Samer Samir Ayed Owies

Riyadh, Saudi Arabia

Mobile: 966-*********

Email: adjuo5@r.postjobfree.com

Linkedin: https://www.linkedin.com/in/samer-owies-5b719b15/ Date of Birth: 24th march 1978

Marital Status: Married

Nationality: Jordanian

T

To join a large and reputable firm where being dynamic, ambitious and creative is the key for success. B.Sc, Electrical Engineering major in System Control and Automation, East Ukrainian National University, Ukraine 2002. Senior Electrical Site Engineer.

Aug 2020 up to date.

NKY Architects & Engineers.

Project: Custodian of Two Holy Mosques the King Abdullah Bin Abdul Aziz’s Project at Qassem. Main contractor: ACC Contracting CO.

Client: Ministry of Interior.

Senior Electrical Site Engineer.

April 2017 up to Aug..

NKY Architects & Engineers.

Project: Custodian of Two Holy Mosques the King Abdullah Bin Abdul Aziz’s Project at Hail. Main contractor: El Sief Engineers Contracting CO. Client: Ministry of Interior.

Scope of Work:

Manage and lead the Junior engineers and supervisor in his discipline to carry out the required inspections & quality assurance work. Attending related testing and monitor the contractor’s site activities to compare them with scheduled activities.

Objective

Education

Work Experience

Personal Information

Responsibilities:

1. Review and approval of technical submittals and shop drawing. 2. Supervising activities on site and assuring compliance with drawing and Specs. 3. Supervision of junior engineers and supervisors to ensure following their assigned tasks and responsibilities.

4. Assuring that the correct version of drawings and specs are being used for work execution. 5. Maintaining surveillance of all project activities and where necessary, initiating corrective action in conjunction with the Area Manager to meet project quality requirements. 6. Supervision and coordination of the technical interfaces or clarifications between the different disciplines.

7. Recommending solutions for technical or constructional problem and defining the means of applying them.

8. Evaluating Contractor's performance and proposing ways for improvement. 9. Defining work plans ahead and distributing jobs to engineers and supervisors on site. 10. Collecting projects, activities and information and furnishing the Area Manager with necessary information.

11. Monitoring project progress and initiating progress and status report. 12. Ensuring compliance of the contractor with technical specifications and quality requirements. 13. Facilitating testing and commissioning and confirming as built drawings. 14. Assuring compliance with the required safety & heat requirements. Project Manager.

September 2013 until March 2017.

Triad Technical Supply TTS – Riyadh, KSA.

April 2016 – March 2017.

Project: National Guard Command and Staff College – Riyadh, KSA. Main contractor: SAUDI BIN LADEN GROUP / ACCESS for Communications & IT. Client: National Guard.

Project Consultancy: DIYAR Saudi Consultants.

September 2014 – March 2016.

Project: STC Head Quarter Monitoring System, Riyadh, KSA. Main contractor: Electric world.

Client: STC.

September 2013 – May 2016.

Project: STC Riyadh and Dammam data Centre.

Client: STC.

Scope of Work:

BMS Designing, Supplying full system, controllers (Honeywell Alerton System) with devices, programming, integration with third party commissioning and handover.

Responsibilities are:

1. Preparation, and obtaining approval of submittal, engineering and sequence of operation. 2. Coordination, design, implementation and solution providing with main contractors and their sub- contractor.

3. Coordinating with third parties and consultants. 4. Following up with the installation team and progress monitoring. 5. Lead-in programming, testing and commissioning team. 6. Management of as built drawing preparation and project handing over. Project Engineer.

April 2008 until September 2013.

Triad Technical Supply TTS – Riyadh, KSA.

Project: PNU “Princes Noura University for Women". Client: Ministry of finance.

Main contractor: Saudi Oger.

Project Consultancy: Dar Al Handasah.

Scope of Work:

BMS Designing, Supplying controllers (Honeywell Alerton System) with devices, installation, programming and integration with third party.

Responsibilities are:

1. Handling installation team.

2. Coordinating, design, implementation and solution providing with main contractor (Saudi Oger) and other sub-contractors.

3. Coordination with third parties and consultants. 4. Preparation and approval of sequin for all operation systems. 5. Lead-in programming, testing and commissioning team. 6. Management of as built drawing preparation and project handing over. Project: KAUST, King Abdullah University of Science and Technology for Women". Client: Saudi Aramco.

Main contractor: Saudi Oger.

Project Consultancy: Aramco PMT.

Scope of Work:

Project engineer for the building where commissioning and installation of the BAS/BMS system in KAUST University, Jeddah (KING ABDULLAH UNIVERSITY OF SCIENCE & TECHNOLOGY). Responsibilities are:

1. BMS design and execution team supervision, in addition to handling the commercial works such as variations and payment application.

2. Management of a Supervision team (Engineers and over 100 technicians) in addition to the installation, testing and commissioning works.

3. Providing and execution plans (look ahead) to be in line with the overall programme of works. 4. Management of as built drawing preparation and project handing over. Site Electrical Inspector.

September 2007 - March 2008.

Dar Al Handasah, Qatar.

Project: The Pearl Qatar.

Client: United Development Company DC.

Scope of Work:

Working as a Site Electrical Inspector, responsible for 3 Buildings at The Pearl Qatar project. Responsibilities are:

1- Inspection of project sites activities and material to ensure conformance to design specifications and safety standards.

2- Assisting Resident Engineer in site related issues and work progress monitoring. 3- Review and approval of the Contractor’s Documents, Material Submittals, Drawing Submittals, and Method Statement etc.

4- Preparation of Snag list / Punch list.

5- Coordination with Contractors and Other Disciplines. Electrical Site Engineer.

September 2006 - August 2007.

AL HUDA ENGINEERING WORKS, Qatar.

Project: CRUSHED STONE IMPORT FACILITIES ROADS & BRIDGES. Client & Consultant: QATAR PETROLEUM COMPANY.

SCOPE OF WORK:

The Project contains the following:

A- 3 bridges to be completed and finished with some rectifications. B- 6 pipelines culverts carrying live oil or gas.

C- Earthworks and road work.

D- The installation of all associated utilities and services which include Electrical Work such as: power substation, street lighting cables, street lighting columns with various light 12 meters to 30 meters and their bridge lighting, traffic signals with total value 16,000,000 QR.

Responsibilities:

Supervise all the Electrical Works from the installation to the testing and commissioning, also conduct with the consultant and subcontractor inspection of the work. Review of the electrical shop drawing before submission to the client for approval. Electrical Site Engineer.

January 2006 - September 2006.

EMC, Qatar.

Responsibilities:

Installation of Extra High voltage (132 KV) Underground cables under the supervision of L.G. Cable /Marubeni for KAHRAMAA phase V project.

Electrical Site Engineer.

December 2004 - December 2005.

Qatar Power Construction, Qatar.

Responsibilities:

1. Installation of Overhead lines, Tender (GTC 29/2004). 2. Implement underground cables for the end-user or client as per the technical drawings submitted from

“Kahrama” (GTC 37/2004).

3. Implement 11 KV underground cables, Tender (GTC 49/2005). Electrical Engineer.

November 2003–November 2004.

Irbid District Electricity- Irbid, Jordan.

Responsibilities:

Installation, service, commissioning and maintenance of Low voltage, Medium Voltage and High Voltage for Transformers, Overhead lines, Underground cables and Meters. Electrical Engineer.

November 2002 – November 2003.

Century Electronics Factory, Jordan.

Responsibilities:

1. Operating Fuji assembly machines that manufacture various control and communication equipment. 2. Optimizing the production machines to reduce the time cycle and increase efficiency and throughput. 3. Performing PMS.

4. Participate in quality assurance meetings.

5. Providing maintenance for production line machines. 1. Member of Jordanian Engineering Society.

2. Member of Saudi Council of Engineers

3. Microsoft Office and internet.

Arabic: Mother tongue.

English: Writing, reading, and speaking.

Russian: Writing, reading, and speaking.

General Information

Languages:

Contact this candidate