Ut Ax
Resume:
GEORGE L. MANALO
Barangay Paharang West, Batangas City
Contact No. 091*-***-****
Email Add: adl2o8@r.postjobfree.com
POSITION DESIRED: INSTRUMENT TECHNICIAN
NDT TECHNICIAN LEVEL II
CAREER OBJECTIVE:
To work in professional & challenging environment where I can utilize best my skills & which provide an opportunity to learn, constantly & develop new perspective continuously.
EDUCATIONAL BACKGROUND:
Tertiary : Industrial Instrumentation Process Control Technology
University of Batangas
2008 – 2010
Secondary : Paharang National High School
1999 – 2003
Primary : Paharang Elementary School
1993 – 1999
TRAINING ATTENDED:
Philippines Nuclear Research Institute (PNRI)
Non-Destructive Testing (NDT) Ultrasonic Testing Level 2
July 16-27, 2012
Skills and Competencies
On-the-Job Training
• MARIWASA SIAM CERAMICS INC.
Maintenance
RK / SKL Department
San Antonio, Sto. Tomas, Batangas
May 17 – September 28, 2010
WORK EXPERIENCES:
Company : COLLINS AEROSPACE
Address : Tanauan, Batangas
Position : Test Technician
Inclusive Date : October 16, 2018 – April 16, 2019
JOB DESCRIPTION:
• A test technician works in a variety of industries and aim make sure products meet quality standards and function properly. The tests these professionals perform vary depending on the product to ensure it is in no way defective. The education needed to become a test technician is an associate’s degree in a field related to engineering technology, with typical coursework involving basic electronics and circuits.
• Test technicians inspect product functions as well as monitor test procedures and equipment. Many technicians have an associate’s degree in engineering technology or a related field. Obtaining a specialty certification may help test technicians advance their careers.
Company : DURAT AL JUBAIL COMPANY LTD (DJC)
Inspection and Engineering Services
Address : Saudi Arabia
Position : NDT Technician Level II Inspector in “RT, MT, PT, UT”
In the following projects:
*TAMIMI – Perform as Radiography Testing
*SENDAN – Perform as Dye Penetrant Testing
*KEMYA – Perform as Dye Penetrant Testing
*SADARA CHEMICAL COMPANY – Perform as
Radiography testing
*OLAYAN DESCON–Perform as Liquid Penetrant Testing
*SAUDI KAYAN SABIC – Perform as Liquid Penetrant Testing
Inclusive Date : April 22, 2016 – July 2017
JOB DESCRIPTION:
• NDT Job Description Reporting to the internal coordinator the level 2 technicians will be performing calibration, nondestructive test, and evaluation for acceptance or rejection determinations according to written instructions and record result. Level 2 technicians are qualified to set up and calibrate equipment and to interpret evaluates results with respect to applicable codes, standard and specifications.
Company : GAD BUILDERS & ENTERPRISES
Address : Cabuyao, Laguna
Position : Instruments Technician
Inclusive Date : May 20, 2012 up to January 20, 2016
JOB DESCRIPTION:
• To perform Commissioning work Loop Checking, Repair, Calibration Texting, Configuration of the parameter of Hard and fieldbus, Instruments used in process variables Pressure, Level, Flow, Temperature, Vibration, Transmitter, Switches Etc. and other monitoring measurement test.
• Perform function testing of On – Off Valve, Calibration and configuration of Control Valve Hart and Foundation fieldbus.
• To perform functional and simulation testing loop test for instrument transmitter, conductivity, flow, pressure, RTD, pressure switch, analyzer and stroking for the On – Off valve, Control Valve and MOV.
• Line checking for the magnetic flow and flow meter and to all instruments for the DCS to panel board.
• Replaced defective transmitter and clean, install sensor for the tank, replacing thermocouple, installation of valve with electro-pneumatic positioned, replacing proximity switches, wiring electric motor for the cyclone air lock and other technical task.
• Skilled to read Engineering drawings, Location Drawings, Loop Diagram, P&ID Drawings, Logic Diagram’s and Hook-up Drawing also.
• Well-known with the plant running, predictive, preventive, breakdown and Corrective Constructions and Commissioning.
• Installation of fabrication of Instrument cable tray and installation of process tubing.
• Installation of control panel, calibration of instrument assisting to technical for loop checking.
• Fabricate tubing supports, junction box racks, cable tray supports.
• Vast knowledge of solenoid, relays, contractor and motor starter in Industrial system. Application of pilot devices, limit switches, selector switches, float switches, pressure switches, temperature switches and other pilot indicators.
• Knowledge of programmable controller and devices application. Application of PLC. Classification and operation of programmable controllers. Address for inputs and outputs for the micro logics PLC.
• Knowledge of electro-pneumatics. Application of compressors piston compressors and their regulations, applying air filter regulator, cleaning the pneumatic cylinder double acting and single acting cylinder.
• Installation of sensor at the husk hopper, wiring electric motor of screw feeder at gasifier. Installation of limit switches and other pilot devices at the hopper. Preparing wire for the control and wiring junction box for the sensor. Checking the pressure of the reactor through the dual gauge.
• Replaced defective transmitter and clean, install sensor for the tank, replacing thermocouple, installation of valve with electro-pneumatic positioned, replacing proximity switches, wiring electric motor for the cyclone air lock and other technical task.
• Electrical termination of panel board in the gasifier electrical room. Install circuit breaker and contractor, time relays, and counters. Wiring programmable control for PLC omron.
• Programming of control panel computer in support line and changing the parameters of the controllers.
• Termination of the control panel, wiring motor, control circuits start and stop motor control, start and stop with jogging, forward and reverse motor control, wye-delta motor and control and load circuits.
• Calibrating of different types of transmitter, temperature transmitter, differential pressure transmitter, 1/P transducers transmitter, adjust the zero and span of the transmitter. Configure both the transmitter and controller.
• Installation of the pressure gauge in the gasifier. Checking the pressure in the vessel, recording and tagging.
• Installation of panel board and wiring.
• Installation of the magnetic contractor and breaker switch.
• Replace the motor pump and install to new motor pump.
• Wiring for the motor pump and change wiring to the control panel.
• Wiring and replace to new breaker and contractor to the control panel.
• Installation the new control panel for the seawage.
Company : INDUSTRIAL INSPECTION (International) INC.
Address : Dumantay, Batangas City
Position : NDT Technician Level II
In the following projects:
*JG Summit – Perform as Dye Penetrant Testing
*Batino Calamba – Perform as Radiography Testing
*Caltex Refinery – Perform as Dye Penetrant Testing
*Coco Chem Refinery – Perform as Radiography testing
*Azucarera Sugar Refinery–Perform as Radiography Testing
*FPIC – Perform as Dye Penetrant Testing
Inclusive Date : February 10, 2011 to March 20, 2012
JOB DESCRIPTION:
• An NDT Technician is responsible for executing the tests using the procedures and methods to determine the maximum quality of the product.
• An NDT Technician s responsible for inspecting duties organizes and generates reports pertaining to inspection and evaluation. He is also expected to prepare reports on all testing and evaluation done.
• An NDT Technician is responsible for ensuring that the equipments used for testing are all functioning to its maximum and according to safety regulations. He is also responsible for endorsing the equipments to repair.
• An NDT Technician is responsible for prioritizing job orders in terms of its cost and effectiveness.
• He travels to the site where he is needed to support in terms of giving technical operation evaluation. He is also expected to follow instructions given by his supervisor.
PERSONAL INFORMATION:
Age : 33 years old
Civil Status : Single
Date of Birth : November 30, 1985
Place of Birth : Batangas City
Citizenship : Filipino
Height : 5’6”
Weight : 58 kgs.
Religion : Roman Catholic
Languages : Tagalog and English
Father’s Name : Doroteo Manalo (Deceased)
Mother’s Name : Irenea Manalo
Their Address : Paharang West, Batangas City
Person to be contact in case of emergency:
IRENEA MANALO
Paharang West, Batangas City
CHARACTER REFERENCES:
*Available upon request.
GEORGE L. MANALO
Applicant
Contact this candidate