Engineer Civil
Resume:
JEFFY F. AMOROSA
Bridge/ Structural Engineer
Date of Birth August 28, 1974
Year of Experience 24
Contact Details adjhvs@r.postjobfree.com
Nationality Filipino
Language & Degree
of Proficiency
English – Excellent
Filipino – Excellent
Education &
Qualifications
Master of Science in Civil Engineering, 1997-1999 (Academic Units) Technological University of the Philippines, Manila Bachelor of Science in Civil Engineering, 1996
Polytechnic University of the Philippines, Manila
Professional
Affiliations/
Registration
Registered Civil Engineer No.0077264
Registered ASEAN Engineer No.8051
Association of Structural Engineers of the Philippines (ASEP) Philippine Institute of Civil Engineers (PICE)
America Society of Civil Engineers (ASCE)
Filipino Planning Engineers Association (FPEA)
Summary of
Experience
About 24 years working experiences in the field of civil and structural engineering. Currently engage for 9 years in highway structure asset management for Qatar government to implement their effective highway network maintenance strategy emphasizing on network safety and serviceability to prolong structures service life. Performed feasibility studies, detailed design, and technical due diligence including tender design evaluation, design calculations and rehabilitation of various plants, rail & road bridges and power plants, for 3 years. Also, assigned abroad as a design engineer to performed detailed engineering services, design reviews of construction plans on both underground and overground station rail stations for Singapore and Dubai for more than 2 years. A short stint as a structural detailing analyst in the production of shop drawings for various residential, commercial buildings, airport and towers (including Burj Khalifa) in Dubai. Engaged in the detailed design review, bridging materials logistics, and project management of the President’s Bridge Program and Bridge Construction/ Replacement Project for DILG and DPWH for almost 5 years. Lead civil engineer in the project management, construction, design of residential, airports and multi-story commercial buildings and shopping mall for 5 years.
Employment Record:
April 3, 2011 to
August 31, 2020
Structural Engineer – 1
Bridge and Structures – Safety Operation and Traffic Control (SOTC) Ashghal Assets Affairs Salwa Office, Doha, Qatar
March 13, 2006 to
March 25 2011
Sr. Civil Engineer - Structural
Parsons Brinckerhoff Phils., Inc.
19F OMM-Citra Bldg., 39 San Miguel Ave.,
Ortigas Center, Pasig City, Philippines
September 1, 2005 to
February 28, 2006
Structural Engineer/ Senior Detailing Analyst
NAS Construction, Inc.
R.C. Gonzales Compound, Amang E. Rodriguez Ave.,
Manggahan, Pasig City, Philippines
August 2000 to
January 31, 2005
Civil/ Structural Engineer/ Logistic Assistant
Waagner Biro Philippines, Inc.
19/F Trafalgar Plaza Bldg., H.V. Dela Costa St. Salcedo Village Makati City, Philippines
May 2, 2000 to Project Engineer
JFAmorosa – CV 2/ 11
August 31, 2000 KFC Quick Service Equipment Service Scout Santiago cor. Marthon St., Quezon City, Philippines May 3, 1996 to
January 30, 2000
Structural Designer and Civil Engineer
Alfredo C. Jumalon, Jr. & Associates
Rm. 301, KYG Building 636 Tello St., cor. Juan Luna St. Tondo, Manila, Philippines
Summary of Qualification:
x Manage and supervise structural consultant and contractors in accordance with the contract documents (including IFC) and project specification. x Review expressway projects from conceptual design to detailed design for structural compliance with QCS, QHDM, DMRB, AASHTO, Eurocode and PWA Interim Advice Notes (IAN).
x Engaged in the tender documents preparation such as ITT, Project Brief, Project Specification and BOQ submitted to Tender Committees x Review and approved construction methodology and procedures. x Reviewed the structural drawings issued for construction (IFC) for any discrepancies consistency, accuracy and workability of the details complying with project specifications.
x Evaluate and assess the design departure from standard and industry best practice. x Engaged in the review and comments of complete set of the structural, architectural, mechanical, electrical, combined services drawings (CSD) and structural – electrical
– mechanical (SEM) drawings.
x Performed structural analysis and design calculation complies with set international codes.
x Prepare design review comment reports for designer and consultant consideration. x Coordinate and meet with other designer, consultant and contractors to discuss design conflicts and resolve issues.
x Ensure the proper handover of structures by preforming series of inspections includes preparation and closing of snags.
x Aggressively explain and coordinate with PMC, contractors and designers the importance of document records list during handover over. x Encourage PMC and contractor to disclosure any event of importance, major NCR and major HSE issues that would be vital later on during operation and maintenance of such structures.
x Review and verified the material approval request (MAR) incompliance with QCS, Eurocode and best practice.
x Coordinate and liaise with other government agencies, consultants, designers, contractors, stakeholders and etc. for structural and construction issues with regarding safety and public interest.
x Conduct and attend the request for inspection (RFI) to verify works, BOQ estimates, plant and testing
x Performed materials cost estimates and budgetary forecast estimation. x Prepare structural inspection report and condition rating including recommendation. x Prepare structural assessment analysis report to verify structural integrity. Professional Experience:
May 2017 to August
2020
Structural Engineer – 1
Routine Maintenance and Emergency Repair Works for Highway Structures
(C/2017/53), (Doha, Qatar)
The project is for the repair maintenance and emergency repair services of highway structures for Qatar highway network for the period of 3 Years which commenced on 8 May 2017 and to be completed on 6 May 2020, amounting to QAR 11,808,867.00, the works includes routine maintenance works for highway structures as per the Engineer’s requirements. Emergency repair works for highway structures on an on-call basis. x Manage and monitor structural maintenance contract schedules and expenditure. x Signed and approved the traffic diversion plan (TDP) in compliance with the PWA Work Zone Traffic Management Guide (WZTMG).
x Review contractors HSE quality procedures and implementation Safety Team compliance.
x Involves the preparation and approval of the work orders and site instruction. x Conducts weekly coordination meeting with contractors. x Review and approved BOQ estimate and billings report. x Conduct and attend the request for inspection (RFI) to verify works and BOQ JFAmorosa – CV 3/ 11
estimate.
x Prepared a third party claims damage and repair estimate report to be submitted to Section Head Manager for approval.
x Conducts routine, special, general and principle inspections of bridge structures. x Review and approve abnormal loads assessment applications. April 2012 to August
2020
(Intermittent Duties)
Structural Engineer – 1
Structural Handover Inspection (Doha, Qatar)
Identified as the led engineer in the undertaking of the structural handover of structures by conducting a thorough audit and evaluation of the submitted record document requirements, performing a structure inventory and inspections, preparation of the snag list reports.
x Ensure the proper handover of structures by preforming series of inspections. x Aggressively explain the importance of document records list for the submission. x Coordinate and meet with other engineering disciplines to resolve issues. x Attend the bridge loading activities, maintenance training and structural mock-ups. x Audit and evaluated the final dossier requirements being submitted. x Preparation of the snag list reports and discuss with other concern engineers. x Facilitate and monitor the overall handover activities of the structural group. x Undertake Qatar Rail projects inspections related to PWA structures interface. November 2016 to
December 2016
Structural Engineer – 1
Bridge Management System Tender Technical Evaluation
(AA/R/14-15/OM/042P1/G), (Doha, Qatar)
The project is for the procurement of globally recognize Bridge Management System that will assist Ashghal into an effective manage of its vast highway structures assets with a period of 2 years working on-line, amounting to QAR 6,000,000.00. This includes bridge inspection certification course for staffs, inspection services and BMS user training. x Participated in the technical evaluation of six tender submissions which offers different BMS flat form that is globally recognize in which the government of Qatar will be relaying to for its highway structures management. x Identified to lead the BMS system operation administration. October 2016 Structural Engineer – 1
Product Approval Request - HUB Gantry and Traffic Poles Lusail, Qatar
x Review the product approval request design calculation and drawing details, if it complies with the latest ITS Section Standard, QCS, QHDM, DMRB, AASHTO and IAN's.
x Prepared the design review report which includes the foundation check. x Meet with the requestor to discuss their issues and submittal deficiency. September 2016 Structural Engineer – 1
P015: 6Meter Street Lighting Pole Footings
Doha, Qatar
x Conduct factory site visit for the pole foundation production. x Involve in the design review of the typical foundation details that were being used in the factory.
x Prepared the review comments and recommendation of the findings in the design drawings and observation at the site in compliance with Street Light Section and PWA Standards.
November 2015 Structural Engineer – 1
Post – Incident Structures Special Inspection and Assessment Report, For intense rainfall on 25 November 2015. (Doha, Qatar)
Participated in the post incident inspection and assessment of bridges and underpasses. x The tasks focus in the in-depth ocular inspection of water leakages in the structures that might affect the critical structure elements functionality due to water intrusion during intense rainfall.
x Prepared a detailed inspection report for the managers. x Prepared a repair recommendation complying with the Qatar Construction Standard JFAmorosa – CV 4/ 11
(QCS).
September 2015 EAMS – Maximo Trainor
Maximo – EAMS
EAMS – Maximo Trainor, the latter is a full asset management program that handles the asset identification, work orders, BOQ’s up to project billing process that manages the whole Qatar’s Structures which is integrated to the Bridges Management System. x Identified as one of the Change Champions which promote the use of EAMS within Ashghal ROMD community.
x Recognized as an EAMS Trainor to guide, assist, resolved and help other co-workers in dealing the in and out of EAMS individual process and nominate issues to be report the EAMS IT for their resolution.
June 2015 to May
2019
(Intermittent Duties)
Structural Engineer – 1
Qatar Rail, Post Tunneling Construction (Doha Qatar) Involve in the monitoring and review of the TBM post tunneling construction condition surveys for Gold Line and Green Line of the Qatar Rail rail system. May 2015 to July
2016
(Intermittent Duties)
Structural Engineer – 1
Expressway Projects Structural Design Review
(Doha, Qatar)
The proposed expressway projects from agency Infrastructure Affairs, Expressway Design submits all the design drawing to Road Operation and Maintenance Department for structural design and maintenance issue.
x Review expressway projects from conceptual design to detailed design for structural compliance with QCS, QHDM, DMRB, AASHTO, Eurocode, and PWA Interim Advice Notes (IAN).
x Assess the maintenance constraints features of the critical bridge components. x Review structural drawings for consistency, accuracy and workability of the details. x Evaluate and assess the design departure from standard application. x Meet with other structural designer to discuss design conflicts and resolve issues. x Prepare review comment reports for designer and consultant consideration. x Conducts ocular inspection of structures and identification the probable cause of defects found.
x Prepared structural rectification calculations and recommendations in compliance with the Qatar Construction Standard (QCS).
x Prepare structural design calculations for in-house design requirements. x Evaluate the material approval requests for committees’ approval. August 2014 to April
2015
Structural Engineer – 1
Routine Maintenance and Emergency Repair Works for Highway Structures
(AA/ROM/2015/4C1/G), (Doha, Qatar)
The project is for the repair and maintenance service of highway structures on ad hoc basis to be provided to the agency for the period of 3 Years, amounting to QAR 10,000,000.00, the works includes routine maintenance works for highway structures as per the Engineer’s requirements. Emergency repair works for highway structures on an on-call basis.
x Participated in the technical evaluation of this tender document. x Nominated to become the Project Coordinator which will manage the project. x Lead the draft preparation of most of part of this tender document such as ITT, Project Brief, Project Specification and BOQ for submission to Tender Committees. November 2013 to
July 2014
Support Engineer
Emergency Repair of Highway Structure (C2013/75)
(Doha, Qatar)
The project is for the emergency and maintenance service to be rendered to the agency for 2 years, amounting to QAR 9,574,745.38 which was awarded to Qatar Construction Technique Co. (QCTC). The project entails the repair and maintenance of highway structures on ad hoc basis for prescribed period mentions, repair of 5 bridges and underpasses as per the project brief to be completed in July 2015 and respond to emergency calls.
x Participated in some interim management and supervision maintenance as an JFAmorosa – CV 5/ 11
alternate support engineer.
x Involves the prepare work orders for the contractor, review estimate, review traffic diversion plan (TDP).
x Conduct and attends to the request for inspection to verify works complying with the approved repair methodology and other governing quality standards set by the agency.
July 2013 to June
2016
(Intermittent Duties)
Structural Engineer – 1
On-Call Consultancy Services For Assessment of Highway Structures (Contract No
- P2013/ 17), (Doha, Qatar)
The contract is for the consultancy service to be provided to the agency for 3 years, amount to QAR 4,783,335.00 which was awarded to KEO International Consultants
(KEO). To conduct various investigations of highway structure assets under the agency jurisdiction for any principal inspections, general inspections, abnormal loads assessment, structural assessments and severe bridge strike assessment. x Involved in the management and supervision of the consultancy contracts. x Review and evaluate the undertaken routine, special and general inspections of structures reports.
x Reviewed and evaluate the structural assessment reports submitted by the consultant for approval by the Sr. Engineer.
May 2013 to June
2013
Structural Engineer – 1
Highway Structures Referencing System and Identification Marking Procedure Rev.04, (AAR-AMPR-061)
Is a procedure to guide the agency on systematically identification of the highway structures in the highway network.
x Pioneered and envisioned the identification of the geographical locations of all highway structures and plotted each in a geospatial map. x Developed a structural referencing unique to Qatar based on international practice. x Prepared a manual procedure for the adaptation in the Structural Asset Management and later be used in the BMS.
April 2013 Structural Engineer – 1
Post-Earthquake Inspection Report
(Doha, Qatar)
The report were conducted on two separate occasion on the same month first quake was on April 9, 2013 M6.3 EQ, Southern Iran and on second quake on April 16, 2013 M7.8 EQ, East of Iran near Iran-Pakistan Border Region. x Performed a post incident inspections of various bridge structural elements as such expansion joints, bearings, decks, MSE Walls, abutments, piers, girders and others. x Work focus on an in-depth ocular inspection of structures’ previous defects and new damages develop due to quake.
x Prepared a detailed report outlining the conditions of the each damage sustain during the earthquakes.
x Prepared a retrofit recommendation complying with the Qatar Construction Standard
(QCS).
May 2012 to March
2013
Structural Engineer – 1
Structures Data Management Procedure Rev. 01 (AAR-AMPR-068)
(Doha, Qatar)
Is an interim data management procedure as a guide for the future data migration upon the procurement of suitable BMS.
x Organized the document records of the structures. x Develop the interim bridge and structures registry record. x Prepare a functional folder system and correspondence filling system for the pertinent documents of the structural section.
x Composed a data management procedure.
March 2012 to April
2012
Roads Network Structures Assets Engineer
High Masts and Street Light Poles Structural Inspection and Assessment (Doha, Qatar)
x Involved in the structural assessment of the street light structures as such the poles JFAmorosa – CV 6/ 11
anchor bolts and foundations.
x Performed an in-depth ocular inspection of the fabricated foundation and identify the probable cause of defects found.
x Prepared a detailed report outlining the condition of the each pole structures. x Make a recommendation for structural rectification based on the Qatar Construction Standard (QCS).
December 2011 to
June 2013
(Intermittent Duties)
Roads Network Structures Assets Engineer
Pre and Post Contract Professional Consultancy Services for Assessment of Highway Structures (Contract No - P2011/21)
(Doha, Qatar)
The contract is for the consultancy service to be provided to the agency for 2 years, amount to QAR 11,640,566.22 which was awarded to Arab Consulting Engineers (ACE). To conduct detailed investigation and structural Assessment of 13 structures. And the supervision consultant of Contracts C1 and C2.
x Involved in the management and supervision of the consultancy contracts. x Reviewed and evaluated the undertaken general inspections and principal inspection reports.
x Reviewed and evaluate the structural assessment reports submitted by the consultant for approval by the Sr. Engineer.
x Performed structural analysis to verify the structural assessment values presented in the reports,
April 2011 to
November 2011
Roads Network Structures Assets Engineer
Highway Structures Inspection Procedure (AAR-AMPR-057)
(Doha, Qatar)
The document will be part of the quality management policy of the agency. This will serve as the future guidance of the maintenance bridge engineers. x Involved in the research of the different world best practice procedures used. x Individual contributor in the identification of the different inspections processes. x Engaged in the formulation an effective Qatar highway structures inspection procedure.
Previous Employments:
September 2010 to
March 2011
Sr. Civil Engineer (Structural)
Southern Negros Geothermal Power Plant (SNGP) Assessment of Cooling Tower Basin (Negros Oriental, Philippines)
Involved in the structural assessment of the more than 27 years old concrete cooling tower basin. Work involved the in-depth ocular inspection of the basin, identification of probable cause of defects found, preparation of a detailed report outlining the condition of the cooling tower basin, repair recommendation and the recommended structural design parameters based on the recent National Structural Code of the Philippines (NSCP). June 2010 to October
2010
Sr. Civil Engineer (Structural)
Mine Access Road Tampakan (MART) Detailed Engineering Design (South Cotabato, Mindanao, Philippines)
Involved in the Detailed Engineering Design of the proposed access road from Crossing Rubber, Municipality of Tupi to Bong Mal, Tablu, Municipality of Tampakan. The access road involves several existing short span bridges and 7 box culverts as well as new structures that are being designed to safely carry a 187 tonne maximum cargo weight to be loaded on a multi-axle trailer.
x Identified as the Structure Engineer on Record (signed and sealed the Issued for Construction) for the design of new structures.
x Performed structural assessment of the existing bridges and culverts to carry cargo loaded on a multi-axle trailer.
x Prepared the assessment and design report.
December 2009 to
June 2010
Civil Engineer (Structural)
NLEX-SLEX Connector Project Detailed Feasibility Study (NCR Philippines) Involved in the feasibility study concept design of a proposed 13 kilometer elevated expressway connecting the North Luzon and the South Luzon expressways. x Performed a walk through centerline survey of the aligment to visually identify any JFAmorosa – CV 7/ 11
design constraints.
x Engaged procurement of geotechnical investigation services. x Performed series of optional study of several superstructure types, preliminary sizing of structural members.
x Supervised the proposed layout of columns along the proposed road alignment. October 2009 Civil Engineer (Structural)
Burgos Wind Farm Tender Assessment
(Ilocos Norte, Philippines)
Involved in the evaluation of tender focusing on civil and structural items of the proposed 86MW Wind Farm, with the tender evaluation, shortlisting and technical due diligence headed by PB Australia.
November 2007 to
October 2009
Design Engineer (secondment staff)
Dubai Metro Red Line Project
(Dubai, United Arab Emirates)
Assigned as a secondment staff to the Design Section of the Japan Turkey Metro Joint Venture (JTMJV) to review the structural design drawings and calculations of the Red Line Overground Stations Type 2 (Over hanging Station on a Cantilever Beam) and Section Context Planning (SCP – composed of Entrance Pod and Foot Bridge structures which connect commuters to the station). The structural design is checked in relation to the architectural, mechanical and electrical design. The design drawings were prepared by W.L. Atkins and Partners Overseas. Also performs miscellaneous structural design calculations as required, based on British Standards. x Performed structural design checked in relation to the architectural, mechanical and electrical design.
x Reviewed the structural drawings issued for construction (IFC) for any discrepancies and inconsistency.
x Involve in the review and comments of complete set of the structural, architectural, mechanical, electrical, combined services drawings (CSD) and structural – electrical
– mechanical (SEM) drawings.
x Prepared review and comments report to be submitted to the designer. x Performed structural analysis and design calculation for the tunnel temporary separation wall and the slab steel frame for the mechanic access door. x Conduct site inspection resolving any construction difficulties and quality issues. x Prepare recommendation and amendments reports.
x Attend structural coordination meeting with construction managers, consultants, designers and other engineering managers.
September 2007 to
November 2007
Civil Engineer (Structural)
Digitel Phase 6 NCR & South Luzon Expansion Project
(Luzon Island)
Involved in the design of the structural foundations and reviewed the design calculations
(provided by the client) and loadings for the 30m to 50m high standard self-supporting tower, 30m to 42m high standard guyed tower and 12mmaximum height standard monopole with bipod tower for GSM mobile telephone antennas. Standards used were the National Structural Code of the Philippines (NSCP) and the Telecommunications Industry Association / Electronic Industries Alliance Structural Standard for Antenna Supporting Structures and Antennas (TIA-222-G). Conducted a design peer review. May 2007 to
September 2007
Structural Engineer (secondment staff)
Singapore MRT Circle Line Stage 4 & 5 (CCL Stage 4 & 5) (Singapore) A 17-km long underground railway with 11 stations which will be linked to the existing Singapore MRT rail network and is estimated to cost about SG$2.5 billion to build. Construction is ongoing and completion is expected on 2010. x Review the issued for construction drawings of the underground stations and check for any discrepancies.
x Involves the complete set of the structural, architectural, mechanical, electrical, combined services and structural – electrical – mechanical (SEM) drawings. x Prepared review and comments report to be submitted to the designer. x Meeting with the design coordinators and LTA manager to discussed the findings and remedies.
x Evaluate the as-built drawings against the IFC drawings. JFAmorosa – CV 8/ 11
x Performed design capacity checked in relation to reinforcement deficiency reflected in the as-built drawings.
May 2007 Civil Engineer (Structural)
New Zealand Rail Corporation, Structures Code Supplement Section 101: Railway Bridge Design Brief
Assisted client of NOVARE Design Ltd., in the preparation of the revised structural code supplement, Section 101: Railway Bridge Design Brief of New Zealand Railways Corporation.
March 2007 to April
2007
Civil Engineer (Structural)
50,000 Ton Twin Clinker Silo / 5,000 Ton Cement Silo Retrofit Holcim Philippines Davao Plant
Assisted the expatriate and carry out structural retrofit design of the 45m high 26m diameter twin clinker silo and 20m high 14.75m diameter steel cement silo. PCF 4-Storey School Bldg. – Vitas, Tondo Manila
Assisted the expatriate consultant in preparing the structural design and analysis of a 4- storey school building using 40ft container van.
January 2007 to
March 2007
Civil Engineer (Structural)
ONTRACK Railways Bridges Rehabilitation Project in collaboration with Novare Design Ltd., New Zealand
Bridge 28 Hokitika Line, New Zealand
Project Description: 200m, 8-span combined road-rail-pedestrian bridge with hollow-core beam spans and through plate girder spans on two-column bent piers and abutments. x Performed structural analysis & design of Single Hollow Core Beam. x Performed a vibration check to satisfy the pedestrian footpath requirement. x Support in supervision of production of drawings. December 2006 Civil Engineer (Structural)
Dawson Coal Project Shop Drawing Review
Reviewed the structural shop drawings prepared by the Dawson Alliance, against the design drawings prepared by PB Brisbane for a coal conveyor structure to be built in Queensland, Australia.
May 2006 to
December 2006
Civil Engineer (Structural)
ONTRACK Railways Bridges Rehabilitation Project in collaboration with Novare Design Ltd., New Zealand
Detailed design and drafting services for the rehabilitation of various railway and road bridges located at various site in New Zealand. The project is under collation and supervision of Novare Design Limited, New Zealand. Newmarket Redevelopment, New Zealand
Project Description: Project involves the lowering of the railway in the Newmarket area. This has affected the stability of the retaining structures lining the railway walls. Ontrack has decided to replace them with new retaining structures. Also, Ontrack would like to add temporary access ramps to the railway platforms. PB was tasked to do a concept design for the tasks mentioned above.
x Check the existing structures affected by the lowering of the railway for its stability and make necessary recommendation.
x Performed structural analysis & stability calculation of the railway substructure x Support in supervision of production of drawings. Bridge 45A and 45B North Auckland Line, New Zealand Project Description: 83m 6-span and 56m 4-span railroad bridge consists consist of 6- post-tension girder bind by a transverse stress bar. x Prepare design schemes and design philosophy statement. x Performed structural analysis & design calculation of superstructure and substructure,
x Support in supervision of production of drawings. JFAmorosa – CV 9/ 11
Bridge 60a NAL, North Auckland Line, New Zealand
Project Description: 60m, 5-span railroad bridge consists of 6-post-tension girder bind by a transverse stress bar.
x Composed and prepared the design philosophy statement. x Performed structural analysis & design calculation of superstructure and substructure.
x Support in supervision of production of drawings. June 2006 Civil Engineer (Structural)
Siemens - Evap Cooler Support Structure
x Engaged in the detailed structural analysis and design of a proposed steel support structure supporting an evaporator cooler.
x Prepared the structural design report.
x Supervise the production of drawings
May 2006 Civil Engineer (Structural)
Holcim Philippines Cement Plant in Bulacan, Pre Heater Tower Structural Design x Performed a detailed structural analysis and design of a proposed two-story steel pre-heater tower
x Prepared the structural design report.
x Supervise the production of drawings
April 2006 to May
2006
Civil Engineer (Structural)
Holcim Philippines Cement Plant in Davao, Raw Meal Silo and Pre Heater Tower Design Investigation
x Engaged in the detailed design check and investigation of a collapsed 54m high raw meal silo and a damaged 66m high steel Pre Heater Tower. x In coordinated and discussed with Holcim Philippines and Holcim Switzerland on possible remedial and structure strengthening measures. x Prepared the remedial and structure strengthening measures report. March 2006 to April
2006
Civil Engineer (Structural)
MMURTRIP P3 Marikina Bridge Ramp B Redesign
x Involved in the redesign of a proposed 102m long
Contact this candidate