works. Verify and approve field routed installation, ensure installation are sighted, positioned/oriented properly to avoid being an obstruction to operation and maintenance personnel and ensure all is reflected in the as built drawing. Attend weekly construction meeting, highlight any issue/constraints with regards to safety, quality & schedule. Attend multi discipline system walk down with client, generate and classified punch during walk..

Electrical Site Engineer - EPC

Hyundai - Heavy Industries (SAUDI ARABIA

Project: Construction of New Khurais 380/115 KV (BSP) Substation Power Supply to SAUDI ARAMCO’S

January 2004 – December 2006

Supervise activities required to complete the work on time ensuring it meets the drawing specification and requirements. Ensure compliance with quality Control. -Plan, execute and monitor work activities and take corrective action if delays are identified. Review daily, w) Electrical Site Engineer eekly and monthly work activities and reports. Make Sure that all work is in accordance with the Project technical Specification between HYUNDAI, ARAMCO & SCECO. Implementation in the construction of electrical design in accordance to SCECO standard.. Supervision in the civil work of Sub Contractor, Preparation of material take- off. Attend weekly meeting with client and coordinate with the regarding STQ and resolve site issue regarding drawing discrepancy. Substation construction, 380 KV in comer, 115 KV GIS Switch gear, 2 PCS, 500MVA transformer and 1 controlled room SCADA. (Construction, Testing and Commissioning). Prepare Request for Inspection, Preparation progress Report to be Submitted to SCECO, Monitoring of daily progress versus the Main Schedule, Responsible for establishing, implementing and maintaining the project quality management system.

Electrical Substation Tender/ Engineer

Leyte III Electric Cooperative Inc. Distribution Utilities (PHILIPPINES) Electrical Substation Tender/ Engineer

June 1999– November 2004

Load Monitoring and Maintenance of substation Equipment’s such as (2)10 MVA power transformer, (1) 3mva power transformer and High voltage protection namely,SF6 @ 69KV (PRIMARY Line), Oil Circuit Recloser and Vacuum Circuit Breaker using P122 relay Alstom and Siemens @ 13.2KV (Secondary Line), power fuse installation, air circuit breaker, disconnect switch. Mobilization of linemen in case of fault trip off or outages in substation: locating, isolation (to minimize the scope of interruption), repair and restoration of power immediately to minimize loses. Preparation of Monthly Engineering Report (Energy input & output, pf, system loss) and Monthly Interruption Report (SAIFI, MAIFI). Segregation of distribution System Losses (Technical, non - Technical, Administrative) and Reduction of System Loss. Preparation of Feasibility study for Major Capital Projects. Supervise Substation Construction with the Contractor. Load balancing, distribution transformer management, power factor correction. Preparation of Cost benefit analysis of System Loss reduction program..

Reference Persons:

Jomar Quizon

LQX Safety Officer

adl8l8@r.postjobfree.com

Mobile: +974********

Nelson D. Torio

Completion Coordinator

LQ Expansion Project, Project Management Department –E&P Group

Tel :+974********

Mobil: +974********

adl8l8@r.postjobfree.com

Mark McCarthy

Project Director,KBR PMC for Oman LNG,

Mobile Number : +968-********,

Email : adl8l8@r.postjobfree.com adl8l8@r.postjobfree.com

Jeff Mills,

Commissioning Manager, KBR PMC for Oman LNG,

+968-****-****,

adl8l8@r.postjobfree.com; adl8l8@r.postjobfree.com

Martin Issott

Construction Manager -CPF2

TaqTaq Operating Co. Ltd.

adl8l8@r.postjobfree.com

009****-******* whatsapp

Contact this candidate