Asif

Huseynli

Oil and Gas Professional with ** years’ of Onshore & Offshore drilling & completions experience in different continents with a track record of a drilling engineer / project manager that exceeds expectations delivering projects

+994*********

adkbx2@r.postjobfree.com

USA, Azerbaijan

DOB: 24 Sep 1980

Experience:

Deputy Chief Engineer / Wells Operations Manager:

Feb 2019 - Current

Baku, Azerbaijan

Well Operations Manager for 8 onshore and 10 offshore drilling rigs

Drilling Manager for refining well design strategy and support the long term company strategy

Lead the rig lines to establish and refine the cementing, drilling program consistency, operations reporting, best practice capturing / learning practices.

Technical Advisor / Account Manager

Sep 2016 – Feb 2019

Baku, Azerbaijan

Technical Advisor for VersFlex Liner Hanger and Down Hole Flow Control Intelligent Completions

Account Manager for all the products and services that Halliburton provides to BP: Well Placement, Drilling Fluids, Wireline & Perforation, Completions, Landmark, HDBS, Cementing, & Pipeline Process Services

Analyze and make recommendations to drilling and completions services that will improve the delivery and save cost and time for the customer.

Local Ethics Officer for Halliburton Caspian West

Senior Drilling / Completions Engineer

August 2015 – Sep 2016

ADMA JV, Abu Dhabi, UAE

Started a new Jackup rig in ADMA fleet with Shelf Drilling

Analyze the technical parameters of the well, including well control equipment, hoisting equipment, rig and pipe deck capacity and compare this to the upcoming well plans to assure the new accepted rig will be able to handle the rig schedule well. Make recommendations for equipment change out as needed.

Senior Engineer for Re-Entry / Work Over wells in Zakkum field

Plan and execute long step out re-entry and sidetrack wells in the field that will optimize wellbore exits & successful delivery of the completion.

Senior Drilling Engineer

August 2013 – Sep 2015

Sunbury, UK

Single Point Accountable for the first Deepwater Libya exploration wells with high H2S

Planned Pressurized Mud Cap Drilling (PMCD) for carbonate drilling in deepwater Libya

Lead time and cost estimates by analyzing Libya offshore well performances, carbonate well drilling performances around the globe and deepwater well performances from GOM, Brazil, and Angola. Use analyzed time estimates to build in depth probabilistic cost estimates for three different prospects for deepwater Libya.

Senior engineer for Onshore Egypt 20K psi HTHP Exploration well.

Analyze high pressure and high temperature wells that BP has drilled in onshore US and offshore Caspian to be able make right decisions for wellhead equipment, well tubulars as wells as liner hanger equipment that will be able to stand the well loads.

Permanent Abandonment plan for In Salah wells in Algeria

Initiated and Ran Engineering and Engagement sessions in Sunbury for GWO function. These meetings aimed to share the best practices as well as optimizing the well programs, long lead equipment planning for different regions.

Part of Improving Wells Competitiveness team, SDE for designing Well Classification tool that will classify wells based on their complexity. Understanding the well performances for the BP wells drilled around the globe and building a tool that will summarize their technicality.

Deepwater Drilling Engineer (DE) / Wellsite Leader

Aug 2008–Apr 2013

Gulf of Mexico, USA

Single Point Accountable Drilling Engineer for planning and execution of deepwater wells in Mad Dog and Atlantis Ultra Deep Water Projects

DE for drilling Relief wells for Macondo Project, Interception operations and well planning. Investigated and estimated Ranging operations during relief well planning

DE for BP GOM Restart, to start BP drilling operations back in GOM again with new regulations and company practices.

DE for one of BP first two wells in GOM after Moratorium

Drilling Advisor in Angola and Nakika fields peer reviews

Leader for “Beyond America” Diversity and Inclusion team

Developed the Best of the Best drilling time database that whole BP GOM team used to develop their time and cost estimates

During execution of the wells spend time offshore as needed as a well site drilling engineer

Planned and executed wells by complying Code of Federal Regulations (CFRs) and BP Policy / Practices

Hold drill well on paper meetings and hazard identification meetings for each hole section procedures

Casing Design using Stresscheck software and Well Containment Screening Tool

Cement design for wells by creating Cement Bases of Design for wells and applying API RP65 part 1 and part 2

Worked as Wellsite leader Wells Team Leader

Worked with Subsurface team to identify distinct permeable zones and plan wells accordingly to achieve long term well integrity

Prepared and Acquired third party Casing and Cement Certification as per government requirement

Supporting the performance culture of operations to promote the Technical Limit process

Lead the Crew Engagement / Technical Limit / Knowledge Management process into the operations and demonstrate efficiency gains (time and cost) as a result of the process.

Calculate Torque & Drag, Hydraulics, LOT, kick sheet, kick tolerance, casing/tubing tallies, cementing, hole cleaning, etc.

Analyzed ECD trends and set a daily working ECD window.

Demonstrate tangible improvements in areas of HSE, cost, time, and quality for opportunities.

Seek opportunities to use risk management tools for mitigation and decision making (risk register, risk matrix, probability weighted decision trees, crystal ball etc)

Lead cost tracking system for the rig and make necessary improvements

Produce Drilling Programs for every well for the rig lines

Organize and lead pre-spud meetings and after action review meetings for every well

Perform all drilling Engineering calculations for the rig line when necessary

Incident Investigations in different riglines for drilling related failures

Onshore Drilling Engineer / Wellsite Manager

July 2006–Aug 2008

Wyoming, USA

Had the best performing rig out of seven rigs in Wamsutter, Wyoming in terms of time, cost and safety

Received recognition letter from BP CEO for my rigs Performance / Break Wamsutter drilling record

Drilled more than 40 gas wells with record performances

Drilling engineer and wellsite manager for Wamsutter wells

Initiate and lead lessons learnt meetings to improve well performances across the 7 rigs in Wyoming which contributed to utilizing the best performances.

Lead rig startup plan for new build to beat learning curve time performance metrics in terms of days/10k and cycle time.

Lead the Crew Engagement / Technical Limit / Knowledge Management process into the operations and demonstrate efficiency gains (time and cost) as a result of the process.

Lead Contractor Account Management process for services assigned. Set performance goals, track performance, and identify improvements, and create action tracker with actions assigned and completed.

Seek opportunities to use risk management tools for mitigation and decision making (risk register, risk matrix, probability weighted decision trees, crystal ball etc)

Lead cost tracking system for the rig and make necessary improvements

Produce Drilling Programs for every well for the rig lines

Organize and lead pre-spud meetings and after action review meetings for every well

Perform all drilling Engineering calculations for the rig line when necessary

Offshore Drilling Engineer / Wellsite Leader

Sep 2003-July 2006

Caspian Sea, Baku, Azerbaijan

DE / wellsite leader for HTHP Shah Deniz gas field and Azeri field oil wells

DE for Open Hole Gravel Pack, Gas / Cuttings Injection, Case & Perforated wells

Wellsite manager / leader on semisubmersible and platform wells

Part of ERD well planning and execution for Chirag platform

Presented Drilling concept of BP / Central Azeri first well to the President of Azerbaijan during his visit to the CA platform

Provided wellsite drilling engineering support that includes but not limited to: all the calculations related to well operations, hydraulics, torque and drag, LOT, kick sheet, kick tolerance, casing/tubing tallies, cementing, hole cleaning, etc.

Make Pre-Spud Meetings for the new wells

Assisted in the identification and development of the completion tools and equipment to support the batch tie-back program at platform start up.

Analyzed ECD trends and set a daily working ECD window.

Produced a “Trip Log” for use on the drill floor, indicating formation tops & type, problem zones.

Maintained a summary file of “daily events of significance” for inclusion in the final well reports

Maintained Contractor Performance Evaluation reports

Maintain equipment/materials inventory and weekly checked service companies inventory

Prepared handover notes for coming Engineer about ongoing operations, hole condition, any issues of concern (logistics, etc.), DIMS reporting, equipment onboard & any recent safety issues.

Took ownership for planning/execution of casing and cement jobs.

Recorded / shared operational and safety lessons and tracked them to ensure proper closeout.

Monitored performance and reported accordingly, making recommendations for improvement.

Provided Engineering support for the below type wells:

OHGP wells, Top set OHGP wells, Functional Cuttings Re Injection (CRI) well and CRI program, Case & Perforated wells, Expandable Sand Screen wells, Gas injector well

Wrote Re-entry completion programs for tie-back platform wells, drilling programs for oil wells

Provide engineering support for platform cuttings re-injection (CRI) well

Evaluate and provide input to selection of bottom hole locations for platform-drilled wells

Develop and revise as required the Basis Of Design and Statement of Requirement documents for key services and equipment for the platform-drilled wells. BOD’s to include: Bits, BHA’s, Directional, Drilling Fluids, Cementing, Casing Design, Tieback operations.

Interface with Subsurface team to develop Well Planning Data Package.

Optimize well design in line with cost, functionality and safety metrics.

Evaluate & propose alternative well designs & drilling technologies for successful well delivery.

Provide well-cost information for incorporation into the AFE.

Develop the execution plan for use in Technical Limit activities.

Manage & coordinate service providers’ input into well planning activities. Actively participate in contractors’ meetings to improve communication between BP and the service companies.

Prepare detailed well plans and hole section guidelines. Ensure BP HSE policies and obligations are incorporated into well design. Signed off Guidelines and Dispensations prior to spud.

Develop equipment group loadings. Facilitate scheduling & procurement requirements for wells.

Drilling Engineering Instructor

Baku Higher Oil School / Harriot Watt University

September 2018 – Current

Baku, Azerbaijan

Education:

-Massachusetts Institute of Technology (MIT)

Business Process Design for Strategic Management

SLOAN School of Management Sep 2018 - Dec 2018

-Texas A&M University, USA

Masters of Business Administration Jan 2015 – May 2018

-Heriot Watt University, UK

Drilling & Completions Engineering classes Jan 2005 – May 2006

- Qafqaz University, Azerbaijan / University of Missouri-Columbia, USA

Industrial Engineering, Bachelor’s Sep 1997 – June 2003

Trainings / Certificates:

Drilling Engineering, Completion Engineering, IWCF, Business Leadership, Management trainings.

Attached file contains all the attended trainings.

Achievements:

Bachelor’s degree Scholarship from Turkey & Russia

US Department of State scholarship to study in the USA

Service Recognition Award for Initiating & Leading Engineering & Engagement Sessions in Sunbury

“Circle of Distinctions” for achievements in Excellence, Golf of Mexico operations, Houston TX, USA

Service Recognition Awards in GOM Operations.

Multiple Service Recognition Awards in Wyoming Ops.

Chairman in SPE, Diversity group, & Challenger teams.

Track Record as an overachieving individual.

Strength / Skills:

Future focused

Project Management

Leadership

Creativity

Goal Oriented

Time Management

Critical Thinking

Communication

Resiliency

Computer Skills:

Landmark program applications, Stresscheck, Wellcat, Casing Seat, Open Wells, Wellplan, Compass, Safe Kick

MS Programs

Languages: Azerbaijan, English, Russian, Turkish

Hobbies: Swimming, Sawing, Teaching

References available upon request

Contact this candidate