Mark Haywood

Mechanical Design Engineer

*** ***. **********, **. *****

502-***-****

adkpee@r.postjobfree.com

Summary:

I have over 40 years of experience as a Mechanical Design Engineer/Checker along with liaison engineering experience.

Proficient in Solids and Surfacing and have worked with complex curves, surfaces, and flat panels. I also have experience with composites, roto-molded plastics, tooling, machined fittings, sheet metal design and DMU in Structures, ECS, Payloads and E/E packaging using Solidworks, CATIA V4, Cadkey, Cadra, Matrix / Enovia, BOM, PDM, SAP and Teamcenter.

Over 15 years of Solidworks 3D experience creating sheet metal, molds, machined parts and 3 years of Manufacturing Engineering experience.

Extensive experience with GD&T (Geometric Dimensioning and Tolerancing).

I have worked with manufacturing mechanics to fabricate new designs from start to a finish including: sheet metal, machined and composite parts.

Light experience with FEA stress analysis.

24 years of experience at Boeing along with other Aerospace and Defense contractors.

I worked in the Payloads group designing composite overhead bins, sidewalls and door sidewalls.

Experienced in working in the ECS group designing Lav / Galley venting air ducting and cabin air distribution. I also have worked in the E/E bay in the lower lobe of the 777 program designing enclosures for electronic components.

Experienced with engine nacelles and fittings for the C5 aircraft re-engine program.

Technical Skills:

Solidworks 3D Advanced

PDM/BOM ENOVIA/MATRIX Advanced

Teamcenter Intermediate

CATIA V4 Advanced

CADRA Intermediate

DMU GD&T Advanced

PDM PRO Advanced

Some FEA analysis Intermediate

Professional Experience:

Progeny Systems, LLC: Charleroi, Pa. 10/2020-Present

Mechanical Design Engineer

Mechanical Design Engineer on naval programs.

Airdyne Aviation, LLC: Brooksville, Fl 2/2020-7/2020

Liaison Engineer

Liaison Engineer on C-130 parts and installation.

Seemanns Composites, LLC: Gulfport, Ms 1/2019 – 2/2020

Mechanical Design Engineer/QA

Mechanical Engineer for design of molds, tooling patterns for the Columbia submarine program

Checked drawings and molds to make sure they match the specifications

Design being done using Solidworks 2017.

Experience using FaroArm and laser tracking for scanning parts.

Aery Aviation, LLC: Greenville, Sc 5/2018 – 8/2018

Mechanical Design Engineer

Mechanical Engineer for the design of FLIR fairing for a Gulfstream IV for the US government. Interior design on a Global Express aircraft

Design being done using Solidworks 2017.

Crawford Composites, LLC: Denver, NC 1/2017 – 2/2018

Lead Mechanical Design Engineer/Checker/QA

Lead Mechanical Engineer for design of molds, patterns for various carbon fiber parts for aircraft, medical devices, NASCAR and Indy cars.

Checked drawings and molds to insure they match the specifications

Design being being done using Solidworks 2017.

Experience using FaroArm for scanning parts and creating molds.

Lifeport/Staffing Technologies: Woodland, WA 8/2016 - 12/2016

Principal Engineer

Principal Engineer for the EC 130 T2 program, the design of a new medical interior for the EC 130 Eurocopter.

Design was done using Solidworks 2016.

Experience using FaroArm for scanning parts and creating molds.

Extensive GD&T per ASME Y14.5

Sierra Nevada Corp: Hagerstown, MD 2/2016 - 4/2016

Mechanical Engineer

Design of electronic racks for surveillance aircraft using Solidworks and PDM PRO.

HL Lyons: Louisville, KY 2/2013 - 4/2016

Mechanical Design Engineer

Designed and created drawings for store fixtures using Solidworks

Extensive sheet metal fabrication.

Worked in the shop with the mechanics as a liaison engineer resolving shop issues.

Strata-G: Huntsville, AL 2/2010 - 1/2013

Mechanical Design Engineer / Design Checker

Structural design for the UH-60 Blackhawk Helicopter program (CBP) encompassing airframe and interior panels.

Main engineer for UH-60 and Bell 058 Kiowa BFT programs.

Design\drawing checker for UH-60 and Bell 407 Armed Helo.

Extensive GD&T per ASME Y14.5

Belcan Corporation: Aerospace Division: Lexington, KY 1/2006 - 5/2010

Structural Designer/Senior Design Checker

Structural design for the CH-60/UH-60 Blackhawk Helicopter program encompassing airframe and interior panels.

Designed the vibration absorber installation for the Coast Guard (J-Hawk) cabin and cockpit utilizing CATIA V4, DMU, Enovia/Matrix and Impact.

Senior design checker/team lead for all Sikorsky helicopter programs.

Timco: Greensboro, NC 9/2005 - 12/2005

Design Engineer/Structural Engineer

Design engineering on working modifications on commercial aircrafts including: structures, ECS and Payloads.

Worked with the mechanics to ensure that the parts are manufactured correctly.

GD&T

I also worked in the hangers as a liaison engineer.

Northrop Grumman: FL 7/2005 - 09/2005

Structural Engineer

Designed and release engineered structural drawings on CATIA V4 for the E2D Advanced Hawkeye.

Gulfstream Aerospace: Savannah, GA 1/2005 - 5/2005

Mechanical Design Engineer / Team Lead

Worked in the Special Missions group.

Structural Design of frame, stringers, and longerons.

Mobile Aerospace Engineering: Mobile, AL 9/2004 - 12/2004

Mechanical Design / Drawing Checker

Mechanical design of structures on the 757 passenger to freighter conversion.

Floor group in body section 41 and 46.

Worked with the mechanics to ensure that the parts are manufactured and installed correctly.

Used CATIA V4, and DMU.

Goodrich Aerospace: Chula Vista, CA 5/2004 - 9/2004

Structural Design Engineer:

C5 re-engine program working on nacelles and pylons as engineer and checker.

Worked with CATIA V4 and PDM (Metaphase).

Kawasaki Heavy Industries: Kirkland, WA 2/2004 - 5/2004

Mechanical Design Engineer / Checker / Team Lead

Aerospace and Defense Structural design and tooling on the 7E7 Fuselage 44/46 sections.

Working with CATIA V4 and V5.

Boeing Aircraft Co.: Everett, WA 9/1979 - 8/2003

Mechanical Design Engineer/Design Checker /Team Lead

6 years’ experience on 737/747/757/767 and 777 structures and DMU on the horizontal stabilizer and body sections 44 and 46.

7 years in Payloads, designing overhead bins, sidewall and ceiling panels, doorway linings and life raft boxes for 737,757,767,747 and 777.

I also have 7 years’ experience in Environmental Control Systems working on Lav/Galley Venting/Supply and E/E Cooling for all of the above mentioned programs

Education:

Balin Institute of Technology: Anaheim, CA 1986

Bachelor's Degree in Mechanical Engineering (BSME)

Renton Vocational Tech 1980

Associate Degree in Structural Design

Contact this candidate