Engineer Power Plant

RESUME

SENATHIPATHI R

Contact no: +91-822*******

Email: adjrot@r.postjobfree.com

SUMMARY:

Over 5 years 8 month of experience in Field Engineering, Electrical and instrumentation panel knowledge erection and Commissioning, Calibration, Electrical and instrumentation project in control panels oil and gas, waste water treatment plant, STP, RO, VFD, SCADA, HMI, and PLC panel commissioning. Such as P&ID Review, Review of Specifications & Material Requisitions, electrical and Instrument Maintenance Field Activities etc. To performing and testing Foundation Field Bus and Hart bus communications via Modbus. Control functions, Interlocks, Sequence other components like DCS and ESD. AT PRESENT:

Organization: BRIGE AND ROOF INDIA LIMITED

Duration : 25 DEC 2019 TO 26 SEP 2020.

Designation : INSTRUMENTATION ENGINEER.

Site : Chennai Petroleum Corporation Limited, Manali, Chennai. Plant area : FCC plant(PROJECT ).

Organization: TAUMAN ENGINEERING LIMITED

Duration : 07 SEP 2019 TO 24 DEC 2019.

Designation : INSTRUMENTATION ENGINEER.

Site : Chennai Petroleum Corporation Limited, Manali, Chennai. Plant area : DHDT plant (SHUTDOWN).

WORKING EXPERIENCE:

Organization: AQUA DYNAMIC ELECTROMECHANICAL L.L.C. Duration : 27 MAR 2019 TO 11 AUG 2019.

Designation: INSTRUMENTATION ENGINEER.

Site :ADNOC(ABUDHABI NATIONAL OIL COMPANY)

Plant area: OIL AND GAS(ABUDHABI)

Organization: AQUA DYNAMIC ELECTROMECHANICAL L.L.C. Duration : 14 JAN 2019 TO 26 MAR 2019.

Designation: INSTRUMENTATION ENGINEER .

Site : CISPA (CRITICAL INFRASTRUCTURE AND COASTAL PROTECTION AUTHORITY), MIE, CMW

(COMMAND OF MILITARY WORKS) ABUDHABI. (ADNOC)

Plant area: ADNOC

Organization: AQUA DYNAMIC ELECTROMECHANICAL L.L.C. Duration :22 DEC 2018 TO 12 JAN 2019.

Designation: INSTRUMENTATION ENGINEER .

Site :ZERKU ISLAND CISPA (CRITICAL INFRASTRUCTURE AND COASTAL PROTECTION AUTHORITY)(ADNOC)

Plant area : OIL AND GAS(ABUDHABI)

Organization: AQUA DYNAMIC ELECTROMECHANICAL L.L.C. Duration : 10 NOV 2018 TO 15 DEC 2018.

Designation: INSTRUMENTATION ENGINEER.

Site : TEENA ISLAND CISPA (CRITICAL INFRASTRUCTURE AND COASTAL PROTECTION AUTHORITY) Plant area : OIL AND GAS (ABUDHABI).

Organization: AQUA DYNAMIC ELECTROMECHANICAL L.L.C. Duration : 26 SEP 2017 TO 09 NOV 2018

Designation: INSTRUMENTATION ENGINEER.

Site : AL DAFRA CISPA (CRITICAL INFRASTRUCTURE AND COASTAL PROTECTION AUTHORITY) ABUDHABI

Plant area: OIL AND GAS (ABUDHABI) (MAINTENANCE)

Organization : Hyperion IT Pvt. Ltd.

Duration : 17 AUG 2016 TO 16 SEP 2017

Designation : ELECTRICAL AND INSTRUMENTATION ENGINEER. Site : Chennai Petroleum Corporation Limited, Manali, Chennai. Plant area: FCCU PLANT (PROJECT).

Organization: Hyperion IT Pvt. Ltd. @ Chennai Petroleum Corp. Ltd., Chennai. Duration : 28 SEP 2014 TO 16 AUG 2016

Designation: ELECTRICAL AND INSTRUMENTATION ENGINEER. Site : Chennai Petroleum Corporation Limited, Manali, Chennai. Plant Area : Co-Generation Plant, Captive Power Plant (Gas Turbine Plant)(maintenance) INPLANT-TRAINING:

Company Name: INTECH SYSTEM PVT LIMITED.

Description: The training covered control system & Automation product and control panel assembly. CERTIFICATION & TRAINING:

Advanced Training in Industrial Automation in PLC, SCADA, DCS, VFD. Advanced diploma in DFMEA design Instrumentation.

Participated in DCS overview conducted by YOKOGAWA at KCET. Workshop Industrial automation workshop development “organized by HORIZON PSG College of Technology, Coimbatore. SOFTWARE SKILLS :

NAVIWORKS 2019 BIM (BUILDING INFRASTRUCTURE MODELING) 3D ELECTRICAL AND INSTRUMENTATION DRAWING.

AUTO CAD, IN TOOL, PLC (Siemens-S7-200, S7-400H, S7-1200, S7-1500), Mitsubishi Q06, Drive (vacon) (profibus) SCADA (wincc runtime professional), HMI (Fuji monitouch, wincc flexible). Communication (Ethernet, MPI, PROFIBUS, MODBUS) MS Office (Word, Excel & PowerPoint). KEY SKILLS AND EXPERTISE:

• Testing, Calibration, Commissioning and Maintenance of all types field instruments with Distributed Control Systems, Emergency Shutdown systems, Programming Logic Control and SCADA.

• Best knowledge in pre-commissioning activities, plant startup and shut down

• HMI (Human Machine Interface) - Screen designing, PLC interface, DCS interface.

• Knowledge in PID (Proportional Integral Derivative).

• Knowledge in Panel wiring.

• Performing different types of field and panel mounted Pneumatic, Electronics and Microprocessor based instruments of pressure, flow, level and temperature etc.

• Instruments and JB’s installations as per the P&I Diagrams, Cable tray installation, Cable laying, Dressing, Glanding and Termination.

• Trouble shooting the total integrated system (ESD / DCS + PLC+SCADA ) and its I/O modules

• Maintenance of sub systems like Temperature scanner (PROCON) .Familiar with operation and maintenance of zirconium probe oxygen gas analyzer.

• Coordination of work permit requests with Operations Development and coordination of work packages for maintenance requirements, including resource allocation.

• Conversant with Preparation, Verification, Identification and Implementation of the technical queries in loop diagrams, datasheets, instrument index, I/O Schedules, inter- connection diagram, Marshaling cabinet & Junction box wiring diagram, P&ID’s, Hook-up diagrams.

• Installation, Calibration, commissioning of all type of field instruments as per specification.

• Experience in the different type of instruments like Transmitters, Radar level Transmitters, Temperature sensors, Switches, Controllers, Indicators, Control Valves, Rotating Instruments and vibration sensors.

• To implement and calibrate/check/trouble shoot for Smoke Detector, U.V. Detector, IR flame Detector, Hydro carbon Detector

• Handling Latest Pressure, temperature, Vibration calibration Equipments.

• Handling Advanced Smart Field Instruments like ENDRASS+HAUSER, HONEYWELL, ROSEMOUNT EMERSON, MAGNETROL LEVEL TRANSMITTER, FLOW SERVE CONTROL VALVES and POSITIONERS.

• Experience in different HART Communicators like Rosemount 275,375, Emerson 375, for different types of SMART Transmitters.

• Knowledge on configurators like Device Type Manager(DTM), Field Device Integration(FDI)

• Perform the responsibilities of improving the production efficiency of control systems by designing standard testing procedures.

• Commissioning knowledge of Analyzers –Oxygen Analyzer high & low temperature (HT/LT), SOX/NOX/CO2 Analyzer, CO Analyzer, Opacity monitor (dust detector) in chimney.

• Good knowledge in Calibration of Motor operated valves (MOV). Like AUMA, ROTOR K, Limit torque.Experiences in different types of Control Valves with Digital Positioners like METSO, ABB,SIEMENS.

• Having good experience in maintenance and troubleshooting of weigh feeders capacity of 60tph pneumatic gates with variable frequency drive.

• Assigned the tasks of developing and testing automation systems that meet industrial standards

• Read and Review of Piping & Instrumentation Diagram.

• Preparation of datasheets for Temperature, Level, Pressure and Flow Instruments

• Preparation of Instrument Hook-up Diagrams and Instrument Wiring diagrams

• Preparation of Material requisition for Bulk MTO(Material Take Off)

• Review & approval of Vendor Offers and Preparation of Technical bid evaluation (TBE) for Instruments.

• Preparation of Instrument location plan & Cable tray layout.

• Troubleshooting PLC, DCS programming and control panel (power wiring and control wiring).

• Developing the plant monitoring technology (SCADA) for effective monitoring and maintenance activity of a plant.

• Ensuring the execution of projects within time, quality andcost closely monitoring and maintaining the quality control duringthe entire period of project execution.

• Defining inputs/ outputs for project and interface with third party device and establishing suitable communication protocols.

• Ensuring effective preparation of technical specification, floating of enquiry, receiving offer and evaluation for the electrical components required for the project.

• Overseeing project activities from conceptualization to execution including optimization, Project planning and implementation. Commissioning of AC drives and interfaces the drive with PLC and SCADA.

• Troubleshooting in electrical wiring layout & process control technique.

• Adroit in Selection of various types of instruments and electrical switch gear.

• Perform the responsibilities of improving the production efficiency of control systems by designing standard testingProcedure.

• Troubleshooting in electrical wiring layout & process control technique.

• Gas detector installation and testing.

• Work experience with project/commissioning teams for commissioning of equipments

• Maintenance of 4.2MW, Bio-Mass based power plant 11KV & 415V Electrical system by coming in round the clock shifts. Looking after the healthiness of the above system.

• Experience in different types of flameproof equipments like Motors, LCS, Light fittings, Control gears, junction boxes & LDBs in Hazardous areas.

• Trouble shooting the total integrated system (DCS+PLC+SCADA) and its I/O module.

• Adroit in Selection of various types of instruments and electrical switch gear.

• Instruments and JB’s installations as per the P&I Diagrams, Cable tray installation, Cable laying, Dressing, Gladding and Termination.

• Testing, Calibration, Commissioning and Maintenance of all types field instruments with Programming Logic Control and scada.

• Work experience with other disciplines such as Instrument, mechanical & Production for technical support.

• Best knowledge in pre-commissioning activities, plant startup and shut down.

• Work experience with project/commissioning teams for commissioning of equipments

• Experience in different types of flameproof equipments like Motors, LCS, Light fittings, Control gears, junction boxes & LDBs in Hazardous areas.

• Earthing integrity checks of electrical equipments in all areas.

• Operation and maintenance of IAC (Instrument air compressor).

• UPS system of operation like Borri, Emerson etc.

• Pre-use checks of electrical tools & portable equipments. SKILLS AND STRENGTHS:

• An energetic and focused team player and leader with ability to build cohesive, productive teams.

• Strong interpersonal and communication skills with ability to maintain effective working relationships.

• Quick earner with good analytical and problem solving skills, motivated to succeed with the desire to tackle challenging problems.

ACADEMIC DETAILS:

Bachelor of Engineering in Electronics and Instrumentation (2014). Kamaraj collage of engineering and technology, virudhunagar, Anna University, Chennai. PERSONAL DETAILS:

Date of Birth: 11th JUNE 1993

Address :guru kiruba apartment house no:1,lake area 1st street, mattuthavani bake side, madurai Languages Known: English, Tamil,hindi and Kannada. Nationality: Indian

Marital Status: single

Passport Details: Valid till 16-4-2024

DECLARATION:

I hereby declare that the information stated above is true to the best of my knowledge and belief. Place:

Date: Yours faithfully,

SENATHIPATHI.R

3. Knowledge on configurators like Device Type Manager(DTM), Device Description(DD) & Field Device Integration(FDI) is needed.

Contact this candidate