PROFILE

** ***** ** ********** ** the electrical industry. Has senior level role of Project Management, Engineering Procurement and Construction and Engineering Procurement Construction Project Management with Epcor, Enmax, Fortis Alberta and Manila Electric Company. Expert in the design and estimate of UG, OH transmission, distribution and street lighting facilities. Expert in the standard development for transmission and distribution lines using international standards (i.e. ANSI, IEC, ISO and CSA). Has experience for developing processes in the Oil and Gas industry such as project scoping, estimating, development of design framing documents and specification of major distribution electrical equipment for SAGD projects. Experienced in design of Renewable Energy Power Generation (Wind & Solar).

EDUCATION

ASSOCIATION

Bachelor of Science, Electrical Engineering NO. 3-1138 S 1982

BSEE CLASS 1982

Saint Louis University

APEGA, Professional Member

#124633

APEGBC, Professional Member

#38701

APEGS, Professional Member

#27416

ASET, Certified Engineering Technologist

June 1, 2007

Professional Elect’l Engr, Philippines, Professional Regulation Commission

#PEE 2416

Electrical Technical Courses:

-PLS CADD, Spida Calc 6, Quick Pole (2017-2018)

Utilitek Solutions, Edmonton AB

-Distribution & Transmission Design Software’s (2005-2016) ALD, DSA, ALCOA SAG 10, PULL PLANNER 3000, AGi, LUXICON, VOLTAGE DROP, DESIGN CALCULATORS, ETC.)

Fortis, Enmax & Epcor Utilities

-Power Quality & Protective Relaying (1998)

Manila Electric Company

-Substation Automation (1998)

Manila Electric Company

-Streetlights Photo Control & Lamp Courses (1997)

GE North Carolina & Cleveland, Fisher Pierce, Boston USA

-Modelling and Analysis of Modern Power Systems (1991 – 1992)

University of the Philippines

EXPERIENCE

Principal Engineer Distribution

Cana Energy Ltd.

03-2019 – 04-2020

Service Contract Manager for Fortis Alberta and Atco Distribution Projects including invoice, and cost approval to projects.

Monitors, suggest revisions, and implement the agreement of the provisions of the engineering and design deliverables of the distribution MSA of existing and prospective clients.

Manages and supervises a team of engineers, drafters and project administration personnel taking care of Atco and Fortis Alberta distribution projects.

Scope, Estimate, Site Checks, Review, Approve, Sign and Stamp all distribution construction packages of clients.

Assists the Cana Director of Engineering in the bidding of projects.

Assists other Cana Principal Engineers of different competency as required.

Assist the Cana Director of Engineering in the project load and labor forecast of the company.

Acts as Management representative to the Cana distribution team for future company directions.

Other special responsibilities assigned by the Cana Director of Engineering.

Projects involved are as follows:

Issued the construction packages of more than eighteen (18) 2018 Asset Maintenance projects of Fortis Alberta having a total capital value of more than $7,000,000 million.

Issued the construction packages of more than thirty - five (35) 2019 Asset Maintenance projects of Fortis Alberta having a total capital value of more than $11,000,000 million.

Issued four (4) construction packages of pole replacements projects to Atco Electric Ltd with more than 500 poles in four (4) months.

Issued twenty (20) locations of OH distribution line conversion to UG line across Hi-Way #43 for Atco Electric Ltd.

Sr. Engineer and Designer

Utilitek Solutions Inc.

03-2017 – 12-2018

Team leader and supervisor of engineers, EIT, technologist and drafters who handles the design of aerial and UG power distribution and communication loads in the utility service areas of EPCOR in Edmonton Alberta.

Designs, issue projects to construction and approves the attachments of new communication loads to the existing EPCOR distribution facilities to implement the EPCOR Joint-Use projects with TELUS and Shaw.

Hires and lay-off employees for Utilitek Solutions.

Listed as responsible member for Utilitek Solutions in APEGA.

Acts as Director and Principal Engineer of the company when the owner is on vacation.

Projects involved are as follows:

Joint – Use TELUS Classic W.O. 256293, 2656096, 2657391, 2660066, 256296,2655236 etc.

FSA EPCOR Joint-Use projects with TELUS and Shaw JSPL 3061A, JSPL 3121A, JSPL 2081A, JSPL 3101A etc.

FSA EPCOR Joint-Use projects with TELUS and Shaw BNDN 1034A, BNDN 2053A, BNDN 1052A, BNDN 1011A, BNDN 2013A, BNDN 1061A, BNDN 3052A, BNDN 3043A, etc.

FSA EPCOR Joint-Use projects with TELUS and Shaw LNDM 1091A, LNDM 1072A, LNDM 1021A, etc.

FSA EPCOR Joint-Use projects with TELUS and Shaw LDDY 2011A, LDDY 3042A, LDDY 3092A, etc.

Sr. Engineer, Team Lead and Designer

Stantec/Caltech Utilities

01-2009 – 03-2016

Signs and stamps Issue for Construction overhead and underground Enmax Power Corporation system and customer related distribution projects.

Designs Enmax Power Corporation system and customer related projects.

Team Lead and Sr. Engineer leading and supervising engineers, technologist and designers designing SAGD (Steam Assisted Gravity Drainage) distribution projects in Foster Creek, Alberta Canada.

Spearheaded the scoping, estimating, designing, standards development, drafting, document control, procurement technical assistance and construction support to successfully release and construct projects of the client in a muskeg environment.

Designs numerous voltage conversion projects, distribution line extension, commercial distribution project applications, street lighting projects, system reliability improvement, feeders upgrade and relocation of complex system projects for Fortis Alberta.

Projects involved are as follows:

Design Install 25 kV 47.114 new feeder for Enmax Power Corporation WR-34519

Reconductor E of 14 street and Southland Drive SW for Enmax power Corporation WR-34710 / 34711

Design Install 25 kV 47.115 Part 1 new feeder for Enmax Power Corporation WR-37199

Design Install 25 kV 47.115 Part 2 new feeder for Enmax Power Corporation WR-37362

Reconductor portion of 8.33.11 E of 14 St. 109 Ave. SW for Enmax power Corporation WR-35524

Design Oil and Gas 25kV distribution service pad to Cenovus E20 pad

Design Oil and Gas 25 kV distribution service pad to Cenovus EAP CP015 pad.

Design Oil and Gas 25 kV distribution service pad to Cenovus EAP 9017 pad.

Design Oil and Gas 25 kV distribution service pad to Cenovus EDI pad.

Design Oil and Gas 25 kV distribution service pad to Cenovus E16 & E17 WW pad, etc.

Design numerous Street lighting projects for Fortis Alberta Alberta using AGi and Luxicon lighting software in Lake Louise, Hi-way #1 and various municipalities within the Fortis Alberta service areas.

Design the system reliability improvement of 12 MP-179L Crowsnest Pass system feeder of Fortis Alberta.

Design the upgrade of Rimbey 297 10 kilometers double circuit of 477 distribution line for Fortis Alberta.

Design 25 kV feeders termination at the Altalink Rimbey substation using switching cubicles for Fortis Alberta.

Design the more than six (6) kilometers of Fortis Alberta 25 kV distribution feeders at Frank Slide from an in-accessible terrain to accessible alignment to improve system reliability.

Sr. Electrical Designer

Hemisphere Engineering

11-2005 – 01-2009

Sr. Designer acting as Quality Control and Checker of all distribution projects of the company.

Design Fortis Alberta distribution projects and trains new designers.

Site checks all propose distribution projects assigned to Hemisphere Engineering.

Train new designers in using the design softwares of Fortis Alberta such as ALD, SAG 10, DSA, CABLE PULL CALCULATION, SWING CALCULATION etc.

Project Manage all assigned Fortis Alberta Distribution projects.

Projects involved are as follows:

Design more than six (6) kilometers of street lighting and distribution facilities for Alberta Park using IESNA lighting standards.

Design more than 22 kilometers of 25 kV distribution line for Fortis Alberta to serve Shell Canada 2 MVA loads at two oil and gas sites.

Design more than 10 kilometers of 25 kV distribution line for Fortis Alberta to serve Alta gas 4 MVA oil and gas load.

Design numerous customer related 25 kV distribution projects for Fortis Alberta.

Design numerous system improvement 25 kV distribution projects for Fortis Alberta.

Superintendent

Manila Electric Company

07-1983 – 08-2004

Superintendent of Network Planning and Construction Process of Manila Electric Company.

Supervising Design Engineer for Transmission and Distribution Lines Office of Manila Electric Company.

Sr. Design Engineer at Major Line Design Office of Manila Electric Company.

Assistant Design Engineer at Major Line Design Office of Manila Electric Company.

Design Engineer at Major Line Design Office of Manila Electric Company.

Jr. Design Engineer at Major Line Design Office of Manila Electric Company.

Projects involved are as follows:

Completed the development of numerous company Electrical Codes related documents for the safe practice of electrical engineering related to transmission, distribution, substation and street lighting facilities of the company.

Completed the Design and Construction conversion of High Pressure Mercury Luminaires to High Pressure Sodium. Completed the Streetlight Modernization program of Manila Electric Company.

Acted as Test Witness in the procurement of MERALCO streetlight high mast lighting luminaires, photo controls, ignitors and roadway lighting luminaires to assure conformance to IESNA standard.

Design numerous OH and UG transmission, distribution, substation and streetlight projects.

Design numerous transmission and distribution projects using wood, concrete and steel poles (PT Jean, Sumitomo).

Designed Renewable Energy Power Generation related to Wind & Solar power.

Contact this candidate