Muhammad Rafique, Email: adl5q8@r.postjobfree.com Ph # +1-403-***-****, +1-587-***-**** Page 1-4 Muhammad Rafique, MSc, MEng.

Calgary, Canada Ph # +1-403-***-****, +1-587-***-**** Email: adl5q8@r.postjobfree.com CORE COMPETENCIES

● Over 15 years of professional experience executing CAPEX projects in EPC/PMC environment as Project &Construction Management, Technical Electrical Lead for petrochemical operations, Power distribution, pipelines, utilities, O&G, facility designing, construction, commissioning/maintenance.

● Sound understanding of engineering standards, industry codes such as API, ANSI, ASME, ASTM, IEC, IEEE, NEC, CSA, NEMA, OSHA and provincial variances.

● Proven ability of executing projects by utilizing strong skills of Project and Construction Management, Project Planning, Execution, Cost Controlling, Budgetary proposals, Man hours Forecasting, Contract Preparation, Equipment Purchasing, Project Scheduling, Resource Management, Team Building, Mentoring, and Quality deliverables.

● Expert on engineering calculations i.e. Load evaluation, MCC/SF6 SWGR, Neutral grounding resistor, UPS, Voltage drop, Cable/conduit, LT Panel, HVAC and Heat Tracing.

● Utilized analytical skills, project management practices/ procedures to optimize project resources.

● Supervised onsite, offsite constructions by utilizing quality construction standards including construction techniques to monitor compliance with building and safety regulations.

● Analyzed, managed and mitigate risks related to design and construction activities.

● Prepared internal and external reports pertaining to job status.

● Performed Constructability / Pre-constructability design reviews as needed.

● Successfully completed various phases from Conceptual, FEED, Detail Design Engineering, Construction, Commissioning, and Management of changes.

● Conducted equipment site inspections and witness testing (SAT) during commissioning.

● Prepared client proposals, procurement plans of equipment selection for MCC, SF6 Switchgears, Substations, Surge arrestors, HV Cable sealing ends, Insulators, LT Control/Marshalling/Remote panels, VFDs, MEP system, Generators, AC/DC UPS system, Utility and Distribution transformers and approved vendor drawings.

● Conducted grounding, load flow, short circuit, arch flash power studies and generated reports.

● Conducted key project reviews of HAZID, HAZOP, PID, PFD, 3D modelling, Risk management including brainstormed the mitigation strategies, PHSER and Lessons learned workshops.

● Evaluated vendor’s bids and alternative process to determine the optimum process for each application.

● Performed Factory inspections (FAT), responded to field RFIs and resolved commissioning issues.

● Provided guidelines of installations, testing procedures, submittals and usage of engineering tools.

● Prepared commission records of site observations, punch lists and maintained checklists.

● Assisted with identification and redressed of commissioning and malfunction issues.

● Compiled commission reports data updated commissioning records.

● Demonstrated HSE leadership skills by conducting Safety walkthroughs, and Safety observations.

● Excellent written, oral, presentation and meeting organization skills; proven interpersonal managerial, mentoring and leadership skills and the ability to work as a team lead and team member. ACHIEVEMENTS

● Delivered on-time and within budget numerous engineering Brown field and Green Field projects.

● Executed the Design/Construction/Commissioning phases of Refinery, SAGD, well pads, Gathering, Booster stations, Compressor, Pump, Metering stations, Crude, Fuel gas, HVP/LVP Pipelines, Tank farms, Power distribution, Substations, Transmissions, O/G terminals and utilities projects.

● Negotiated several "Partnership Agreements" as part of the supply chain management process.

● Delivered CAPEX projects with minimal change orders.

● Commissioned on schedule the on-site testing and construction of oil production platforms. PROJECTS HISTORY

● Detailed engineering, construction, commissioning of substations and transmission power lines- Detailed design engineering of 100,000 barrels per day crude oil Gathering Centre – KOC, Kuwait

● Construction of Pump stations, meter stations for Cadwaladr expansion pipeline project-18” pipelines

(64 KM) contains ethane, propane, butane and pentanes plus- Pembina, Canada

● Construction/installation of Tank farm facilities to increase the existing Capacity- Suncor Energy, CA

● FEED/Detailed design & Construction of SAGD processing facility- Devon, Canada

● Construction, commissioning of 100MMSCFD Gas Processing Plant- Stone Mountain Res., Canada

● Refinery upgradation (93,000 bbl./d)-Construction phase, Mari Indus plant- Shell Ltd., Pakistan

● Construction of Oil and Gas terminals, and power utility projects- Shell Ltd., Pakistan Muhammad Rafique, Email: adl5q8@r.postjobfree.com Ph # +1-403-***-****, +1-587-***-**** Page 2-4 PROFESSIONAL EXPERIENCE

Huzaifa Ltd Jul 2020 – continued

Providing consultancy services for clients in power, utility and Oil and Gas sector in Alberta Consultant (Freelance), Calgary- Canada

● Providing technical engineering, consultancy management services for Brown/Green fields projects.

• Preparing bid requisition, RFQs, RPOs, Data sheets for package equipment’s.

● Reviewing and approving vendor data and drawing for issuance

● Developing pre-FEED and FEED technical proposals, Project management plans and supporting detailed design engineering, construction/commissioning activities support. Wood plc (Kuwait Oil Company) Oct 2014 – Jul 2020

DE, construction and commissioning of 72MW substations and 132kV transmission lines – Kuwait Oil Company Project Manager/ Lead Electrical Engineer, Al Ahmadi, Kuwait

● Prepared Budgetary proposals, Project management plans, Project execution plans for FEED and Detailed design engineering phases.

● Managed multiple activities effectively such as Quality assurance, engineering, stakeholder engagement, communication, Regulatory approvals, procurement, planning & controls, construction management, pre-commissioning, employee relations, and safety.

● Developed IFC drawing package including single line diagrams, area classification drawings, cable schedule, panel schedule, motor schematics, electrical layouts, grounding/bonding layouts, power, control, instrument, EIC junction boxes, load list, voltage drop, I/O list for plant automation system.

● Monitored project progress, implemented contractual standards and requirements to maintained the base line scope, allocated time, resources and budget.

● Utilized the analytic project management and construction management strategies to accurately forecast field operations resource requirements and optimized the execution methodology of project delivery.

● Developed Project Interface plans and managed the interface register.

● Communicated with developers, municipalities, general contractors, subcontractors, and investors.

● Conducted design and PMC construction review meetings with project stakeholders.

● Evaluated bench marks, slit trenching, soil investigation, boreholes, topographical survey reports prior to start the construction for processing facilities including substation and power transmission lines.

● Conducted key reviews e.g. HAZID, HAZOP, PHSER, PIDs, and Risk assessment.

● Conducted regular construction /progress reviews meetings with EPC contractor /subcontractors to manage the Construction works and mitigated the impact due to changes against the planned progress.

● Managed resources, quality, schedule and budget adhered to the approved project management plan.

● Reviewed the daily/weekly/monthly activity progress reports, construction work packages.

● Maintained records of all changes including purchase orders, change orders and/or work orders

● Prepared ITPs, scheduled vendor’s shop visits and prepared readiness reviews for testing of equipment.

● Prepared close out documents and issued Final acceptance certificates.

● Reviewed/ approved Vendor technical data, Ministry standards Mechanical, Piping, E&IC, Chemical design packages, transmittals and technical documents.

● Coordinated with project stakeholders to resolve all project issues and evaluated compliance to all plans and specifications for construction projects.

● Evaluated waste water management plans and conducted regular quality inspections at construction sites to enhance safety and regulatory compliance.

● Developed data sheets for equipment selection such as 380/132kV SF6 Gas Insulated Switchgears, Power transformers, surge arrestors, remote control, relay board, substation auxiliaries and fire Alarm/ fire fighting system.

Shell, Devon, Suncor, Husky, Pembina projects May 2010 – Oct 2014 Construction of LNG 16” (220KM) Pembina pipelines upgrade from LaGlace to Wapiti and associated pump stations and terminal upgrades in Gordondale, Alberta- Detailed phase of Husky Rush Lake SAGD 12,000 bpd processing facility, Suncor MacKay River plant upgradation to 15000 bpd. Construction of natural gas gathering, processing and transportation storage of crude oils and NGLs

Project Lead, Calgary – Canada

● Developed project plans, action logs, communication plans, status reports and post implementation reviews to keep the project in line with planned PMP.

● Performed value engineering analysis to develop the construction work method statements including project recommendations in the solution of complex problems. Muhammad Rafique, Email: adl5q8@r.postjobfree.com Ph # +1-403-***-****, +1-587-***-**** Page 3-4

● Planed, directed infrastructure and other construction project activities by consistently monitoring project resources and progress.

● Carried out the construction activities as per approved Contract and field change orders.

● Constructed and commissioned HVP and LVP hydrocarbon liquids pipeline expansion to connect with existing processing facilities.

● Managed various project activities including scoping, planning, execution, monitoring, and reporting on project tasks.

● Evaluated technical bids for awards and expedited the material requisition & purchase orders.

● Supervised /approved engineering design of chemical injection, LP/HP gas compressors, gas dehydration package, glycol make up package, instrument air, fuel gas package, burn pit package, fire water pump package, vessels, pumps, tanks and LP gas supply pipelines for gathering centers.

● Conducted risk assessment workshop to mitigate the risks.

● Prepared engineering and construction work scope packages for site installation and module yard.

● Issued IFC deliverables e.g. plot plans, data book indexes, construction binder indexes, civil/mechanical/piping, E&IC scope of work, P&IDs, calculation notes, engineering drawings, specifications, technical reports and transmittals.

● Designed power distribution system and implemented totally integrated electrical solutions comprising of MV switchgear, MCCs, VFDs, HVAC, and designed of MV/HV substations.

● Conducting Power studies by using ETAP and preparing reports for load flow, relay protection/coordination study, short circuit and arc flash studies.

● Produced engineering calculations i.e. load list, voltage drop and AC/DC UPS sizing.

● Conducted interdisciplinary 3D reviews and lesson learned workshops.

● Managed interdisciplinary squad checks on technical vendor data and drawings.

● Reviewed the consistency of deliverables as per defined scope, conducted meetings with interdisciplinary departments for concise inputs on technical documents/ drawings to ensure compliance with Contract and project standards.

● Prepared DBM, PEP, project cost estimates, construction work packages, scope of works, MTOs. SIGIT Automation Inc. Dec 2008 – May 2010

Construction, commissioning of 100 MMSCF natural gas processing facility & compressor station including Well pads at Coles Lake Gas processing facility. Designed power/control, automation, and SCADA networks Project Manager, Calgary – Canada

● Executed detailed design engineering of compressor station and supervised the construction and commissioning activities of 11 Well pads.

● Complied the constructions with legal requirements, building and safety codes, and other regulations

● Reviewed, approved and issued IFC drawing packages for PFDs, HAZOP, P&IDs.

● Generated project progress report, project cost control reports.

● Negotiated the Contract and coordinated with multiple vendors for expediting the long lead procurement equipment due to tight schedule.

● Prepared technical documents for commissioning and provided construction and commissioning support to Contractors /subcontractors and site team.

● Reviewed and approved FAT/SAT reports. Inspected equipment during fabrication for compliance.

● Issued and approved IFC deliverables, system architecture drawings.

● Prepared DBMs, PEPs, change orders, policies and procedures.

● Prepared weekly, monthly and quarterly project progress reports for clients.

● Prepared log for construction issues/project action items and assigned responsibilities to the team.

● Conducted risk review sessions and assigned to the team to mitigate the project related issues.

● Interfaced with multiple disciplines, e.g. Asset teams, Mechanical, Piping, Civil/structures, Electrical, Instrument & control and Processing to produce quality project deliverables.

● Mentored junior staff, provided technical support to the construction team. Toyo Engineering Jan 2008 – Dec 2008

Executed upstream oil and gas brownfield project for the petroleum industry. Upgraded existing Shell Burnt Timber substation and gas processing plant for redundancy in Alberta Electrical Specialist, Calgary – Canada

● Managed and supported, designers, draftspersons and project secretaries in the preparation of electrical technical documents and drawings.

● Modified, drafted electrical technical drawings and issued technical documents.

● Developed electrical scope of work, DBM, data sheets and instrument index.

● Coordinated and managed new power supply connection from Fortis Alberta, Enmax energy and conducted electrical inspections prior to commissioning. Muhammad Rafique, Email: adl5q8@r.postjobfree.com Ph # +1-403-***-****, +1-587-***-**** Page 4-4

● Produced electrical engineering calculations e.g. Voltage drop, Load list, UPS sizing, Motor circuit protector sizing, Cable tray sizing etc.

● Prepared Area classification by utilizing Fugitive emission study, conducted power system analysis, power study (ETAP).

● Designed motor schematics, contactor control schematics, electric heat tracings, I/O, PLC drawings and prepared other engineering calculations for the detailed system design, lighting layouts, panel schedule, conduit and cable schedule, instrumentation wiring layouts. Sui Northern Gas Pipelines Ltd. Dec 2004 - Jan 2008 LPG/LNG pipelines expansion corridor projects (217 miles of 16” and 80 miles of 10” diameter pipelines supplying from Pakistan industrial Development Corporation and Dhulia-Rawalpindi-Wah system Project Engineer, Pakistan

● Prepared proposals, engineering scope, Design Basis Memorandum, Project execution plans.

● Localized load evaluation for LPG/LNG pipelines utilities.

● Developed conceptual engineering designs, feasibility study reports and economic analysis for Brownfield and Greenfield LP/LNG Pipelines Projects.

● Provided engineering support to project managers regarding cost estimates, major equipment selection, project planning and execution.

● Prepared material requisitions, bid evaluations, Material Takeoffs and scheduling.

● Supported the site engineers in evaluating the overall utility distribution at the existing pump station units and provided recommendations.

● Developed specifications/standards and evaluated vendors proposed equipment accordingly.

● Provided technical directions to design/ site personnel.

● Ensured that assigned personnel were familiar and adhered to the HSE requirements.

● Carried out field inspections, surveillance and witnessing of Contractors operations, Construction, start up and commissioning activitie

EDUCATION

Master of Engineering (M. Eng.) 2002-2004

Electrical Engineering, McGill University, Montreal, Quebec, CANADA

Contact this candidate