Production Machine Operator

Javier Mota

**** ******* **. *** *******, TX. *8237 (C) 210-***-**** *************@*****.***

Professional Summary

My years of experience assure quality and accuracy. I bring dedication and enthusiasm to learn and grow with the company. My skills of leadership can be applied to be productive for the company. As it will demonstrate being capable of the opportunity for advancement. My skills include operating and taking care of various surveying equipment. I bring the capability of reading angles accurately. And the use of mathematical skills as well as communicating effectively both oral and writing, as well as sharing and receiving knowledge with coworkers.

Skills

Work History

●Production Machine Operator

01/20/2020 to 12/22/2020

Frito Lay - 4855 Greatland Dr, San Antonio, TX 78218

JOB RESPONSIBILITIES:

Performed basic preventative maintenance on packaging machines such as cleaning or switching out knives and blades, pull-belts, tape machines, or rollers, depending on the need.

Wear protective gear when using chemicals to clean and sanitize lines during changeovers from one product to another.

Inspected conveyors and scales prior to line start-ups & changeovers.

Troubleshoot commonplace problems and make operational adjustments.

Setup and operate multiple packaging machines to ensure accurate code dates, weights, and that products are put into appropriate bags.

Checked that products are dated and sealed with a minimum amount of wasted product and supplies

Responsible for ensuring that products to be packed remain clean.

Maintaining a clean and safe work area. Safety is everyone’s job.

●Quality Assurance Assistant

07/22/2019 to 11/21/2019

Veracity PSG Temp Service- TTTX –Lone Star Pass- San Antonio, Tx 78264

JOB RESPONSIBILITIES:

As a quality assurance assistant, my responsibilities required to look for any detailed imperfections and differences on production parts. From parts being stamped, welded and assembled. Comparisons were made by the use of master parts and master plans. Including the use of Vernier calipers and checking fixtures for precision measurements. Responsibilities for verifying quality was required for any changes, on changing; welding tips, brackets, welding adjustments and pins in the welding department. as well as in the stamping department. This was done by recording information on a line call sheet, for the assurance of protocol procedures. Verification included, three-part rule or eight-part rule for different departments. Clean points were also required, in order to have a point of knowledge where a part was last defected, and corrections were made to fix the problem.

●Machine Operator Level 3

07/27/15 to 01/17/2019 FGF-Stribling Street San Antonio, TX. 78204 JOB RESPONSIBILITIES: As a machine operator level three, my responsibilities involved operating an ultrasonic machine that was used to cut slices of bread. The responsibilities included paying attention to detail, as far as managing the cut of the product to be within size and weight for quality control and quality assurance to approve of the product. As well as preparing and setting up the machine for a different type of product to be cut. In the process of this set up, it involved adjusting the width of the blades with the proper cutting block. Information that was gathered from the knowledge of reading a master sheet. As adjustments were also made to speeds and location of product. Other duties involved that the machine was working properly. Communicating with supervisors of any trouble shootings.

My advancement from machine operator level one to machine operator level three was a tremendous advancement that proved to myself of being able to master such a responsibility of having the will and enthusiasm to learn.

●Guard Shack

■04/2015 to 7/27/2015

Schmidt land services – 1105 Simmons Jourdanton, TX. 78026

JOB RESPONSIBILITIES:

My duties for Schmidt land services is to Guard and facilitate flow of traffic. Assuring the millions of dollars in equipment. I have the responsibility of verifying authorized personnel identification.

●Furniture assembler

10/2011 to 03/2015

Texas department of criminal justice – FM 2821 West Huntsville, TX. 77342

JOB RESPONSIBILITIES:

I assembled constitutional chairs and banker’s chairs, while paying close attention to detail in the finishing process. Sanding process was also involved which consisted of a use of 80 grit 150 grit and 300 grit for the preparation of staining and polyurethane. The assembling of these chairs consisted of the knowledge and use of power tools, hand tools and modifications.

●Instrument Man 2

11/2010 to 05/2011

Pape-Dawson Engineers – 555 E. Ramsey San Antonio TX

JOB RESPONSIBILITIES:

My responsibilities as an instrument man level two were operating and caring for a data collecting instrument and global positioning system. Verifying of properly inputting information to accurately install precise surveying points. This task also involved the knowledge developed of performing topography on various types of terrains.

●Field Engineer

08/2008 to 10/2010

Baker Construction – 8300 Hempstead Houston, TX.

JOB RESPONSIBILITIES:

My responsibility as a field engineer consisted of layouts with the use and understanding of architectural and structural plans. Data that was collected through this information was then used to apply it to the data collecting instrument such as a sokkia data collector. This type of work involved figuring out volumes of concrete as well as properly laying out elevations and locations of buildings, columns, and walls. While the information that I was responsible for providing such as, control lines was used in the precision of this construction.

●Instrument Man 2

■06/1997 to 08/2008

Pape-Dawson Engineers – 555 E. Ramsey San Antonio TX 210-***-****

JOB RESPONSIBILITIES:

My responsibilities as an instrument man level two, were operating and collecting information with the use and care of the data collecting instrument and the use of the global positioning system. With the help and supervision of the party chief. From which I was able to advance to a level two instrument man, coming from a rod man level. In which my duties as a rod man were to properly follow instructions and make wise decisions as to properly installing survey points and information.

Education

Alvin Community College - 3110 Mustang Rd. Alvin TX. 77511

St. Phillips College- Martin Luther King Dr. San Antonio TX.

John F. Kennedy H.S.- 1922 S. Gen McMullen San Antonio TX.78226

Certifications

National Certification of Construction and Educational Research

Dec. 2014 Windham School district - 804 Bldg. A, FM 2821 West Huntsville, TX 77342

-Mill and Cabinet building

-Plumbing and pipe fitting

-10 HR. OSHA safety course

Contact this candidate