Engineer Electrical

instrumentation & Control System

Engineer

DEKALI FOUAD

** ***** ***

Phone: 00-213-*-**-**-**-**

Email: ***********@*****.***

Address: BP 816 Azzouni 13003

Maghnia, Tlemcen, Algeria.

Objective

I am looking for a good position in the field of control system & instruments and automation in a company where previous skills and capabilities can be put to efficient use. Skills

Precommissioning, Commissioning, Startup rotating machine Good experience in GE Heavy dutiand Aeroderivative gas turbines Good experience in Termodyn and Pignion compressors Qualified for i.F.A.T & F.A.T & S.A.T

Deep understanding and troubleshooting skills for Mark VIe & Mark VIeS control systems Using of ToolboxST to navigate and software modification/troubleshooting of Gas turbine& compressor and auxiliary systems .

Deep experience in BentlyNevada PLC and BN3500 vibrations monitoring system Deep experience on PAC’s system GE FANUC RX3i, versamax controllers,series90-70 PLC, and Series 90-30.

Using of PME proficy machine edition to navigate and software modification/troubleshooting . Experienced in RSlogic 5000, RSlink, Factorytalk view,RSview32 Specialized in WORKBENCH (Complicity), Add new and modify existing HMI screens according to the operation needs via Proficy HMI/SCADA Cimplicity.

Strong experience in all areas of instrumentation and control engineering Strong knowledge in the unit control panel (UCP), motor Control center (MCC), Local control panel

(LCP),Firefighting system package.

Familiar with US codes and standards of API (compressors API617, lube oil system API614, Machinery protection API670, ASME PTC10 Compressor Testing). Work Experience

1) Instrumentation and Control system engineer at RENCO SPA Project:

1- Control system field service engineer in HASSI R’MEL ALGERIA – MPBOOSTING PHASE III

(10.2019 to present )

CUSTOMER : J.G.C. FOR SONATRACH

Scope of work : Commissioning phase, Assigned as control system engineer for 4 turbo compressors type MS5002D + BCL807, Mark VIe & MarVieS including TCP with industrial controllers in TMR type and consists of their own software TOOLBOX, Cimplicity in HMI, Historian. 2- Control system engineer in Algiers Refinery Site Sidi Arcine. (06.2019 to 09.2019). CUSTOMER: ALGESCO FOR SONATRACH

Scope of work : Pre commissioing, Commissioning 3 x steam turbine units with using GE FANUC RX3i PLC Unit 1: driver model SC1 4, driven model BCL458

Unit 2: driver model SC1 8, driven model AN 150

Unit 3: driver model SC1 4, driven model 2MCL456

3- E&I field service engineer in HASSI R’MEL ALGERIA – MP BOOSTING PHASE III (02.2019 to 06.2019)

CUSTOMER : J.G.C. FOR SONATRACH

Scope of work : During construction phase Ensuring all E&I activities are constructed complying with GE requirements in a professional manner., I was assigned as E&I engineer for 4 turbo compressors type MS5002D + BCL807.

4- Technical Assistance in HBK gas plant. (10.2018/ 02.2019 ) Arkad SpA Engineering, Final customer SONATRACH DP

Scope of work : Prepare 2 x reciprocating compressors for start up and for performance test, type 6SHM/3

+ Electrical driver AMI 630L6A BSNH by using control system PLC GE FANUC RX3i, VersaMax I/O, software programming PME6.0 and Proficy HMI/SCADA Cimplicity. 5- Technical Assistance in TIMIMOUN CPF SITE, Algeria (08.2018 / 10.2018 ) SAMSUNG Engineering, Final customer GTIM : SONATRACH,TOTAL,CEPSA Scope of work : Punch clearance and technical Assistance on 2 x Centrifugal compressor type BCL456 and with using Turbotronic 4 Control

System Operations (RSLogix 5000).

2) Instrumentation and Control system engineer at SSE- SIRIO SISTEMI Electtronicci S.P.A

Project:

1- Control system Engineer in Bucine prov.Arezzo Italy at T&T Sistemi (From Jun 2018 to july2018)

Scope of work :

Prepare 8 Panels for F.A.T which including Seimens S400 PLC .

Internal Test for all signals for each panel .

F.A.T for each panel with customer and final customer . 2- Control Engineer in TIMIMOUN CPF SITE, Algeria (09.2017 / 06.2018 ) SAMSUNG Engineering, Petrojet construction, Final customer GTIM : SONATRACH,TOTAL,CEPSA Scope of work : Pre commissioing, Commissioning, Start up 2 x Centrifugal compressor type BCL456 with cooperation of solar representative of 2 x Solar turbine MARS 90 with using Turbotronic 4 Control System Operations (RSLogix 5000).

3- E&I supervisor in HMD SOUTH SATELLITES Hassi messaoud Algeria (07.2017 / 09.2017 ) SSE SPA / T&T sistimi Engineering, customer JGC, Final customer SONATRACH Scope of work : Instrumentation Site survey for 8 re compressions units for HMD SOUTH SATELLITE EVAMPING PROJECT ( 8 GE TD moto compressors )

4- Control Engineer in C.I.S Center Hassi Messaoud, Algeria (02.2017 / 07.2017 ) JGC ENGINEERING, Final customer SONATRACH DP

Scope of work : Pre commissioning, Commissioning Centrifugal compressor type BCL456 + Gearbox 514793 + Electrical driver EM14A093001 by using control system PLC GE FANUC RX3i, software programming PME8.6, and Proficy HMI/SCADA Cimplicity. 5- I&C systems Engineer in HBK gas plant. (10.2016 / 01.2017) ABB Engineering, Final customer SONATRACH DP

Scope of work : Commissioning reciprocating compressors type 6SHM/3 + Electrical driver AMI 630L6A BSNH by using control system PLC GE FANUC RX3i, VersaMax I/O, software programming PME6.0 and Proficy HMI/SCADA Cimplicity.

6- Control system engineer in Ourhoud Organization O&G plant, Algeria (06.2016 /09.2016) Bonatti Engineering, final customer Sonatrach Ourhoud Scope of work : Pre commissioning and Commissioning Moto centrifugal compressor type BCL454. 7- Haoud Berkaoui HBK site, Ouargla, Algeria (03.2016/04.2016) Scope of work : Control system engineer for M.R.T Mechanical Run test 2 x reciprocating compressors type 6SHM/3 + Electrical driver AMI 630L6A BSNH.

8- Haoud Berkaoui site, Ouargla, Algeria(09.2015/03.2016) Scope of work : Revamping 2 x reciprocating compressors type 6SHM/3 + Electrical driver AMI 630L6A BSNH .

9- Haoud Berkaoui site, Ouargla (08.2014/07.2015). Scope of work : technical Assistant on 2 x moto centrifugal compressors type BCL+ Electrical driver AMI and 2 x reciprocating compressors type 6SHM/3 + Electrical driver AMI 630L6A. 3) Instrumentation Engineer at SAIPEM

Project LPG LDHP Hassi Messaoud, Algeria (02 .2012 to 09. 2013) Scope of work : support GENP team as Instrumentation commissioning Engineer on 4 x turbo compressors PGT25 plus DLE +gearbox+ centrifugal compressor 3BCL 455 . 4) Electrical and Instrumentation engineer at EPPM Tunisian company

Project oily water station in SONATRACH C.I.N.A and C.I.S center, Hassi messaoud, Algeria (04.2011

02.2012)

Scope of work : Instrumentation & Electrical commissioning engineer for 2 oily station and technical assistant during stations operating.

Education

Electronic engineer (specialization: instrumentation) Tlemcen university (2009). Certificates and training:

Field Service Engineering Training Certificate in SSE Academy, Florence Italy ( Dec 2013 to April 2014) Certificate of Electrical habilitation, electrical habilitation training at SELMAN INSTITUT Oran, Algeria 2018

Language Skills:

Arabic : Maternal / French : Median / English : Good / Italian : Notions

Contact this candidate