Curriculum Vitae
Johnny Haddad,
Diploma (MSc.)
Personal data :
-Nationality: Canadian
-Gatineau Canada
-Date of Birth: 16 May 1962
-Home airport: Ottawa
-Email: adjfgx@r.postjobfree.com
Tel: +1-819-***-**** (Mobile Canada)
+1-819-***-**** (Home Canada)
Availability (2 weeks).
Freelance.
Education:
BS / M.S. in Electromechanical Engineering 1990
Kiev- Polytechnic Institute - Ukraine
Technical educational certificate 1995
Quebec University Hull Canada
Engineering Seminars:
ETAP- Canada 2008
Quality Seminars:
DIN- Germany- 2004
CNAM- France - 2003
IRI- Lebanon - 2003
Safety Workshops:
IIF- Incident and Injury –Free Tengizchevroil Kazakhstan
JHA – Job Hazard Analysis Tengizchevroil Kazakhstan
Other certificates;
Electrical Work permit Level 5 - Kazakhstan Uralsk Government Energy Authority
HSE Management Leadership Training & Workshop –
OSHA 10 Hour Outreach Course
EHHA (Hazardous Area Classification and Design) Australian standards
EHHA (Hazardous system Inspection Competency’s)
Written and spoken Languages:
English, French, Russian and Arabic (Native)
BRIEF SUMMARY:
Professionally qualified and highly experienced Electromechanical Engineer offering over 26+ years’ experience in Engineering Management, Consultancy, Design, Engineering, Construction, Maintenance, Production, Occupational Health Safety and Quality, Independent lecturer and Training services within the Electrical, Electromechanical and Instrumentation, Offshore and Onshore Oil and Gas Industry.
Fully experienced in the projects from FEED to Operational Production; implementing International Standards IEC, IEEE, IEC Ex, AS/NZS and HSEQ Engineering.
Construction support for offshore and onshore oil and gas platforms
Engineering, construction and commissionning support for Electrical Combined power plant
Review, prepare and approve Project scope of work
Review, prepare and approve project specifications
Review, prepare and approve Purchase orders and Request for proposal (RFP) for Electrical Package
Review, prepare and approve Electrical engineering documentations:
1.PDMS logic diagrams
2.PDMS I/O list
3.Power studies (Short circuit, Load flow, Harmonic studies, Motor starting studies, Stability studies, Heat calculation, UPS sizing studies, Lighting studies, Lightning studies, Cable sizing)
4.MV and LV Transmission lines
5.Load shading (Logic and philosophy)
6.Single line diagrams
7.Schematic diagrams
8.Interconnection diagrams
9.Layout drawings
10.Prepare and approve commissioning procedure
Review and approve Vendor Electrical packages (HV Switchboards, MV Switchboard, LV Switchboard, MCC, AC Distribution boards, DC Distribution boards, Control panels, etc..)
Review Vendor Mechanical packages (Turbine generators, Water treatment package, Fire system package, Diesel Emergency Power system, Air compressors, HVAC system, Flash compressors, etc…)
Review, approve procedures and attend Vendor FAT (Factory Acceptance Tests) for Electrical and Mechanical Packages
Review, approve procedures and attend SAT (Site Acceptance Tests) for Electrical and Mechanical Packages
Review, issuing and approve Final vendor dossier
Review and prepare CTRs and ESDRs
Review and prepare Hazardous area classification and certification report
Review and prepare Instrument calibration procedure
Knowledge of EMC system
Knowledge of Chevron, Shell, AGIP and Total Standards and Specifications
Prepare and monitor Contractors Electrical site tool box
Prepare and review the required Risk assessment documentations for the related works
Work Experiences:
26 years experiences in Electromechanical Works
In charge of:
Design, Engineering, Construction, Material procurement, Supervision, Commissioning, Consultant and Independent Lecturer in Electromechanical Engineering, Testing of all type of Electromechanical and Instrumentation works such as:
Power plant
Oil and Gaz plant
Building Construction
List of projects:
Freelance consultant and independent lecturer in electro-mechanical engineering
November 2019:
Lecturer of seminar in Abidjan “Ivory-Cost”
Lecturer On behalf of SALVOGLOBAL : Three days regional training course on “Advanced Electrical Maintenance and troubleshooting” at Radisson Hotel, Ivory-Cost.
January 2018 :
Feed and construction of 15 commercial blocks in Beirut - Lebanon
Review engineering drawings and specifications for waste management facilities in Lebanon
July-2012 till 2017: Senior Electrical & Power system project Engineer. Consultant on behalf of the Client INPEX – TOTAL
Ichthys project
CPF FPSO Engineering Division
Goeje Island / South Korea
Houston. USA. WOOD MUSTANG engineering office
In charge to follow up the detail engineering design, Field engineering, Vendors selection, Material and equipment purchase orders review and approval, Kick off meetings, Vendor factory acceptance tests, Site acceptance tests and Construction project support. Review and approval of commissioning procedures
-Supervision for Electrical engineering and construction of Living quarter/ Hull and Topside
-Supervision for Electrical engineering and construction of HV and LV Swicthgear rooms (ABB vendor and Emersons main vendors)
-Supervision for engineering and construction of emergency Diesel generator
-Supervision for engineering and construction of explosion proof switchboards / distribution boards and panels
-Supervision for engineering and construction of all electrical and instrumentation cables
-Attending and participating with review all modules
-Supervision for engineering and construction of electrical and instrumentation cable and cable trays routing
-Supervision for engineering and construction of Navigation aids systems
-Supervision of pre-commissioning and commissioning works.
April 2009- 2012 : Lead Electrical Engineer. Consultant /Specialist on behalf of the
Client PTTEP - TOTAL
Bongkot project Phase 4A
Bongkot Offshore / Onshore engineering Division Yard
Ulsan, South Korea
PPT Exploration and Production PCL (PTTEP) with Partners TOTAL Exploration and Production Thailand (TEPT) and British Gas Thailand Ltd. (BG) are developing Greater Bongkot South (GBS) field.
The Phase 4A of GBS field including the following:
1-PPS- Production Platform
2-QPS- Living Quarter Platform, bridge linked to PPS
3-FPS- Flare Platform South 1, bridge linked to PPS
4-WPS1- Wellhead Platform South1, bridge linked to PPS
5-WPSx- Remote Wellhead Platform South and Sea lines to PPS
In charge to follow up the detail engineering design, Field engineering, Vendors selection, Material and equipment purchase orders review and approval, Kick off meetings, Vendor factory acceptance tests, Site acceptance tests and Construction project support.
Review and approval of engineering documentations:
1-PDMS logic diagrams
2-PDMS I/O list
3-Power studies (Short circuit, Load flow, Harmonic studies, Motor starting studies, Stability studies, Heat calculation, UPS sizing studies, Lighting studies, Lightning studies, Cable sizing)
4-Load shading (Logic and philosophy)
5-Single line diagrams
6-Schematic diagrams
7-Interconnection diagrams
8-Layout drawings
9-Field Engineering
Review and approval of Equipment and material Purchase orders
Review and approval of Vendor Electrical packages
Review and approval of Vendor Mechanical packages
Review and approval for procedures and attend Vendor FAT for Electrical and Mechanical Packages
Review, approval and supervision of pre-commissioning and commissioning works
Attend Fat tests for the following packages:
1-Solar Turbine Packages (USA): 3Turbine generators for 7.5 MW each
2-Converteam Generator ( UK): 3 Generators for 8125 KVA 6.6 KV each
3-Diesel Generator Package (2H – Energy France): One package of 1825 KVA 400 V
4-High Voltage 6.6 KV Switchboard (ABB- Korea)
5-LV. Voltage 400 V Switchboard MNS IS ( ABB – Korea)
6-PDMS System (ABB – Singapore)
7-24 VDC UPS systems (AEG Singapore)
8-48 VDC UPS system (AEG Singapore)
9-120 VDC UPS system (AEG Singapore)
10-230 VAC UPS system (AEG Singapore)
11-120 VDC Distribution boards Explosion proof type (COOPER Crouse-Hinds Germany)
Explosion proof Battery isolator Boxes ( CEAG- Germany)
12-Low voltage distribution boards Prima type. ( SCHEIDER Korea)
13-Low voltage distribution boards for HVAC system
14-High Voltage and low voltage cables manufacturing (JS Cables Korea)
Field engineering and construction support
Jan 2007 – Lead Electrical Engineer, WorleyParsons
March 2009 Kazakhstan - Atyrau:
1-GUP Gas Utilization Project - TCO Tengiz
2-SEP Sulfur Expansion Project – TCO Tengiz
3-NWKC Kashagan Development Experimental Program AGIP Aktau
Input to coaching, teaching, mentoring and effective supervision of assigned personnel.
Assist in the developing and implementation of Electrical Engineering administrative and technical practices, specifications, and procedures.
Monitor and implement Quality Checking Procedures
Responsible for developing Project Electrical Engineering CTR’s for review with Chief Engineer.
Responsible for input into the Plot Plan development and maintenance.
Assure that design continuity is maintained throughout the entire project.
Reports to the Chief Engineer the status of Electrical Engineering activities and Deliverables.
Ensure communication flow, both verbal and written, is maintained within Electrical Engineering and with other engineering disciplines
Coordinate Electrical design activities with other engineering groups.
Identify deviations in job scope, estimates changes, and initiates PVN’s for review with Chief Engineer.
Prepare and distribute design instructions pertaining to plant design requirements and drafting procedures.
Represents Electrical Engineering in meetings with suppliers, subcontractors, licensors, clients, and other Company disciplines
Produce documentation required for conference or meeting notes.
Submit Project Design standards, specifications, documents and drawings for issue
Assist in the development of the Electrical Engineering Section of the project completion report.
Stand in for Chief Engineer if required during periods of absence.
On assignment to the field, Electrical and Instrumentation engineering and construction coordination, measurements, acts of acceptance, and other site engineering activities.
Oct. 2005- Dec.2006 Electrical Superintendent – Petrofac E C P–
AGIP - KCO Karabatan project – Atyrau, Kazakhstan
Electrical and Instrumentation Engineering and construction coordination
2004-2005 Lead Electrical Section Engineer /
Head of E&I Department
Oman- Sohar Industrial Infrastructure
Consolidated Contractors Company
Identification and analysis of Electrical requirements and alternatives
Identification of applicable international codes and standards
Ensure the general design in compliance with HSEQ requirements
Identification of applicable Engineering procedures and practices
Identification and application of Engineering related lessons learned
Input through Line Manager on Contract strategies with focus on Engineering needs
Attendance at engineering reviews undertaken by the feed contractor
Involvement in Feed phase risk assessments and hazard reviews.
Input to Engineering reviews and assessments
Interface through Engineering Manager with field engineering to ensure field modifications are captured and incorporated at Feed stage where applicable.
Knowledge and Compliance of: Standard ISO, TQM and Quality system, International Standard and Codes, Health, Safety, Environment, Quality, Plant Design: Electrical Design,
Power generation and distribution Construction & Installation: Inspection, Installation, and testing techniques
2003-2005 Senior Chief Engineer,
Industrial Research Institute
Lebanon- Lebanese Industrial Ministry
Head of Metrology department, Laboratory and Quality Control of Metrology Lebanese Industrial Standards
2000-2003 Section Electrical Engineer,
Kazakhstan- Karachaganak Projects
Consolidated Contractors Company
Head of E&I Department at Early Works
1-Design and Construction of 33 KV overhead line design (Grid system)
2-Construction and design of 6 KV overhead line (Grid system)
3-Design and Construction of 9 Substation 33KV / 6KV / 0.4 KV
4-Electrical safety and Construction Coordinator with Local governmental Authorities
1999-2001 Section Electrical Engineer,
Kazakhstan- Karachaganak Projects
Consolidated Contractors Company
E&I Section Engineer at Main Works (Unit2)
1-Saipem ENI – Consolidated Contractors Company Consortium
2-Head of Calibration and Instrumentation Laboratory, (More than 4000 instruments have been calibrated and certified by Local authority)
3-Supervision of installation Earthing, Lightning, and EMC systems
1996-1999 Electrical Engineer,
Combined Power Plant 450 MW
Electricity of France EDF-CNET
Lebanon
Consultant on the behalf of the Client, in charge of:
1-Approval and acceptance of Electrical and Instrumentation design,
2-Review and approval of Safety procedures,
3-Follow up Construction progress
4-Compliance with engineering drawings
5-Pre-commissioning
6-Commissioning and Testing
7-Handover of the power plant
1990-1994 Residential Electrical Contractor
Lebanon- Beirut
Building Electrical engineering and construction works:
1-ST.Sauveur Church and House (Jeita / Beirut)
2-High private school (Ablah /Lebanon)
3-Different residential buildings