CURRICULUM VITAE (CV) FOR PROPOSED INTERNATIONAL EXPERT

6.Education:- Bachelor of Civil Engineering 2003 – Mansoura University – Egypt 7. Countries of Work Experience:- KSA-EGYPT

8. contacts 009*********** – 009*********** adjr8g@r.postjobfree.com – adjr8g@r.postjobfree.com . Skills:

- Excellent knowledge and experience in reviewing design, construction and supervision services

- Strong computer skills in Microsoft Word, Excel, AutoCAD.

- Organizing and managing design review, workshops and reports during design Phases and construction in site.

- Understanding of international engineering standards and codes like AASHTO & ASTM & BS & MOT specification.

- Solid knowledge of local rules, regulations and ability to prepare instructions, Specifications, and reports and cost estimates.

- Attending meetings and workshops with client and contractors to preparing the meeting minutes and achieving identified actions.

- Excellent written and communication skills (English), time management, and Supervisory skills.

- Ensuring work is conducted with quality control and quality assurance protocols.

• Qualification and field experiences:

I am a Resident engineer specially Bridge engineering have a membership of Saudi engineering authority and Egyptian general Syndicate ranked in professional engineer grade level, I have over 16 years' experience in construction supervision of different RC concrete bridge systems (segmental box section post tension bridge- typical box section post tension bridge- typical box section RC bridge – Tgirder deck slab bridge P.T or conventional RC). Also I have an experience in road construction as approach to the bridge or as urban roads and the required soil reinforcement and retaining walls 1- Supervising installation of bridge bearings (POT-ELASTOMERIC) and expansion joints (MECHANICAL–THERMO). 2- Supervising specialized works for rehabilitation of major and minor bridges. 3- Prepare variation (change) orders and analysis of rate varied BOQ items, project values and drafting bills of quantities and specifications . 4- Implementing quality control and quality assurance for structural concrete as per agreed Quality control plans and method statement. 5- Monitoring of PC,RC and P.T concrete works and calculations as per technical specifications, 6- Constructing of RC slabs, RC T.beams, RC box girders. 7- Supervising the construction of Embankment(Filling-Toe-Sub-grade-ABC-BBC-BWC) Layers in road works construction or for Rail way embankment works.

1. Proposed Position: -

2. Name of Firm: -

3. Name of Expert: -

Project manager / Resident engineer for high way Bridges, Road and Infrastructures (Construction Engineer)

Projacs international engineering Consulting Co.

Maged Elsaeed abdoulmoneim Youssef

4. Date of Birth: - September

29, 1980, 9

Languages skills;-

Citizenship: Egyptian

Speaking Reading Writing

Arabic Excellent Excellent Excellent

English Excellent Excellent Excellent

8- Supervising road surface dressing,asphalt mixes,line marking,drainage systems,gabions and stone patching. 9- Constructing roads in all kind of soil and in swamp area using Geotextial material. 10- Construction of group of piles, pile cap, pier and abutment shafts, pier and abutment caps, pedestals, retaining walls, wing walls. 11- Study all material submittals reports and test results. 12- Responsibility for approving of temporary designed formwork and false work as per designed loads. 13- Supervising constructions of reinforced earth walls with geo-grid as well as metallic strips tie materials. 14- Reviewing and supervising concrete box and pipe culverts. 15- Review and evaluate geotechnical investigation reports. 16- Well acquainted with drilling and blasting of rocky soil. 17- Reviewing (HSE) plans.

18- Inspect and approve source of materials and review laying techniques of concrete. 19- Reviewing shop drawings and approve bar bending schedules. 20- Guiding and checking of reinforcement and cables laying operations. 21- Quality control of concrete while laying or curing using different systems of curing (Water-steam-chemical). 22- Reviewing and calculating of surveying setting out of different structural elements. 23- Follow up the survey works for setting out all the bridge elements. 24- Monitoring the progress of work day to day coordination with client and contractors for Execution. 25- Quality control materials and compliance.

26- Assisting the resident engineer in overall project management. 27- Carry out minor modifications in design of bridges and culverts, 28- Operation management of man power, material and equipment. 29- Supervising isolation works, GRC works and concrete lining and landscaping works... 30- Review the methodology of the all bridge activities work either for executing, design, inspection and Maintenance according to renewing periodical posts of bridging works concerned authorities Like,) NHI-NBIS-AASHTO-MBE-CFR-NICET-FHWA-ABET). 31- Conversant by all data inventory for bridge inspection according to AASHTO forms. 32- Survey the quantities of all bridge elements.

33- Supervising shoring and dewatering activities for constriction of underpasses and underground pipe Line utilities according to shoring report and dewatering manual either for bridging works or Tunneling. 34- Executing of all phases of construction of temporary cofferdams and prepare all design calculations for its component elements and also shop drawing.

35- Construction of irrigation projects consist of a conveyance system, a distribution system and a drainage system and a construction of trapezoidal canal lined with concrete cast in place. 36- Construction of Duct banks as a protective means of concrete casing for data an electrical wiring which consolidated freely in special type of PVC conduits.

37- Construction of cast in situe concrete manholes which used to be collective points for ducts in or out feed lines, help for inserting of removing of wires and also protect wiring from easy contact with rains or ground water. 38- Construction of ordinary residential and administration buildings. 9. Employment record relevant to the assignment: - Period

Employing Organization and your

title/position. Contact info. For

references

Country

Summary of activities performed relevant to the

Assignment

From:

21-08-2019

Uptill now

Employer: Projacs an @ egis

Position held: project manager

Client: *PMO-holly Makka municipality.

*Riyadh municipality.

Contact Details/Reference at Client:

− Name: Taher hashad

− Telephone:009*********

Address: : KSA –RIYADH

SAUDI

ARABIA

- - Review, manage and organize any related works belongs tunnels and

- bridge contracts whether construction or maintenance for the holly

- capital -MAKKA- municipality.

- -Review, manage and read perfectly of both project contract and

- tender.

- -Organize the tasks among project team through evaluation of

- team individual’s potentials.

- -Motivate project team to get best effort.

- -Control the relation between contractor and client.

- -Receive, deliver and review any official letters, submittal,

- documents and administrative circulars’.

- -Review project plan and determine deadlines and the critical path

- for providing efficient time management (activity ahead or behind).

- -Provide contractor team by advices help maintain a schedule

- or develop.

- -Review project resources and evaluate capabilities.

- -Prepare client follow-up daily, weekly and monthly reports.

- -Prepare obstructions reports and determine solutions.

- -Review quality assurance plan.

- -Review HSE plane.

- -Review invoices and quantity schedule and compare it with time

- schedule.

- -Reviewing shop drawings for final approval.

- -Prepare for inspectors daily site walks.

- -Keep the client up-to-date by project information and

- enhance assurance for Consultant support.

- -Prepare variation orders.

From:

18-05-2018

To:

17-08-2019

Employer: Saudi consult

Position held: bridge engineer

Client: Holly Makka development authority

Contact Details/Reference at Client:

− Name: Bassam Mouslly

− Telephone:009**********

− Address: : KSA –Jeddah

SAUDI

ARABIA

-All related works for pre-stressed elements,

precast or cast in situ.

From:

01-08-2018

To:

Employer: Dar al Riyadh consultant office

Position held: resident engineer

Client: Riyadh municipality administration

Contact Details/Reference at Client:

− Name: Eng, Fouad

− Telephone:009***********

− Address: KSA – Riyadh

SAUDI

ARABIA

-Prepare for all administration coordinating between client and contractors in different issues.

-Review and study contract documents and (BOQ) also prepare for any variation or change orders.

-Reviewing and authorizing any submittals including calibration certifications for both suppliers and submittals.

-helding weekly commitments for both contractor and consultant team work.

-prepare for all weekly safety walks with both client and contractors.

-prepare and review monthly invoices for both contract payment and client duty payment sheets including assurance for quantity surveying.

10-03-2019

-prepare, review and follow up project time scheduling charts and evaluate the sequence included and its accommodation with the in site available manpower, equipment’s and materials also determine the critical path items and follow up sassurance facilities to not affect the project start and end time.

-prepare daily, weekly and monthly reports and evaluate executing progress ahead or behind.

-Reviewing and follow up all quality assurance, control documents or periodical tests, and approving its implementation mechanism.

-prepare all directional commands for contractors.

-Determining methods and procedures for Protecting roads from floods using (Culvert and Irish crossing) or any other drainage works arranging with geotechnical engineer.

From:

13-03-2017

To:

29-07-2018

Employer: Ijzala contracting company

Position held: constructure manager

Client: Ministry of transportation

Contact Details/Reference at Client:

− Name: Tamer Babers

− Telephone:009***********

Address: KSA – Riyadh

SAUDI

ARABIA

-Bored piles - pile caps.

-Shoring and dewatering- piers and piers head.

-Lifting (pre-cast girders) – deck reinforcement and form work.

-Arranging with the pre-stressing system supplier for site needs.

-Post tensioning work: - duct profile –threading -stressing- Distressing - grouting.

-Expansion joints (mechanical and thermo) whether fixing or maintenance

-Water, chemical, steam curing of concrete.

-MSE Precast Panel Retaining Wall.

-Retaining walls works arrangement with certain alignment, drainage system and connecting approach with slope protection for the rest pass of the road.

-Preparing for the approved rib rap stones and its laying out with mortar.

-Reviewing with the QS engineer for the quantities of fil and cut needed for the construction of embankment or its related side ditches.

-Following with the material engineer about the suitability of materials and the approving of barrow bits.

-Arranging for pipe and box culverts needed and its inference protection.

-Arranging for embankment Dyke and its slope protection. From:

12-01-2013

To:

28-02-2017

Employer: Euro consult

Position held: bridge engineer

Client: Ministry of transportation

Contact Details/Reference at Client:

− Name: Ahmed Sabry

− Telephone:009***********

− Address: KSA – Riyadh

SAUDI

ARABIA

-Bored piles - pile caps.

-Shoring and dewatering- piers and piers head.

-Lifting (pre-cast girders) – deck reinforcement and form work.

-Post tensioning work: - duct profile –threading -stressing- distressing - grouting.

-Expansion joints (mechanical and thermo) whether fixing or maintenance

-Water, chemical, steam curing of concrete.

- MSE Precast Panel Retaining Wall.

From:

17-10-2011

To:

31-12-2012

Employer: Saudi consult

Position held: bridge engineer

Client: Ministry of transportation

Contact Details/Reference at Client:

− Name: osama el dahman

− Telephone:009**********

− Address: : KSA – Riyad

SAUDI

ARABIA

-Bored piles - pile caps.

-Piers and piers head –pre-cast girder- Lifting (Pre-cast girders).

-Post tensioning work- damp proving and bituminous membrane.

-lining works for aprons of water crossing bridges.

-Retaining walls works arrangement with certain alignment, drainage system and connecting approach with slope protection for the rest pass of the road.

From:

28-12-2006

To:

30-9-2011

Employer: Bin Smaar contracting company

Position held: site engineer

Client: Contact Details/Reference at Client.

− Name: Mahdi

− Telephone:009***********

− Address: KSA – Riyadh

SAUDI

ARABIA

-Piers and piers head - Lifting (pre-cast girders).

-Post tensioning work -Scaffolding and form work.

-Surface treatment and concrete repair.

-Reviewing shop drawing for bridges or culverts.

-Bored piles - pile caps-pile head treatment.

-Reading of soil profiles.

-Lap and site tests for roods or concrete works.

-Shoring works.

-Isolation works.

-Cash flow charts arrangements.

-Measure, monitor and evaluate the performance of the project with respect to financial and commercial issues.

-Directing system integration and supervising different site activities.

-Assessing the required resources, Lab/Equipment for the construction of the site activities

From:

14/11/2005

To:

25/12/2006

Employer: Arab contractor company

Position held: roads and bridge engineer

Client: general authority for roads צbridges

Contact Details/Reference at Client:

− Name: Ahmed Elsaid

− Telephone: 002***********

− Address: Egypt- Mansoura

Egypt

-deck reinforcement and form work.

-damp proving and bituminous membrane.

-Directs equipment usage and responsible for equipment utilization- equipment time sheets.

-Approves and assists in the development of all applicable method statements for work scopes in their area. -Produces look ahead schedules and responsible to implement

schedule activities.

- Review and approves daily reports and daily timesheets.

-Dewatering and shoring arrangements.

-Cash flow charts arrangements.

-Preparing for invoices documents with client.

-prepare subcontractors invoices due to its type and conditions of contracting.

-Construction of the works at site as per contract drawings and approved working drawings in a timely manner.

-Coordinating with the TECHINCAL office Engineers for the preparation of working drawings as a real reflect with actual site conditions.

From:

01/12/2003

To:

10/10/2005

Employer: Nile general company for roads and

bridges

Position held: bridge engineer

Client: general authority for roads צbridges

Contact Details/Reference at Client:

− Name: Ahmed Mahmoud

− Telephone: 002***********

− Address: Egypt- Sohag

Egypt

- Bored piles - (pre-cast piles) - pile caps - shoring and dewatering- piers and piers head.

-Post tensioning work: duct profile- threading -stressing- distressing- grouting.

- Damp proving-Lap and site tests for roods and concrete works.

- Site person in charge with overall responsibility for work site.

- Provide direct oversight of subcontractors working in their area.

-Approves and assists in the development of all job hazard analysis for work scopes in their area.

- Performs daily and weekly safety walks.

- Post tensioning work -Scaffolding and form work.

- Pipe culvert works.

- prepare for setting and operating of appropriate cofferdam technique for construction under water line.

- Cash flow charts arrangements.

- prepare subcontractors invoices due to its type and conditions of contracting.

- Construction of the works at site as per contract drawings sand approved working drawings in a timely manner. From:

25/05/2002

To:

30/11/200

Employer: El Tag contracting company

Position held: site engineer

Client: ministry of irrigation

Contact Details/Reference at Client:

− Name: Mohamed el henawy

− Telephone: not available now

− Address: Egypt mansora

Egypt

- Shoring using sheet piles.

- Pre-cast piles works using steam engine.

- Bored piles.

- Pipe and pox culverts.

- Damp proving and bituminous membrane.

- Lining works for aprons of water crossing bridges using gabions.

- Cash flow charts arrangements.

- Prepare all quantity surveying sheets as a subcontractor. 11-Reference to prior Work/Assignments that Best Illustrates Capability to Handle the Assigned Tasks

***Name of assignment or project: construction of “ Oroba “ fly over bridge intersecting with prince turkey Bin Abdelaziz road:

*PROJECLOCATION: Riyadh city (KSA).

*CLIENT: MINISTRY OF MUNICIPAL and RURAL AFFAIRS – RIYADH REJION MUNICIPALITY ""KSA"".

*EMPOLYER: Projacs international engineering Consulting Co.

*PROJECT DURATION: 685 DAYS.

*PROJECT VALUE: 107,780343.00sr.

*MAIN PROJECT FEATURES: fly over bridge consist of 28 pay pre-cats girders and cast in situ slabs

***Name of assignment or project: Asphalting of Riyadh streets North regions:

*PROJECLOCATION:RIYADH REJION (KSA).

*CLIENT: MINISTRY OF MUNICIPAL and RURAL AFFAIRS – RIYADH REJION MUNICIPALITY ""KSA"".

*EMPOLYER: Projacs international engineering Consulting Co.

*PROJECT DURATION: 36 MONTHES.

*PROJECT VALUE: 123,269,055.00 sr.

*MAIN PROJECT FEATURES: THE PROJECT CONSIST OF 2.0 CONTRACTS DISTIBUTED FOR 2 CONTRACTORS, All related for asphalting of streets graded from express ways, free ways to urban roads. All these streets covering the new urban planning for Riyadh (North) region. The construction of these roads depending on layers of (S.C, S.B, BBC, BWC), also some small box culverts.

*POSITION HEALD: CONSULTANT PROJECT MANAGER, RESIDENT ENGINEER

*Activities performed:

-Responsible as a Resident Engineer for Review the Design, Supervising and management of Road project.

-Leading Site Construction Team, Office Technical Staff, Project Planning Staff and the Contract Administration staff.

-Supervising and Executing the Project as per Contract Conditions, Specifications, drawings and relevant codes.

-Responsible for Civil works, quality control, payment certification, variation orders if any.

-Reviewing and giving approvals for all submittals including shop drawing, materials and calculation, Contractors time schedule & conducting regular site progress & coordination meetings.

-Execution and management of the road project handing over.

-Overseeing the smooth flow of all Project work that assuring compliance with contract requirements and Completion of the Project on time.

-Taking the possible precautions for using the explosives, transportation and storage.

-Reporting to the client Project manager Engineer and coordinating the activities with him.

-Responsible for the successful execution of the Project and includes the following: -

* Scheduling - Quality control AND Cost Control.

* Overseeing the smooth flow of all Project work.

* Assuring compliance with contract requirements.

* Completion of the Project in time by follow up critical path items stars and end time.

* Authorization of Project correspondence and Shop drawings.

* Coordinating with the Client and the Engineers.

***Name of assignment or project: construction of fly over bridge parallel to King Abdullah road:

*PROJECLOCATION: Holly Makka REJION (KSA).

*CLIENT: Makka development authority ""KSA"".

*EMPOLYER: SAUDI CONSULT FOR ENGINEERING CONSULTANCY.

*PROJECT DURATION: 9.0 MONTHES.

*PROJECT VALUE: 65728503.687SR.

*MAIN PROJECT FEATURES: fly over bridge consist of 28 pays pre-cats prestressed girders and cast in situ slabs

***Name of assignment or project: Asphalting of Riyadh streets North and West regions:

*PROJECLOCATION:RIYADH REJION (KSA).

*CLIENT: MINISTRY OF MUNICIPAL and RURAL AFFAIRS – RIYADH REJION MUNICIPALITY ""KSA"".

*EMPOLYER: DAR AL RIYADH FOR ENGINEERING CONSULTANCY.

*PROJECT DURATION: 36 MONTHES.

*PROJECT VALUE: 64794506.667$.

*MAIN PROJECT FEATURES: THE PROJECT CONSIST OF 4.0 CONTRACTS DISTIBUTED FOR 4 CONTRACTORS, All related for asphalting of streets graded from express ways, free ways to urban roads. All these streets covering the new urban planning for Riyadh (north-wast) region. The construction of these roads depending on layers of (S.C,S.B,BBC,BWC), also some small box culverts .

*POSITION HEALD: CONSULTANT PROJECT MANAGER, RESIDENT ENGINEER

*Activities performed:

-Responsible as a Resident Engineer for Review the Design, Supervising and management of Road project.

-Leading Site Construction Team, Office Technical Staff, Project Planning Staff and the Contract Administration staff.

-Supervising and Executing the Project as per Contract Conditions, Specifications, drawings and relevant codes.

-Responsible for Civil works, quality control, payment certification, variation orders if any.

-Reviewing and giving approvals for all submittals including shop drawing, materials and calculation, Contractors time schedule & conducting regular site progress & coordination meetings.

-Execution and management of the road project handing over.

-Overseeing the smooth flow of all Project work that assuring compliance with contract requirements and Completion of the Project on time.

-Taking the possible precautions for using the explosives, transportation and storage.

-Reporting to the client Project manager Engineer and coordinating the activities with him.

-Responsible for the successful execution of the Project and includes the following :-

* Scheduling - Quality control AND Cost Control.

* Overseeing the smooth flow of all Project work.

* Assuring compliance with contract requirements.

* Completion of the Project in time by follow up critical path items stars and end time.

* Authorization of Project correspondence and Shop drawings.

* Coordinating with the Client and the Engineers

***Name of assignment or project: extension of Taif ring road: -

*PROJECLOCATION: Taif REJION (KSA).

*CLIENT: MINISTRY OF TRANSPORTATION – RIYADH REJION SECTOR ROAD DEPARTMENT ADMISTRATION “"KSA"".

*EMPOLYER: IJZALA CONTRACTING COMPANY.

*PROJECT DURATION: 36 MONTHES.

*PROJECT VALUE: 85180100$.

*POSITION HEALD: CONSTRUCTION MANAGER.

*MAIN PROJECT FEATURES: the project can be summarized in the execution of the following constructions:- 1- construction of 17.50)KMS( of 4.0 lane express carriage way embankment with asphalting layer . 2- construction of two full cloverleafe interchanges. 3- construction of continuous cantilever retaining walls on the two opposite sides of the road with different section along the kilometrage between STA(5+15.825) andSTA(5+81.152). 4- Construction of concrete side slope protection provided with rain carrier drainage system composed of pipe and box culverts collected in leveled catch basin connectors of concrete manholes and branched from interceptor ditches lined with grouted rib rap and collect drained water from discharge location of side slope at which lining replaced by grouted rib rap, entrance face of pipe culverts were designed to be shaped as rounded area matched with the inclination of side slope.

***Name of assignment or project: El Madinah el monawara 3rd ring road:

*PROJECLOCATION:ELMADINAH EL MONAEARA (KSA).

*CLIENT: (MOT) MINISTRY OF TRANSPORTATION ""KSA"".

*EMPOLYER: EURO CONSULT.

*PROJECT DURATION: 36 MONTHES.

*PROJECT VALUE: 80000000$.

*MAIN PROJECT FEATURES: The projectconsists of 8 brides(3 wadi bridges and 3 bridges on 2 directional raps and 2 cloverleaf interchanges) all cooperating forming Two interchanges(Omar ibn el khatab&makka- el madina road) intersecting with 3rd ring road around El Madinah el monawara, open and closed abutments are used, different systems (pre-cast girders and box sec type)for supper structure rested on elastomeric and pot bearing . (P.T) for all deck slabs systems, using (OVM) pre-stressing systems. Interchange No.4 BR LEG 1:is a one directional normal wadi bridge on directional ramp oflength 335.0ms and width 16.27ms arranged in 9-pays constructed using 90 precast (P.T) "T" girders tensiled with 3 cables in which 17 strands of15.24mm DAI (17T15.24) with two live ends for super structure deck slap system rested on 180 elastomeric bearings with mechanical expansion joints of quantity 162.7ms, Sub-structure consist of 8 piers(Trapozoidal pier cap rest on 6- circular columns of 1.30Ms dia ) and 2 open abutments (abutmentcaps rested on 4-REC sec taperd columns with cantilever wing walls) with 5136.0 m2 damp proving isolating shallow foundation. Super-structure deck slab isolated with one layer bituminous membrane sheets Road approaches slopes protected with concrete lining, 2- approach slaps of length 4. 0ms for entrance and out let for every direction, Bridge sideways barriers consist of 670.0ms cast in site parapet of 0.90ms height, Using of 6284m2 riprap stone for reducing scour effect of wadi water stream,

El Hegra Interchange : is a joint less two directional skewed full cloverleaf interchangeof width 27.33ms and length 64.0ms passing over (Madinah-Maka) express road way by 2 pays each constructed using post tensioning of 72 precast

"T" girder for super structure deck slab system rested on a 144 elastomeric bearing pads with deck expansion joints of mechanical type (single strip rupper), for sub-structure pier(pier cap rested on 4-circular columns of 1.30ms DIA)and two closed abutments shafts with wing walls rested on shallow foundation, Super and sub structure isolated with bituminous membrane sheets. ( P.T ) T. GIRDER each tensiled with 2 cables in which 16strands 15.24mmdia (16T15.24) of one live end, Road approaches slopes protected with concrete lining, 2- approach slaps of length 4.50ms for entrance and out let for every direction, Bridge sideways barriers consist of 120.0ms precast parapet of 0.90ms height.

*POSITION HEALD:SeniorBridge engineer and RE assistant .

*Activities performed:

-Supervising steel and form works for all elements.

-Reviewing shop drawing for bridge elements.

-Well reading for soil profiles.

-Supervising steel and form works for all elements.

-Super vising footing isolation.

-( P.T ) T. GIRDER steel, form work and P.T WORKS duct alignment, threading, stressing,destressing and grouting.

-Leveling calculations for bearing pads and its plinths.

-Reviewing and approving for different material submittals using for bearing and expansion joint.

-Super vising bearing and expansion joints erection.

-Lifting (pre-cast girders) - Expansion joints erection.

-Review the methodology of the all bridge activities work.

-Survey the quantities of all bridge elements.

-Follow up the survey works for setting out all the bridge elements.

-follow up the quality control of concrete works.

***Name of assignment or project: Interchange at entrance of prince Mohamad bin Abdul-Aziz international airport "" El Madinah el monawara"".

*PROJECLOCATION:ELMADINAH EL MONAEARA (KSA).

*CLIENT: (MOT) MINISTRY OF TRANSPORTATION ""KSA"".

*EMPOLYER: EURO CONSULT.

*PROJECT DURATION: 18 MONTHES.

*PROJECT VALUE: 20000000$.

*MAIN PROJECT FEATURES: Is a two direction skewed 5- lanes and 2-shoulders arranged in 2-pays joint-less full cloverleaf interchangeof length 35.0ms and width 27.50msof every pay passing over old

(Madina-Qassim) road, The bridgeconstructed using post tensioning of 44"T" girder for super structure deck slab system rested on 88 elastomeric bearing pads with deck expansion joints consist of mechanical joints(single strip rupper) of total quantity 111.0ms, Sub-structure consist of one pier(pier cap rested on 5-circular columns of 1.50ms DIA)and two closed abutments shafts with wing walls rested on shallow foundation constructed on soli replacement cyclopean concrete of 692.0m3 in every direction, Super and sub structure isolated with 8751.0m2of bituminous membrane sheets. ( P.T ) T. GIRDER each tensiled with 3 cables in which 19 strands 15.7mm DAI (19T15.7) with two live ends and total pre- stressing steel quantity 103.55tons, Road approaches slopes protected with concrete lining, 2- approach slaps of length 4.50msfor entrance and out let for every direction, Bridge sideways barriers consist of 164.0ms cast in site parapet of 0.90ms height for every direction, Using of 1683tons total quantity of grade 60 steel, Total quantity of concrete used 9198.440m3 with different grades, A 13864.0m3total quantity of structural excavations for bridge sub-structural footings.

*POSITION HEALD:SeniorBridge engineer and RE assistant .

*ACTIVITIES PERFORMED:

-Reviewing shop drawing for bridge elements.

-Well reading for soil profiles.

-Supervising steel and form works for all elements.

-Super vising footing isolation.

-( P.T ) T. GIRDER steel, form work and P.T WORKS duct alignment, threading,stressing, destressing and grouting.

-Leveling calculations for bearing pads and its plinths.

-Reviewing and approving for different substances using for bearing and expansion joint.

-Supervising bearing and expansion joints erection.

-Review the methodology of the all bridge activities work.

-Survey the quantities of all bridge elements.

-Follow up the survey works for setting out all the bridge elements.

-follow up the quality control of concrete works.

***Name of assignment or project: El Madinah el monawara – Tabouk express way road (3rd stage).

*PROJECLOCATION:ELMADINAH EL MONAEARA (KSA).

*CLIENT: (MOT) MINISTRY OF TRANSPORTATION ""KSA"".

*EMPOLYER: EURO CONSULT.

*PROJECT DURATION: 48 MONTHES.

*PROJECT VALUE: 6133333$.

*PROJECT CASE: under construction.

*MAIN PROJECT FEATURES: is a two direction skewed 4- lanes and 2- shoulders arranged in 8-pays wadi bridgeof length 160.0ms and width 19.10msconstructed using 176 RC "T" girders of length 20.0ms for super structure deck slap system rested on 352 elastomeric bearings with deck asphalt plug multiple thermo expansion joints of quantity 179.0ms for every direction, Sub-structure consist of 14 piers(Trapozoidal pier cap rest on 4- circular columns of

Contact this candidate