AASHISH ROY M.Sc, M.Sc, Ph.D

EVA Enterprises

Director and Founder

Building No 2-14-80/A

Parli Complex, Gunj Area

Yadgir 585201, Karnataka, India

Email: adjdfn@r.postjobfree.com, adjdfn@r.postjobfree.com

Mobile: +919*********

WORK SUMMARY

Over 9 years' of teaching experience of Materials Chemistry and 8 years of Nanotechnology

research profession and have a strong background in wet chemical synthesis of nanomaterials,

excellent interpersonal skills and the ability to communicate effectively. Currently, I am serving as

Director and Founder of EVA Enterprises which is established in 2019 April. Our small scale

manufacturing unit for Building chemicals had successfully developed unique graphene based

product for waterproofing, fixsol, SBR latex, crack fillers etc. I served as an Academic Director &

Principal, S. S. Tegnoor Degree College, Kalaburgi and Visiting Guest faculty in Department of

Materials Science, Gulbarga University, Gulbarga, India. I served as an Assist Professor in

Industrial Chemistry department, Addis Ababa Science & Technology University (AASTU),

Ethiopia, Assistant Professor in Engineering Chemistry in K.B.N. College of Engineering and

coordinator for B.E graduate internal examination. Also I served as a divisional region squad

member in Visvesvaraya Technological University (VTU) for 2014-2015. I have completed my Ph.D.

degree in Materials Science on the topic Synthesis, characterization and gas sensing studies using

conducting polymer ceramic nanocomposites under the guidance of Dr. M.V.N. Ambika Prasad

and a Master Degree from same Department. In my doctoral research, I have developed new

methods for the preparation of functional nanomaterials, structural nanomaterials, nanocomposites

and tested against LPG, various test gases like Benzene, Cyclohaxane, Toluene etc. and humidity in

which both response and reproducibility are explicitly satisfied. Later, I joined postdoctoral

research under the guidance of Prof. Praveen C Ramamurthy at the Indian Institute of Science,

Bangalore. I was working on major topics i) Synthesis of conducting polymer for malonaldehyde

sensing, ii) Fabrication of nanocomposites for packing application, iii) Fabrication and

characterization of diodes using CPs, iv) Transport property of Nanocomposites. I have been

fortunate to expose with the higher end research instruments and had hands on experience in

various analytical techniques like Scanning Electron Microscope, Atomic Force Microscopy,

Physical Vapor Deposition (PVD), DSC/ TGA instruments, Fourier Transmission Infrared

Spectroscopy, UV-Vis Spectroscopy, Cyclovoltametry, Hokki Source meter etc which will be helpful

to carry out the research work. In my credit, I have published 62 papers, 1 patent and 20 conferences

proceeding of about 1300+ citation indexes with h-index 20 and i-index 40. I am also serving as an

editorial member and reviewer for many reputed International and National journals. I am one of

the members of the Technical Program Committee in the Global Conference on Polymer and

Composite Materials (PCM) from 2015 - 2018.

HIGHLIGHTS

Development of a new synthetic route for rapid synthesis of conducting polymer nanocomposites

for battery applications.

Preparation of nano metal oxide, ceramic, porous materials, thin films etc by chemical as well as

physical methods.

Identify and optimization of new synthetic method for the rapid production of nanometal oxide

resulting in significant cost reduction, and thus making it an industrially viable process

CV of AASHISH ROY Page 2 of 14

Created a simple cost efficient method to synthesize nanofibers, nanorods and nanocombs for

Humidity and LPG sensing.

Fabrication of proto type sensor set up for laboratory and domestic uses.

Acrylic and elastomeric waterproofing compounds.

Graphene based waterproofing materials.

Lime stabilizer FIXSOL for better adhesion and stability against odd weather.

Water based organosilaxne as water repellent agents.

EDUCATION

Qualifying Name of University/Board/ Duration Area of Full Marks %/

Exam Institution Institute of Specialization Time or Grade

study Part

From / To Time

Govt High Karnataka Secondary 2000 Science Fulltime 52.96

10th School Education Social

Examination Board Science

Mathematics

SVM College Pre-University 2000 Physics Fulltime 44

12th Education Board Chemistry

2002 Mathematics

Biology

SVM College Karnataka University 2002 Chemistry Fulltime 64.67

UG Botany

2005 Zoology

Gulbarga Gulbarga 2005 Materials Fulltime 70.92

PG University University Science

2007

Gulbarga Gulbarga University 2008 Materials Fulltime Awarded

PhD University Science

2012

PG Karnataka State Karnataka State 2013 Chemistry Part 73.06

Open University Open University time

2015

Post Indian Institute Indian Institute of 2012 Materials Fulltime Awarded

Doctoral Of Science Science 2013 Engineering

Fellow

KEY EXPERTISE AND SKILLS

Chemical synthesis of size and shape controlled metal oxide nanomaterials (titania, titanates, Zinc

oxide, cadmium oxide and ferrites) using colloidal approaches (sol-gel, microemulsions), for sensor

and antimicrobial studies.

Synthesis of porous metal oxide materials using organic template methods

Hydrothermal and solvo-thermal synthesis of titania, zinc oxide and ferrites and utilizing electric

oven and microwave reactor.

Synthesis of magnetic and non magnetic materials by employing coprecipitation, combustion, SPCR

and microwave acetate route.

Preparation of nanostructure thin films of non-conducting blends by hot pressing method.

Synthesis of nanoferrites / metal oxides by employing solid state method.

Electrochemical detection of heavy metal ions using different modified electrodes.

Fabrication of electron device employing conducting polymer to study the IV characteristics of

diodes, MOSFET.

Synthesis of novel nanomaterials by biological routes (bacteria, fungi, actinomyceta and plant

extract).

CV of AASHISH ROY Page 3 of 14

Synthesis of polymer ceramic nanocomposites by in situ/interfacial method,

Determination of crystal structure and morphology of the materials using XRD, Raman Spectra and

Scanning Electron Microscopy, Atomic Force Microscopy, Transmission Electron Microscopy etc

Thermal stability of nanocomposites/oxides/ferrites using thermal analyzer (TGA-DSC instrument).

Transport studies by using two/four probes dc and ac conductivity.

Analysis and interpretation of pore size, pore volume, surface area using BET Surface area analyzer

Interpretation of surface elemental composition and amount of dopants using XPS spectra

Identification of optical absorption and surface functional groups using UV-Vis absorption and

FTIR.

Fabrication of prototype sensor set up for demonstration in laboratory.

Capacity to complete planned objectives within set deadlines and budgetary commitments

Ability to consolidate results and effectively communicate in seminars/conferences and journals

HAND-ON EXPRIENCE WITH INSTRUMENTS

Scanning electron microscopy (SEM) (GeminiSEM from Zeiss Microscopy)

Physical Vapour Deposition (PVD) - Oxford Instruments

MicroCal's - Differential Scanning Calorimetry and Isothermal Titration Calorimetry

Nanoscribe's 3D printers

Optical Control system (OPC)

Scanning Near Field Optical Microscopes (WITec)

Nanoscale infrared absorption spectroscopy (Nano-IR2-Fs from Analysis Instruments, USA)

UV-Vis spectrometer

Fourier transforms infrared spectroscopy

Keithley Source Meter (50 5 MHz)

DC conductivity measurement set up

Thin Film Deposition System - Sputtering

Sensor set up

PROFESSIONAL EXPERIENCE

Gulbarga University, India Doctoral Researcher March 2008 Jan 2012

Goal: Synthesis, characterization and gas sensing studies using conducting polymer ceramic

nanocomposites

Preparation of nanosized metal oxides (TiO2, ZnO, CdO, ZnFe2O4 etc) by chemical methods such as

sol-gel route, combustion method, SPCR, Microwave acetate route, Alginate method etc.

Synthesis of polyaniline metal oxide nanocomposites fiber for the detection of Liquid Petroleum Gas.

Achieved sensing of LPG at room temperature using conducting polymer ceramic nanocomposites

fibers.

Fabricated prototype gas sensor set up for demonstration in laboratory.

Indian Institute of Science, India Postdoctoral Researcher Feb 2012 Jun 2013

Goal: i) Fabrication of Organic photovoltaic cell and various diodes using conducting polymer and its

nanocomposites.

ii) Synthesis of functionalized Graphene and fullerene based conducting polymer.

iii)Synthesis of conducting polymer and its copolymer by electrochemical methods for sensor

application.

The various diodes are fabricated using different electrode (Al, Cu, Ag and Ni) coated over

polyaniline and P3HT polymer - ITO glass.

CV of AASHISH ROY Page 4 of 14

TEACHING EXPERIENCES

Department & Institute Year Subjects

Doctoral Researcher in Materials Aug 2008 Chemistry of Nanomaterials and

Science, Gulbarga University, Feb Nanocomposite, Introduction of

Gulbarga, Karnataka, India 2012 Nanocomposite, Materials characterization.

Postdoctoral Researcher in March Fabrication of Organic photovoltaic cell and

Materials Science and 2012 various diodes using conducting polymer and

Engineering, Indian Institute of May 2013 its nanocomposites.

Science, Bangalore Karnataka,

India

Assistant Professor in Chemistry, Jun 2013 Solid State Chemistry, Materials Science,

S.S.Margol Degree College, to Feb Nanomaterials, Quantum Chemistry.

Shahabad, Gulbarga, Karnataka, 2015

India

Assistant Professor in March Electrochemistry, Water Technology, Battery

Engineering Chemistry, K.B.N. 2015 to Technology, Nanomaterials, Fuels, Polymer etc

Engineering College, Gulbarga, Feb 2016

Karnataka, India

Assistant Professor in School of May 2016 Industrial Chemistry, Inorganic chemistry,

Applied Science, Department of to Jun Industrial Nanomaterials, Water Technology,

Industrial Chemistry, Addis 2018 Renewal Energy, Electrochemistry

Ababa Science & Technology

University, Ethiopia

Academic Director and Associate July 2018 Physical Chemistry, Materials Chemistry,

Professor in Chemistry to March Nanotechnology

S.S.Tegnoor Pre-University & 2020

Degree College,

Kalaburagi - 585105

Karnataka, India

INDUSTRIAL EXPERIENCES

Manufacturing Industry: EVA April Product List: 1. Fixsol, 2, SBR Emulsion, 3.

Enterprises, Director and Crack filler, 4. Acrylic and Elastomeric

2010 to

Founder, Building No 2-14-80/A waterproofing materials, 5. Graphene

Parli Complex, Gunj Area till based organo-siloxane compounds.

Yadgir 585201, Karnataka, India

ONGOING PROJECTS:

1. Dr. Aashish Roy (PI), Dr. Ibrahim Nasser (Co-PI), Mr. Tesfaye Eshete Asrat (Co-PI), Mr. Sirak

Teketel (Co-PI), Project entitled: Extracellular biosynthesis of novel metal nanoparticles using

plant extract and its antimicrobial activity against pathogens microorganism for wound healing,

Internal Research Grant EA-323/2-1/18, dated: 02.03.2018, Addis Ababa Science and

Technology University, Addis Ababa is awarded the amount of Birr 275,000.00 (Rs. 6, 32, 500).

2. Dr. Ibrahim Nasser (PI), Mr. Wassie Mersha (Co-PI), Dr. Aashish Roy (Co-PI), Dr. Yeshitila

Asteraye (Co-PI), Project entitled: Magnetic Nanoparticles with in poly (acrylic acid) nanogel in

CV of AASHISH ROY Page 5 of 14

Cellulase immobilization and catalysis for bioethanol production, Internal Research Grant

sanctioned on 07.12.2017, Addis Ababa Science and Technology University, Addis Ababa is

awarded the amount of Birr 395,000.00 (Rs. 9,08, 500.00)

PROJECTS COMPLETED:

1. Won the senior research project grant on the topic Synthesis of conducting polymer

composites Internal Research and Technology Transfer Grant sanctioned void no:

AASTU/1004/4763/11 dated May 8, 2018, Addis Ababa Science and Technology University,

Addis Ababa is awarded the amount of Birr 8,000.00 (Rs. 18, 400) (Completed).

UNIVERSITY AND DEPARTMENTAL RESPONSIBILITY

Academic Director, S.S.Tegnoor Educational Trust, Kalaburagi, Karnataka, India

Member of Laboratory committee, Department of Industrial Chemistry, AASTU

Member of Research Committee, College of Applied Science, AASTU

Member for Curriculum development committee, Department of Industrial Chemistry, AASTU

Member for Curriculum development committee, Center for Excellence of Nanotechnology,

AASTU

Member of Divisional Region Squad in Visvesvaraya Technological University for 2014-2015

Head of the Engineering Chemistry, K.B.N. Engineering College, Gulbarga for 2014 2015

RESEARCH EXPERIENCES

Worked under DST project entitled Development of Humidity and Gas sensors using conducting

polymer ceramic nanocomposites sanctioned to Dr. M.V.N. Ambika Prasad, Principal Investigator,

Department of Materials Science, Gulbarga University, Gulbarga, Karnataka, India

MEMBER OF PROFISSIONAL BODIES

1. Selected as a Research Advisor in Nan Yang Academy of Science (NAS), Singapore, 2018

2. Editor-in-Chief, Journal of Medical Tissue Biomechanical Engineering, Bilingual

Publishing CO, Singapore

3. Electrochemical society member

4. Serving as Associated Editors for Academic Journal of Polymer science

5. Serving as a Chief Technical Advisory Board member for International Journal of

Engineering and Advanced Technology.

6. Serving as Lead Guest Editor for Journal of Nanotechnology publish by HINDAWI

7. Serving as Lead Guest Editor for Micro and Nanosystem publish by Bentham Science.

8. Serving as an Editor of International Journal of Scientific Research & Nano Technology.

9. Serving as an Editor of International Journal of Scientific Research & Chemical Engineering.

10. Serving as an Editor of International Journal of Scientific Research & Nano Biotechnology.

CV of AASHISH ROY Page 6 of 14

11. Editor and editorial board member

a. Journal of Materials Science and Technology (OJAS Publication)

b. Journal of Nanoscience and Nanotechnology

c. American Journal of Nano Research and Application (NANO)

d. Journal of Advanced Physics

12. Member of Rural child education development, Raichur

13. Graduate Association member, Sindhanur, Raichur, Karnataka, India

14. Member of Karnataka Rajya Vijnana Parishat, Karnataka, India

REFEREES OF INTERNATIONAL / NATIONAL PUBLISHERS

Elsevier publication, Springer Science, Wiley Blackwell and Wiley VCH publication, American Scientific

Publication, The Royal Society of Chemistry, American Chemical Society, Taylor and Francis journal etc.

FELLOWSHIPS AND GRANTS

SRF - DST, Dept. of Materials Science, GUG, from June 2010 July 2011.

JRF - DST, Dept. of Materials Science, GUG, from July 2008 June 2010.

PATENT

Raghunandan Deshpande, Venkatramana Abbaraju, Ganesh Snajeev, Appalaraju.S,

Mashesh.D.Bedre, Vijaykumar. B. Malashetty, Devedrappa Kage, Aashis.S.Roy, Ravishankar Bhat,

Sharanabasava Ganachari, file a patent on Process for using nanoparticles as novel anti-

sprouting agents application number, 1170/CHE/2012 A, Accepted: 20/04/2012.

STUDENT SUPERVISORSHIP

B.Sc students 2016 -17 batch Project completed

1. Yakob Godebo, 2. Chernet Tadesse, Antimicrobial properties of prepared

3. Meklit Girma, 4. Samrawit Kiftew medicinal oily bar soap by Colgate Neem oil

continuous soap manufacturing process

B.Sc students 2017 -18 batch I

1. Daniel Gezahegn 2. Hussein Mohammed Synthesis of conducting polymer composites

3. Mulualem Mulat 4. Habtamu Jemberu

5. Hailu Sheferaw 6. Kidus Yaregal

7. Amanueal Fitsum

B.Sc students 2017 -18 batch II

1. Sisay Reba 2. Seyoum Abebayehu Conversion of plastic to gasoline fuel using

3. Teklu Gadisa zeolite catalyst

CITATION INDICES

Citation Indices All Since 2014

Citations 1027 855

h-index 18 16

i-index 31 28

Citation website:

https://scholar.google.co.in/citations?user=dl-WfX0AAAAJ

https://www.scopus.com/authid/detail.uri?authorId=370********

CV of AASHISH ROY Page 7 of 14

BOOK & CHAPTERS PUBLISHED

1. Aashish Roy, Hybrid polyaniline nanocomposite for humidity sensing published by Lulu Press

Inc. 627 Davis Drive, Suite 300, Morrisville, NC 27560, USA 2018

(http://www.lulu.com/spotlight/AashishRoy)

2. Aashish Roy, The text book of Industrial Chemistry by Lulu Press Inc. 627 Davis Drive, Suite 300,

Morrisville, NC 27560, USA 2018

(http://www.lulu.com/spotlight/AashishRoy)

PUBLICATIONS IN REPUTED JOURNALS

1. Juhi Nishat Ansari, Sanjaykumar C. Gowre, Mahesh V. Sonth, Baswaraj Gadgay, and Aashis S.

Roy, Photonic Nano Dielectric Crystal Cavity with Infiltrated Biosamples for Refractive Index

Sensing Application, Integrated Ferroelectrics, (Accepted 20210) (GINF#1859827) (IMF 0.5)

2. Md. Nasir Ali, S. Chakradhar Goud, Aashis S. Roy, A facile and large-area fabrication method of

superhydrophobic selfcleaning polysiloxane/TiO2 nanocomposite flms and its dielectric

properties, Journal of Materials Science: Materials in Electronics, (2020)

https://doi.org/10.1007/s10854-020-03807-8 (IMF -2.195)

3. M. Yasmin Begum, Yahya Alhamhoom and Aashis Roy, Study of antimicrobial and DNA

cleavage property of biocompatible silver nanoparticles prepared by using Ficus carica L,

Materials Research Innovations, (2020) DOI: 10.1080/14328917.2020.1753335

4. R. D. Balikile, Aashish S. Roy, Ameena Parveen, G. Ramgopal & Nacer Badi, Hybrid Nickel

Ferrite Nanotubes Doped Polyaniline Nanocomposite and Its Dielectric Properties, Journal of

Electronic Materials, 49, (2020) 833841(IMF -2.195)

5. OA Al-Hartomy, S Khasim, Aashis. S. Roy, A Pasha, Highly conductive polyaniline/graphene

nano-platelet composite sensor towards detection of toluene and benzene gases, Applied Physics

A 125 (2019) 12 (IMF: 1.784)

6. J Husain, SAM Nabirqudri, Aashis.S.Roy, Thermal, electrical and sensing properties of

polypyrrole/tin oxide nanocomposite, Ferroelectrics 531 (2018) 92-101 (IMF: 0.5)

7. Aashis.S.Roy, Antistatic and Dielectric properties of one-dimensional Al2+:Nd2O3 nanowire

doped polyaniline nanocomposites for electronic application, Sensors and Actuators A: Physical

280 (2018) 17 (IMF - 2.311)

8. S Khasim, M Lakshmi, HA Johani, N Badi, Aashis.S Roy, Investigations on structural and

electrical properties of polyanilinecadmium sulfide nanocomposite films for solid state

electronics, Polymer composites 40 (2019)E579-E588. (IMF - 2.324)

9. Nacer Badi, Rakesh Mekala, Syed Khasim, Aashish S. Roy, Alex Ignatiev, Enhanced dielectric

performance in PVDF/Al-Al2O3 coreshell nanocomposites, Journal of Materials Science:

Materials in Electronics, 29 (2018) 105******* (IMF -2.195)

10. Aashis S. Roy and Praveen C. Ramamurthy, Direct Impedimetric Detection and Isolation of

Bacillus Cereus using Modified Platinum Electrode, Journal of Research Updates in Polymer

Science, 6 (2017) 118-125

CV of AASHISH ROY Page 8 of 14

11. Shridhar S Bagali, Bychapur S Gowrishankar, Aashis S Roy, Optimization, Kineticsand

Equilibrium Studies on Removal of Lead (II) from Aqueous Solution Using Banana Pseudo Stem

as Adsorbent, Engineering 3 (2017) 409415 (IMF 4.598)

12. Syed Khasim, Apsar Pasha, Aashish, S. Roy, Ameena Parveen & Nacer Badi, Effect of Secondary

Doping Using Sorbitol on Structure and Transport Properties of PEDOTPSS Thin Films, Journal

of Electronic Materials 46-201*-****-**** (IMF - 1.676)

13. R.D. Balikile, Aashis.S.Roy, S. C. Nagaraju, G. Ramgopal, Conductivity properties of hollow

ZnFe2O4 Nanofibers doped Polyaniline Nanocomposites, J Mater Sci: Mater Electron, 28 (2017)

73687375 (IMF -2.019)

14. Chithrakshi, Aashis.S.Roy and Raghavendra Sagar, Structure, spectral, electrical and second

harmonic generation studies of Fe3+ doped MnS single crystals, Cogent Chemistry 2 (2016)

1269599

15. Mohd Abdul Raheem, Aashis.S.Roy, M.V.N. Ambika Prasad, Negative Thermal Coefficient

behaviour, Dielectric and Mechanical properties of poly(vinyl chloride)/ poly(vinyl alcohol)

blends, Composites Communications 1 (2016) 3843

16. Nacer Badi, Syed Khasim, Aashis S. Roy, Micro-Raman spectroscopy and effective conductivity

studies of graphene nanoplatelets/polyaniline composites, J Mater Sci: Mater Electron, 27 (2016)

6249-6257 (IMF -2.019)

17. Apsar Pasha, Aashis S. Roy, M. V. Murugendrappa, Omar A. Al-Hartomy, Syed Khasim,

Conductivity and dielectric properties of PEDOT-PSS doped DMSO nano composite thin films, J

Mater Sci: Mater Electron, 27 (2016) 8332 (IMF -2.019)

18. J. N. Ansari, Syed Khasim, Ameena Parveen, Omar A Al-Hartomy, Ziad Khattari, Nacer Badi,

Aashis.S.Roy, Synthesis, Characterization, Dielectric and Rectification Properties of

PANI/Nd2O3:Al2O3 Nanocomposites, Polymers for Advanced Technologies, 27 (2016) 1064

(IMF - 2.162)

19. Mohite R.M, J.N. Ansari, Aashis.S.Roy, Kothawale R.R, Significant enhancement in the

conductivity of al-doped zinc oxide thin films for TCO application, Int. J. Nanosci. 15, (2016)

1650011 (IMF 0.9)

20. S. C. Nagaraju, Aashis S. Roy, A. L. Latha, and G. Ramgopal, Synthesis, characterization and

dielectric study of polyaniline Pr2O3 composites, Ferroelectrics Letters Section, 43 (2016) 1-9

(IMF 0.57)

21. Aashis.S.Roy, Ameena Parveen, Nacer Badi, Syed Khasim, Electrochemical cell parameters of

poly(ethylene oxide) / (KClO3 + NaNO3) composites as polymer electrolyte in secondary solid

state batteries, Ionics 21, (201*-****-**** (IMF 2.347)

22. Z Khattari, T Abdullah, M Maghrabi, S Khasim, Aashis.S.Roy, I Alfasfous, Interaction study of

lipopeptide biosurfactant viscosin with DPPC and Cholesterol by Langmuir monolayer

technique, Soft Materials, 13 (2015) 254262 (IMF 1.132)

23. Mohana Lakshmi, Aashish S Roy, Ameena Parveen, Syed Khasim, Synthesis, characterization,

and dielectric studies of ortho-chloropolyanilinegraphite oxide composites, Journal of

Materials Research, 30 (2015) 2310 - 2318 (IMF 1.673)

CV of AASHISH ROY Page 9 of 14

24. S. C. Nagaraju, Aashis S Roy, G Ramgopal, Conductivity of surface modified TiO2 dope

nanocomposites, Measurement, 60 (2015) 214221 (IMF 2.359)

25. Aashis.S.Roy, Saravanan S, Kishore, Praveen C Ramamurthy Impedance spectroscopy of

functionalized hybrid poly(vinyl butyral)-cenosphere composites, Polymer composites, 35 (2014)

1636 -1643 (IMF 2.324)

26. Aashis S Roy, S Gupta, S Seethamraju, G Madras, P C Ramamurthy, Impedance spectroscopy of

novel hybrid composite films of polyvinylbutyral (PVB)/functionalized mesoporous silica,

Composites: Part B 58 (2014) 134139 (IMF 6.864)

27. Aashis S Roy, Satyajit Gupta, Praveen C Ramamurthy, Giridhar Madras, Fabrication of

freestanding Poly(vinylidene chloride-co-vinyl chloride)/TiO2 nanocomposite films and their

dielectric properties, Science of Advance Materials, 6 (2014) 946-953 (IMF 1.671)

28. Aashis. S. Roy, A. Parveen, Raghunandan Deshpande, Ravishankar Bhat and K. R. Anilkumar,

Microscopic and Dielectric studies of ZnO nanoparticles loaded in ortho- chloropolyaniline

nanocomposites, Journal of Nanoparticle Research, 15(2013) 14:1337. (IMF 2.020)

29. Syed Abusale Mhamad Nabirqudri, Aashis.S.Roy, M.V.N.Ambika Prasad, Electrical and

mechanical properties of free standing PMMA MMT clay composites, Journal of Materials

Research, 29, (201*-****-**** (IMF 1.673)

30. Sajjan K C, Aashis.S.Roy, Ameena Parveen, Syed Khasim, Analysis of DC and AC properties of

a humidity sensor based on polyaniline-chromium oxide composites; Journal of Materials

Science: Materials in Electronics, 25-201*-****-**** (IMF -2.019)

31. Mohd. Hashim, Alimuddin, Sagar E. Shirsath, Ameena Parveen, Aashis S. Roy, Shalendra

Kumar, S. S. Meena, Pramod Bhatt, Ravi Kumar, Study of structural, electrical and magnetic

properties of Cr doped NiMg ferrite nanoparticle, Journal of Alloys and Compounds 602 (2014)

150156 (IMF 4.175)

32. Mohana Lakshmi, Aashis S Roy, Syed Khasim, Muhammad Faisal, Sajjan K C, M

Revanasiddappa, Dielectric property of NiTiO3 doped substituted Orthochloropolyaniline

composites, AIP Advance 3, (2013) 112113 (IMF- 1.568)

33. Anuradha S, Aashis. S. Roy, M. V. N. Ambika Prasad, Synthesis, Characterization and

Microwave Properties of Polypyrrole Molydbenum trioxide composites, Science and

Engineering of Composite Materials, 21,(2013) 479483

34. Aashis S Roy, Shruti Gopalkrishna H, Ameena Parveen, Synthesis, Characterization, Ac

Conductivity and Diode Properties of Polyaniline-CaTiO3 Composite, Polymers for Advanced

Technologies, 25, (2014), 130135 (IMF -2.137)

35. Aashis S Roy, Satyajit Gupta, S. Sindhu, Ameena Parveen, Praveen C Ramamurthy, Dielectric

Properties of Novel PVA/ZnO Hybrid Nanocomposite Films, Composites Part B: Engineering 47

(2013) 314 (IMF 6.864)

36. Aashis.S.Roy, Ameena Parveen, M.V.N. Ambika Prasad, and Koppalkar. R. Anilkumar;

Influence of Ta2O5 on polyaniline surface for liquid petroleum gas sensing

applications, Emerald: Sensor Review; 32 (2013) 163-169 (IMF 1.161)

CV of AASHISH ROY Page 10 of 14

37. Ameena Parveen, Anilkumar koppalkar, Aashis S. Roy, Liquefied Petroleum Gas Sensing of

PolyanilineTitanium Dioxide Nanocomposites, Sensor Letters, 11, (2013) 242-248 (IMF 1.475)

38. Ameena Parveen, Aashis. S. Roy, Microwave studies on polyaniline- PbTiO3 nanocomposites

prepared by using sodium dodecyl benzene sulphonoic acid (SDBSA), Journal of Materials

Research, 28 (2013) 840 (IMF 1.673)

39. Rajendra D, Aashis S Roy, Ameena Parveen, Structural

Contact this candidate