AJIT KUMAR SHARMA

Experience: **+ yrs.

adjy5a@r.postjobfree.com

Mobile: +91-989*******

Aspiring for a challenging career, where I would direct my knowledge and skills into a meaningful contribution towards meeting organization and personal goals.

SYNOPSIS

Designed and developed various short-term courses that act as a bridge between industry and academics.

Adept at developing and implementing new benefits, ensuring that these are current and competitive and in line with industry requirements.

Demonstrated a consistently upbeat and enthusiastic attitude; possess sound cross-cultural and excellent communication and interaction skills.

Provided students with information outside the classroom such as the prospects in the subject, the competitive exams, etc.

Arranged expert meets for students periodically to create an interest in the subject.

ACADEMICS WORK EXPERIENCE (11 Yrs)

From August 2008 to till date with Dr. Akhilesh Das Gupta Institute of Technology & Management (formerly Northern India Engineering College, New Delhi) Affiliated to GGSIP University, New Delhi.

Growth Path

Since August 2011-Till date – Assistant Professor, EEE Department

August 2008 – July 2011 – Lecturer, EEE Department

INDUSTRIAL WORK EXPERIENCE (02 Yrs)

August 2006 to July 2007 with BSES Yamuna Power Ltd. (Reliance Energy Ltd.), Delhi.

Growth Path

September 2007 – November 2007 – Executive Engineer, Metering Department

September 2006 – August 2007 – Trainee Engineer, Metering Department

December 2007 to July 2008 with GET Construction Pvt Ltd, Chennai as an Assistant Engineer.

December 2011 to 2012 with MAX Pvt Ltd, Delhi as a Co-operate Trainer (Part-Time).

JOB PROFILE

Worked in High voltage and Low voltage distribution system project which includes

Responsible for the Installation of Energy Meters -on-premises.

Involved in making a program for electrification of unauthorized areas.

Quality monitoring of different material used in electrification such as Transformer,

LT boxes, service cable, and pole, etc.

Erection and execution of L.T.M.P. (Low Tension Modernization Programme) as a measure of electrification of areas which cannot be covered by H.V.D.S. (High Voltage Distribution System Project).

Deal with Reliance Energy contractor and consumers.

INDUSTRY PROJECT

Project 1

Electrification of Rural area for DERC Karawal Nagar Delhi.

Working Capacity

Engineer

Duration

6 Month.

Role

Team Member

Responsibilities

Inter Discipline Co-ordination,

Preparation of Equipment Layout

Compilation of Bulk Material,

Preparation of MR,

Bill of Material & contractor.

ACADEMIA

Ph. D (pursuing)(2015) from Delhi Technological University, Delhi (Formerly Delhi College of Engineering, Delhi)

M. Tech (2011-2014) (Control & Instrumentation) with Ist Div. from Delhi Technological University, Delhi (Formerly Delhi College of Engineering, Delhi).

B. Tech. (2002-2006) (Electrical Engineering) with Ist Div. from Uttar Pradesh Technical University, Lucknow (U.P)

PROJECTS

Ph.D. Topic “Investigations on Modelling and Control of Nonlinear Systems”.

M. Tech Thesis - “Position Control of Two Link Robot System by using PD & Fuzzy Logic Controller”

Description:

M. Tech Projects

“Modelling & Simulation of Brushless DC Motor”.

“Comparative Analysis of Solar Maximum Power Tracking by Iterative Optimization Techniques”

B. Tech Project title “Mobile Telephonic Controller of Electrical and Electronic Equipment”.

RESEARCH PAPERS

International Journal(SCI/SCOPUS INDEX)

1.Ajit Kumar Sharma and Bharat Bhushan “Comparison of different types of fuzzy controller based sliding mode control on single link Inverted Pendulum” Journal of Intelligent & Fuzzy System, IOS Press (Accepted).

2.Ajit Kumar Sharma and Bharat Bhushan “Performance Evaluation of Sliding Mode Control for Underactuated Systems based on Decoupling Algorithm” Scopus indexed series Lecture Notes in Electrical Engineering of Springer (Accepted).

3.Ajit Kumar Sharma and Bharat Bhushan “Performance Evaluation of Sliding Mode Control for Underactuated Systems based on Decoupling Algorithm” Scopus indexed series Lecture Notes in Electrical Engineering of Springer (Accepted).

4.T. Som, A. Sharma, D. Thakur, “Effect of Solar Tilt Angles on Photovoltaic Module Performance: A Behavioural Optimization Approach” Artificial Intelligence Evolution, 90-101, 2020 Universal Wiser Publisher.

5.T. Som, M. Dwivedi. C. Dubey, A.Sharma, “Parametric Studies on Artificial Intelligence Techniques for Battery SOC Management and Optimization of Renewable Power”, Procedia Computer Science 167, 353-362, 2019.

6.Ajit Kumar Sharma, Ankita Yadav, and Bharat Bhushan. Sliding Mode Control with RBF Neural Network for Two Link Robot Manipulator. International Journal of Computer Applications 178(52):31-36, September 2019.

7.Ajit Kumar Sharma, Bharat Bhushan. Sliding Mode Cruise Control Based on High Gain Observer Journal of Emerging Technologies and Innovative Research (JETIR), ISSN-2349-5162, Volume 6, Issue 6 June 2019,

8.Ajit Kumar Sharma and Bharat Bhushan. “Sliding Mode Control of Inverted Pendulum with Decoupling Algorithm”. International Journal of Computer Applications 181(27):1-5, November 2018.

National Journal:

1.Ajit Kumar Sharma, Deepak Thakur, “Modeling and Performance Analysis of a DFIG Wind Energy Conversion System” published in online journal BPR Technologia: A Journal of Science, Technology & Modeling and Performance Analysis of a DFIG Wind Energy Conversion System Management, ISSN: 2278-8387, Volume 1, Issue 2, 2012.

International Conference:

1.A. K. Sharma, B. Bhushan, and D. Singh, "Fuzzy & ANFIS based temperature control of water bath system," 2016 IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), Delhi, 2016, pp. 1-6.

2.Sharma, A. K, Bhushan, B. (2014, December). Position control of two-link robot system by PD & fuzzy controller. In Power India International Conference (PIICON), 2014 6th IEEE (pp. 1-6). IEEE.

3. Ajit Kumar Sharma, Swati Paliwal, Piyush Sharma, "Dynamic Stability Enhancement of Power System Using Intelligent Power System Stabilizer." In Proceedings of Fourth International Conference on Soft Computing for Problem Solving, pp. 571-583. Springer, New Delhi, 2015.

National Conference/Seminar:

1.Ajit Kumar Sharma, Vandana Arora, Juhi Priyani and Amit Patel, “Design, Control and Simulation of PMSG- Based Wind Energy Conversion System, proceedings of the National Conference on “Innovative and Emerging Trends in Engineering and Technology (IETET-2019)”, pp 158-162, ISBN ***-**-****-529-4, New Delhi, 2019.

2.Ajit Kumar Sharma, Deepak Thakur, “Modelling & Simulation of Microturbine” presented in National Seminar: Recent Trends in Electrical Engineering, 2011.

AREA OF INTEREST

Control Engineering.

Electrical machines.

Power Electronics.

Basic Electrical Engineering.

IT SKILL SET

Operating System

Windows 8/7/ 98/XP

Utility Software

Lotus, MS Office

Engineering Software

AUTOCAD, MATLAB

ACADEMIC PROJECT (GUIDED at UG level)

Guided various projects at the university and college level and got a position in the top ten. Like:

Unmanned Air Vehicle

Description: This project work demonstrates the construction of an RC airplane. An RC plane is also known as Radio/Remote Controlled Airplane is a small flying machine that is controlled by a transmitter. The transmitter communicates with the receiver using radio waves and thus controls its direction and speed.

Wireless Power Transmission

Description: Wireless power transmission is based on the Nichole Tesla principle to transmit power at a short distance. In this project with the help of an inductive coil and based on the mutual inductance principle power is being transmitted.

Controlling of Robotic Arm

Description: A robot is a mechanical or virtual artificial agent, usually an electromechanical machine which is guided by a computer program or electronic circuitry. In this project, two link robot manipulator is used and by applying direct forces on them there the path is moved and control by simulation.

Design & Development of IR Tracking/ Heat Seeking Robot with Alarm

Description: In this project, the robot is used mainly for two purposes: heat-seeking and fire extinguisher. There are four sections mainly, sensor, comparator, microcontroller, and dc driver. The robot senses infrared radiation (.8µm - 1µm) and moves toward that direction. Depending on the input sequences obtain, the microcontroller performs the sequential operations and gives output decisions which are a sequence of a bit to drive the dc motor.

GPS Driven Car

Description: In this project designing an autonomous vehicle that navigates itself through the use of GPS technology and if it detects any obstacle in its path, it changes direction to avoid a collision. We used here RASPBERRY PI and interfacing it with an IC L298N as an intermediate IR sensor. Any obstacle detected in the range of 25 centimeters by the sensor, the vehicle changes its direction with the help of servo motor which helps it to move in angular position.

FDP/SEMINAR/WORKSHOP/COUNSALTANCY ORGANISED

Attended a webinar on “Strengths & Bottlenecks of Solar PV Technology” organized by Department of Electrical & Electronics Engineering, BPIT, New Delhi on dated 8th August 2020.

Attended a webinar on “Application of AI in Power Grid System” organized by IEEE PES MSIT Delhi in association with Pantech E-Learning on dated 31st July 2020.

Attended one-week FDP on “Innovative Teaching Learning Practices: Way to Transform Teachers ” organized by IITM, New Delhi on dated 27th to 31st July 2020.

Attended one-week FDP on “Python” organized by International Institutes of Professional Studies, Devi Ahilya University in association with Spoken Tutorial by IIT Bombay on dated 1st to 5th June 2020.

Convener of National Conference on “Innovative and Emerging Trends in Engineering and Technology (IETET-2019)” at ADGITM, New Delhi on 18th & 19th April 2019.

Organized a Workshop on “Virtual Labs: IIT Delhi” at ADGITM, New Delhi on 27th September 2018.

Attended one-week FDP on “Emerging Research Areas in Engineering & Technology through ICT” by NITTR from 4th to 8th June 2016.

Attended one-week FDP on “Behavioral Finance, SPSS & EVIEWS” organized by MBA Department, ADGITM, New Delhi on dated 20th May to 1st June 2018.

Member of the organizing committee of IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy System (ICPEICES) 2016, held in DTU

Co- Session Chair of IEEE 1st International Conference on Power Electronics, Intelligent Control and Energy System (ICPEICES) 2016.

Attended a National Conference on “Recent Innovations in Engineering & Technology (NCRIET-2016)” from 8th April 2016 to 9th April 2016 at NIEC, New Dew Delhi

Attended Short Term Course on “VLSI Design through ICT” by NITTR from 02 October 2015 to 09 October 2015.

Attended two days’ seminar on “Global Trends in Technology & Industry: Impact on Society(GTTI-14)” from 17th October 2014 to 18th October 2014 at DTC, Gr. Noida.

Organized a National Seminar on “Emerging Trends in Electrical Engineering” in NIEC in 2013.

Organized a National Seminar on “Emerging Trends in Distributed Generations” in NIEC in 2012.

A workshop was attended in Northern India Engineering College on the topic “DAQ” in 2011.

A workshop was attended in Northern India Engineering College on the topic “ROBOGYAN” in 2011.

ACCOLADE

Got Appreciation Letter for Best Faculty at Northern India Engineering College, New Delhi at Teachers Day, 2014.

Awarded two times for giving 100% student result.

INDUSTRIAL INTERACTIONS

PEPSICO INDIA LTD. Panipat (Haryana)

Duration : Two Weeks

UTTAR PRADESH RAJYA VIDYUT UTPADAN NIGAM LTD, OBRA (UP)

Duration : One Month

Division : Electrical Maintenance Division.

(AJIT KUMAR SHARMA)

Contact this candidate