Ronald E. St. Laurent Jr.

***** **** ****** ****

Vail, Arizona 85641

Home: 520-***-**** Cell: 520-***-**** Email: adjasj@r.postjobfree.com

Summary

With a desire for integrity and quality engineering, I am an experienced engineer with twenty three years of design and project management experience in HVAC, plumbing and fire protection eager to assist your firm in design construction, project management coupled with design capacity to engineer/project manage any building that would require my engineering knowledge, troubleshooting capabilities, implementation of design changes, timeline and budget tracking, ensuring of schedules and timelines, providing quality control/assurance and ensuring all safety guidelines are met. I am capable of project managing, engineering, coordinating construction of any facility that would require my expertise along with providing alternatives to maintain timelines and schedules.

Professional Experience

EPC Services Inc., Tucson, AZ, Senior Project Project Manager. 07-2018 to 02-2020

Sr. Project Manager, Tucson, AZ

Provide review engineering of HVAC, plumbing, electrical upgrades for energy efficiency

Coordinate with contractors to find workable solutions that meet budgets and time constraints

Field verify installation by ensuring documents and specifications are followed and timelines are met

Meet all guidelines within USACE design criteria and ensure the best construction methods are accomplished

Coordinate control sequences with control schedules to ensure compatibility with specifications and equipment

Assist commissioning processes and ensure documentation is accurate and complete according to sequence of operations and control schedules

Commission review and coordination of equipment captured on control schedules and connected to ECMS systems

Cross coordinate mechanical, plumbing and electrical drawings for correct circuiting and wiring

Supervised a group of seven junior engineers to facilitate observation of installations under strict guidance from assigned orders from myself

U of A Tech Park, Tucson, AZ, Senior Project Engineer CH2M Inc. 07-2017 to 07-2018

Sr. Project Engineer for CH2M, Tucson, AZ

Provide review engineering of HVAC, plumbing, electrical for all Central Utility Plant Operations

Review of hydraulic calculations to ensure NFPA standards and U of A standards are met

Coordinate with contractors to find workable solutions that meet budgets and time constraints

Field verify installation by ensuring documents and specifications are followed

Meet all guidelines within U of A design criteria and ensure the best construction methods are accomplished

Coordinate control sequences with control schedules to ensure compatibility with specifications and equipment

Assist commissioning processes and ensure documentation is accurate and complete according to sequence of operations and control schedules

Commission review and coordination of equipment captured on control schedules and connected to ECMS

Cross coordinate mechanical, plumbing and electrical drawings for correct circuiting and wiring

Coordinating design of central utility plant for U of A Tech Park

Supervised a team of technicians and engineers to oversee all work within the central utility plant making sure the University of Arizona standards were strictly followed and adhered to

Banner HC, Tucson, AZ, MEP Coordinator DPR Construction 03-2016 to 07-2017

Sr. MEP Coordinator for Banner Tucson, AZ

Provide review engineering of HVAC, plumbing, electrical for new 9 story hospital addition

Review of hydraulic calculations to ensure NFPA standards and Banner standards are met

Coordinate with contractors to find workable solutions that meet budgets and time constraints

Field verify installation by ensuring documents and specifications are followed with daily reports in CMIs

Meet all guidelines within Banner design criteria and ensure the best construction methods are accomplished

Coordinate control sequences with control schedules to ensure compatibility with specifications and equipment

Assist commissioning processes and ensure documentation is accurate and complete according to sequence of operations and control schedules

Commission review and coordination of equipment captured on control schedules and connected to ECMS

Cross coordinate mechanical, plumbing and electrical drawings for correct circuiting and wiring

Coordinating design of central utility plant for Banner University Medical Center

Supervised an engineering team to coordinate all activities of mechanical, electrical and plumbing construction of the new addition to the hospital, ensuring all Banner guidelines were followed

USACE, Fort Meade, MD, Contract Position MSS Services 01-2010 to 03-2016

Sr. Quality Assurance Engineer for USACE Fort Meade, MD

Sr. Mechanical Construction Engineer for Martinsburg VA, WV

Sr. Project Manager for USMA, West Point New York

USACE Project Management Q/A of DOD facility, BRAC133, Alexandria VA

Provide review engineering for new installations

Review of hydraulic calculations to ensure NFPA standards and USACE standards

Coordinate with contractors to find workable solutions that meet budgets and time constraints

Field verify installation by ensuring documents and specifications are followed with daily reports in RMS

Meet all guidelines within USACE design criteria and ensure the best construction methods are accomplished

Coordinate control sequences with control schedules to ensure compatibility with specifications and equipment

Assist commissioning processes and ensure documentation is accurate and complete according to sequence of operations and control schedules

Commission review and coordination of equipment captured on control schedules and connected to ECMS

Cross coordinate mechanical, plumbing and electrical drawings for correct circuiting and wiring

Provide design construction/engineering review for existing, new installations and retro-fit installations

Creation of design drawings and documents where required, tailoring specifications, review of submittals

Work with contractors to find workable solutions that meet budgets and time constraints

Update existing systems that are being replaced to comply with ASHRAE 62 and 90.1

Meet all guidelines within the VA design criteria and hospital design requirements

Solar, thermal and Geothermal design for main hospital campus barracks

Design of main central utility plant for campus

Engineered and project managed entire campus design of hot water and chilled water system upgrade

Calculated energy analysis and life cycle cost analysis with years of payback

Engineered most economical mechanical systems

Renovation of entire campus of existing systems to be converted from steam to hot water

COGEN system, CCHP systems design to accomplish (combined cooling heating power), net zero energy usage

Design of boiler system to provide 100 psi steam to surrounding buildings

HVAC, plumbing and fire protection, for two million square foot eighteen story DOD facility

Ensured timelines and budget constraints were met provided engineering support to all associated tasks

Followed costs and progress of project and managed all aspects of the project

Provided daily RMS reports for USACE

Review of hydraulic calculations to ensure NFPA standards and USACE standards

Canyon State Facility Solutions, Tucson, AZ 06-2011 to 09-2012

Sr. Project Manager/Commissioning Engineer for high rise USACE projects in Arizona, Texas and Oklahoma

Engineering support directly to USACE personnel

Engineering reviews to USACE engineering teams

commissioning of all mechanical systems

Provided value engineering, managing constructing timelines of all associated tasks of the projects

Followed all costs and progress to ensure budgets and timelines

Skidmore Owings and Merrill, LLC., Washington, DC 09-2008 to 01-2010

Design Engineer/Project Manager for Sustainable Engineering projects in USA and oversees

High rise fire protection engineering

High rise HVAC and plumbing design

Production of construction documents and specifications for multi-million dollar projects

Provided budget support to ensure that constructed timelines and budgets were met

Track costs and progress while managing all engineering aspects of the project.

Professional Skills and Training

Proficient in AutoCAD 2014 – 25 Years

Revit 2014 – 15 Years

Navisworks, Bim 360 Field, SafetyNet, CMIS PM – 3 Years

Pro/Engineer/Mechanica – 5 Years

Trane Trace 700 and Load Express – 20 Years

Microsoft Word, Excel, Access, PowerPoint and Adobe Acrobat – 25 Years

Working Knowledge of ISO9000

Experience in electrical lighting and power design, performed electrical short circuit calculations

Familiar with NEC

Education

New Jersey Institute of Technology, Newark, New Jersey BS Mechanical Engineering, Graduated Dec. 1991

Design Skills

Interpersonal/Management skills

Maximize project efficiency

Determine project costs and determine years of payback

Assist in providing sequence of construction

Research and apply adopted codes for plumbing and HVAC and fire protection

Accomplish coordination between clients, contractors and vendors

Maintain schedules and timelines

Write and interpret specifications for all conditions

Produce design documents including details and schedules

Coordinate electrical requirements necessary for mechanical equipment.

Primavera/Microsoft Project

Navisworks/Bluebeam

Contact this candidate